It is currently Wed Nov 26, 2014 8:22 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 186 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next
Author Message
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Mon Oct 21, 2013 11:38 am 
Offline

Joined: Tue Apr 20, 2004 4:39 pm
Posts: 172
jamese wrote:
I've been looking at a couple of options. One would be to change from a one piece bracket to a two piece bracket (imagine just the two sides of the current bracket).


Do you really even need a 2 piece bracket? The metal seems pretty sturdy, and mounting the drives just on one side should be fine - still much better than the flimsy plastic sleds used in lots of computers nowadays. I'm thinking a little tab of metal with the appropriate holes should be fine.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Mon Oct 21, 2013 8:03 pm 
Offline

Joined: Tue May 03, 2011 5:52 pm
Posts: 60
Location: Toronto
Mankey wrote:
Awesome! Just curious - did you check the voltage of the separate lines via mobo software or whatever while loading the system? I wasn't getting any crashes when using the quad core + 7750, but the 12 volt line was dropping as lower than 11 volts. Very bad for the voltage regulators on the mobo.


Don't think I'm having any issues if I am to believe the monitoring software (it shows the vcore moving around). I stay above 11.95v. As you mentioned earlier I think the main issue is that I only have 6 amps on the 12v line, since the crashing immediately goes away once I limit the TDP.

Impressively, my mushkin ram undervolts to 1.35v and counting. I will see how low they will go.

My i5 2400 sips power undervolted to 1.04v at stock settings (at most ~40W) so if Gigabyte ever adds vcore to the Z77N, I'll be in good shape with the i7 3770.

_________________
Lone Industries L1: i7 3770, 2x4GB Mushkin Silverline, 160GB X25-M G2, Dell U2412M + U2211H
Lian-Li A04: i5 2400, 2x4GB Mushkin Silverline, 80GB X25-M G1, 9TB FlexRAID, 1GB 5750 (passive), all on Seasonic x460, hooked up to Sony 40" EX620 + KEF 2005.3 + Yamaha RX-V667


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Tue Oct 22, 2013 4:59 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Mankey wrote:
jamese wrote:
I've been looking at a couple of options. One would be to change from a one piece bracket to a two piece bracket (imagine just the two sides of the current bracket).


Do you really even need a 2 piece bracket? The metal seems pretty sturdy, and mounting the drives just on one side should be fine - still much better than the flimsy plastic sleds used in lots of computers nowadays. I'm thinking a little tab of metal with the appropriate holes should be fine.


No, but I don't think I could live with myself. ;) Originally I wasn't going to have a bracket, and only support a single 2.5 inch drive. One of reasons why you can mount a single drive without the bracket, if you like.

Another question: I'm revisiting doing the finishing myself (powder coating most likely). Would anyone pay more for custom colours, or are people pretty content with black or white?!


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Tue Oct 22, 2013 10:19 pm 
Offline

Joined: Tue Apr 20, 2004 4:39 pm
Posts: 172
jamese wrote:
Another question: I'm revisiting doing the finishing myself (powder coating most likely). Would anyone pay more for custom colours, or are people pretty content with black or white?!


That'd be cool - how much extra would it be?


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Wed Oct 23, 2013 7:55 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Mankey wrote:
jamese wrote:
Another question: I'm revisiting doing the finishing myself (powder coating most likely). Would anyone pay more for custom colours, or are people pretty content with black or white?!


That'd be cool - how much extra would it be?


Not sure yet, but hopefully no more than $20.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Wed Oct 23, 2013 12:49 pm 
Offline

Joined: Tue Apr 20, 2004 4:39 pm
Posts: 172
jamese wrote:
Not sure yet, but hopefully no more than $20.

Cool, not sure why another color other than white or black would cost so much more (not your fault, your powdercoater's I'm sure). My vote would be for bright blood red.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Tue Oct 29, 2013 8:18 am 
Offline

Joined: Tue Jul 31, 2012 12:00 pm
Posts: 12
Location: Ontario, Canada
I've dropped a link to this thread, and to your site, in a thread on HWC.

I really like what you are doing, and figured you wouldn't mind a little extra word of mouth.

_________________
White Box: NZXT H440 White, i7-4790K, NH-D14, MX100 512, GSkill Trident 8x2 2400, Corsair CS750M, Sabertooth Z97 Mk2, Sapphire 7870OC Dual X
Black Box: PS07B, X560, F1A75-M Pro, A8-3870K@3.5, 4x4Gb Ripjaws X 1866, Intel 520 180GB, Asus DRW-24B1ST, Sapphire Ultimate 6670, Mugen 3
Square Box: HP Microserver Gen7 N54L, 2GB, 250GB Seagate HDD, 2x2TB Hitachi HDD


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Tue Oct 29, 2013 12:24 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
darqsyde wrote:
I've dropped a link to this thread, and to your site, in a thread on HWC.

I really like what you are doing, and figured you wouldn't mind a little extra word of mouth.


Thank you! I could use more Canadians customers. :)

Unfortunately, I'm nearly out of stock, and need to look at producing more. I ended up with a 5 blemished cases, mostly for powder coat reasons, so that didn't help.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Oct 31, 2013 9:06 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
...


Last edited by jamese on Sat Jan 25, 2014 7:28 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Jan 24, 2014 10:38 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
I have new revised cases in stock, unfortunately I'm dealing with some manufacturing, and powder coating issues. Quite discouraging.

I also got some transparent acrylic side panels made for the 2013 L1 cases, which turned out nicely I think:

Image

Here's a few initial photos of the 2014 L1. Hopefully I'll be ready sometime in February:

Image

Image

Image


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Sun Jan 26, 2014 9:09 am 
Online
*Lifetime Patron*

Joined: Sun May 21, 2006 9:09 am
Posts: 1906
Location: Northern California.
sorry to hear your having coating issues. are the 2014 cases the same dimensions, -but with bigger bottom grill area? or were there other changes made?

im contemplating getting a second case to house an ATX PSU and maybe a 3.5 hdd.

did you ever consider a modular line? im thinking stack-able units with different back-plates... one for a PSU, one with a 5.25 drive bay where back-pane would be for opti or hot swap HDD (witch only would require a little bracket and trim to work with current back-pane cut out.), maybe a back-pane for cooling tubes, so it could house a radiator/pump assembly.

P.S. has anyone that you know of put a gtx 640 in one of these yet?

_________________
“America, it's a continent, not a country!”


Last edited by xan_user on Mon Jan 27, 2014 8:59 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Sun Jan 26, 2014 5:20 pm 
Offline

Joined: Thu May 25, 2006 1:19 am
Posts: 489
Location: Australia
sorry to hear about the manufacturing problems, really sucks that you're at the mercy of the shop... but what can you do?

that acrylic side panel is crazy nice.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Mon Jan 27, 2014 3:14 am 
Offline

Joined: Fri Nov 15, 2013 8:07 am
Posts: 120
Location: Vienna - Austria
Hi Jamese,
I discovered your topic, few months ago. Great project, great realization!
I like the bigger opening.


A small suggestion for your webpage: maybe you could get some pictures from your customers rigs, and add a Gallery section.

I'm sure your customers already know what they want, when they order through you, but for new comers, it can be usefull to see how it looks, with different configurations, different fans, etc.

The pictures with empty case, doesn't show all the potential of this little box.

_________________
(sold in Dec. 2013) Temjin TJ08-E / Be Quiet Straight Power E9 400W / GA-B75M-D3H / i3-3225 / 8GB / SSD 120GB / HDD 1TB / running Mac OS - Hackintosh


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Mon Jan 27, 2014 10:26 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
@xan_user, Thanks. The 2014 cases are basically the same size, but not exactly the same:

L1 (2013) dimensions: 220x93x222 mm
L1 (2014) dimensions: 220x94x220 mm

I haven't thought about a modular case in the past, but it's not something I'm considering doing. A NAS case... perhaps.

I'm not aware of anyone using a GTX 640, or of any GTX 640's that actually follow the low profile specification (in terms of cooler height). The Sapphire HD 7750 Low Profile seems to be the go to card for this case for those looking to do some gaming.

@porkchop, Thank you, luckily they stand behind their work, but still a challenge and time sink. I did try a new powder coater this time because I wasn't totally happy with the last one. They did an excellent job with the coating, but they failed to keep the parts properly protected from touching each other. Really sad, considering it was so close to being a success!

@thierry., Thank you, glad you like the bigger openings! I appreciate your suggestion. It's a good idea, and I'll try to implement it at some point. Just need to find/make the time to do it! :)


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Mar 07, 2014 3:52 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Some updated photos. These are finally available. :)

Also, for anyone with an original L1 who would like some larger case feet, check out the 3M SJ-5009. These are what I'm including with the new L1.

Image

Image


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Sat Mar 29, 2014 12:52 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
UPDATE MARCH 31, 2014: Planning to produce a batch of 20, and will be priced at $120 CAD. Taking pre-orders. Orders will be charged once the item is ready to ship, and will be processed in the order received.

Within about 1-2 weeks I'm planning to produce a slightly larger version of the L1, dubbed the L2. The main difference between the L1 is that the L2 will have two expansion slots. I've been getting a count of people seriously interested on another forum, but thought I'd post here also. I'm only producing enough for those who want one (and maybe a few extra). If you're interested, please let me know via PM or email:

Interest level:
Serious (I'll pre-order if necessary), or Maybe?

Colour:
Matte Black, Gloss Black, Gloss White, or Unfinished?

I'm still waiting on some pricing, but I expect price to be around $110-145 CAD.

Image

Image

Image


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Apr 24, 2014 4:51 pm 
Online
*Lifetime Patron*

Joined: Sun May 21, 2006 9:09 am
Posts: 1906
Location: Northern California.
New cases look sweet.


Update on the delorean...
I put a full sized passive GPU in mine AND a tower heatsink. It runs fine totally fanless, but I added a scythe slim 120mm @ 500rpm just for insurance.


You do not have the required permissions to view the files attached to this post.

_________________
“America, it's a continent, not a country!”


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Apr 24, 2014 5:41 pm 
Offline

Joined: Thu May 25, 2006 1:19 am
Posts: 489
Location: Australia
@ xan_user

:shock: i love it!


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Apr 25, 2014 7:45 am 
Online
*Lifetime Patron*

Joined: Sun May 21, 2006 9:09 am
Posts: 1906
Location: Northern California.
thx. :D
kinda bummed i drilled the holes in the bottom now.... oh well. Id like to come up with a cleaner e-sata port.

one thing im very happy about is i used hot glue to glued a red (hdd) and a green LED (power), right next to one another, just inside the back cutout for the wifi antenna. it makes a nice soft glow, instead of the usual disotek/rave light show.

Originally I made a shroud out of clear plastic, to channel fan 'exhaust' over the gpu heatsink, but it wasnt needed for my under-powered card. With a shroud or duct (-or if you could have the GPU heat sink on the top of the card), I believe any card, that a pico or similar PSU can handle, could be used.

_________________
“America, it's a continent, not a country!”


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Apr 25, 2014 7:52 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Glad to see you're still having some fun with the case! :) I'm quite impressed with how well you did those round holes in the bottom piece.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Jul 11, 2014 10:27 pm 
Offline

Joined: Mon May 26, 2014 6:16 am
Posts: 66
Location: Great Britain
This looks an amazing case, well done for taking your idea and making it reality! It's possibly slightly too small for me (a phrase I never thought I'd use about a case) as I'd miss having front mounted USB ports (I'd end up with a USB hub next to it, which kinda defeats the point), but still very tempted...

How quiet is the case when set-up with an i5/i7 inside? Does it meet with SPCR forum members' approval, or does 'very quiet-ness' need to be sacrificed for the case being so small?

How much difference to noise & temperature did the vented side-panel make?


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Sat Jul 12, 2014 2:15 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
UK_Peter wrote:
This looks an amazing case, well done for taking your idea and making it reality! It's possibly slightly too small for me (a phrase I never thought I'd use about a case) as I'd miss having front mounted USB ports (I'd end up with a USB hub next to it, which kinda defeats the point), but still very tempted...

How quiet is the case when set-up with an i5/i7 inside? Does it meet with SPCR forum members' approval, or does 'very quiet-ness' need to be sacrificed for the case being so small?

How much difference to noise & temperature did the vented side-panel make?


Hey UK_Peter, thank you!

The L1/L2 (L2 is basically L1 Dual Slot) isn't a so-called "silent case". Meaning, it isn't designed to block noise created by noisy components. I'm personally very sensitive to noise, and I designed the L1 primarily for myself. The L1 is designed to use silent/quiet components. I currently use a Intel i3 3225, Noctua NH-L9i, Noctua NF-R8 redux-1800 PWM, and one SSD. There are people putting i7's, and gaming GPUs into the L1 and L2 (L1 Dual Slot), but they're probably sacrificing some silence.

The vented side panel should drop CPU temps a degree or two.


Last edited by jamese on Wed Sep 03, 2014 8:13 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Wed Sep 03, 2014 7:40 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Well, summer is basically over, and it looks like I'm finally going to take the plunge and start trying out anodizing on my parts. I may even go with a Type III Hard Coat anodized finish, but have to confirm the brown-grey color it produces. Anodizing has a lower minimum fee per color, so I may be able to offer 3-4 color options per batch. :)


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Sep 04, 2014 11:52 am 
Offline

Joined: Tue Apr 20, 2004 4:39 pm
Posts: 172
jamese wrote:
Well, summer is basically over, and it looks like I'm finally going to take the plunge and start trying out anodizing on my parts. I may even go with a Type III Hard Coat anodized finish, but have to confirm the brown-grey color it produces. Anodizing has a lower minimum fee per color, so I may be able to offer 3-4 color options per batch. :)


YES YES YES. This is awesome. Type III is duller, but I've seen some nice dark black colors without issue.

I remember you thinking there would be issues with the standoffs being a different material. Will you be getting these anodized before installing the standoffs?

P.S. Still hoping you'll make a SFX version ;)


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Sep 04, 2014 12:16 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Mankey wrote:
YES YES YES. This is awesome. Type III is duller, but I've seen some nice dark black colors without issue.

I remember you thinking there would be issues with the standoffs being a different material. Will you be getting these anodized before installing the standoffs?

P.S. Still hoping you'll make a SFX version ;)


Yes, that's what I'm hoping to do. That way I can retain the durable steel fasteners instead of switching to aluminum. The risk is that the parts could get scratched or damaged though.

The actual surface finish is still a little up in the air. Bead blasting would be nice, but it's very expensive/time consuming, so I'm looking at other options.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Sep 04, 2014 12:26 pm 
Offline

Joined: Tue Apr 20, 2004 4:39 pm
Posts: 172
jamese wrote:
Yes, that's what I'm hoping to do. That way I can retain the durable steel fasteners instead of switching to aluminum. The risk is that the parts could get scratched or damaged though.

The actual surface finish is still a little up in the air. Bead blasting would be nice, but it's very expensive/time consuming, so I'm looking at other options.


Would it be possible to move to a traditional "screw in" standoff? They have them in all different heights. That way you'd be able to save an operation - simply get the things anodized, then have the end user install the standoffs.

Surface finish for type III may not matter - it is pretty forgiving. Is the aluminum pretty scratch/mark free when its done being folded? If it's in fairly good condition, you could do bright dipping. If it does have tooling marks, your other option other than blasting would be polishing, which is even more expensive.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Sep 04, 2014 1:15 pm 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
Mankey wrote:
Would it be possible to move to a traditional "screw in" standoff? They have them in all different heights. That way you'd be able to save an operation - simply get the things anodized, then have the end user install the standoffs.

Surface finish for type III may not matter - it is pretty forgiving. Is the aluminum pretty scratch/mark free when its done being folded? If it's in fairly good condition, you could do bright dipping. If it does have tooling marks, your other option other than blasting would be polishing, which is even more expensive.


Screw-in standoffs aren't an option, as the threads would protrude into the side panel. They would also require threads. In addition to the standoffs, there are 13 (14 for L2) steel nuts used for threads.

Ya, I'm hoping with the right anodized finish, it'll be durable enough to make it through the standoffs/nuts installation unscathed! I'd like to use aluminum with a protective coating. Otherwise there's a good chance there would be scratches.


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Thu Sep 04, 2014 11:18 pm 
Offline

Joined: Mon May 26, 2014 6:16 am
Posts: 66
Location: Great Britain
jamese wrote:
Screw-in standoffs aren't an option, as the threads would protrude into the side panel. They would also require threads. In addition to the standoffs, there are 13 (14 for L2) steel nuts used for threads.

I'm curious, how do your steel fasteners work as standoffs? The need for screw-in standoffs has done my head in over a couple of tiny case sketches, because those threads have to go somewhere!


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Sep 05, 2014 6:37 am 
Offline

Joined: Tue Sep 18, 2012 12:39 pm
Posts: 108
Location: Canada
UK_Peter wrote:
I'm curious, how do your steel fasteners work as standoffs? The need for screw-in standoffs has done my head in over a couple of tiny case sketches, because those threads have to go somewhere!

I use PEM self-clinching standoffs and nuts, which are pressed into the metal: http://pemnet.com/fastening_products/standoffs.html


Top
 Profile  
 
 Post subject: Re: Lone Industries Mini-ITX prototype
PostPosted: Fri Sep 05, 2014 3:05 pm 
Online
*Lifetime Patron*

Joined: Sun May 21, 2006 9:09 am
Posts: 1906
Location: Northern California.
wrong thread.... :oops:

_________________
“America, it's a continent, not a country!”


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 186 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: xan_user and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group