http://www.ncix.com/detail/antec-one-mi ... 2-1089.htm
Has anyone attempted it? Looks like there would be just enough room. Not the best case for silence but I need a cheap case with 5 3.5 bays and 2 SSD mounts.
Thanks
HDD supension in the Antec One?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: HDD supension in the Antec One?
I didn't understand your question. You need 5.25 bays to suspend 3.5 HDDs , the Antec One has just three, and you may use 3.5 bays to suspend 2.5" HDDs, but you didn't say which HDDs you're going to use: so, what's the point of the Antec One for your needs?
-
- Posts: 8
- Joined: Fri Mar 20, 2015 7:53 pm
Re: HDD supension in the Antec One?
Typically, yes.
I've suspended drives in may places other then 5.25 bays, including 3.5 bays. The bays look just wide enough because of the rails used. Hence, my question.
I've suspended drives in may places other then 5.25 bays, including 3.5 bays. The bays look just wide enough because of the rails used. Hence, my question.
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: HDD supension in the Antec One?
OllieDixon wrote:I've suspended drives in may places other then 5.25 bays, including 3.5 bays. The bays look just wide enough because of the rails used. Hence, my question.
Ah, ok, never tried: IMVHO it could be advisable to modify the thread subject (I'm thinking to something like: "Which are the Antec One 3.5" bays actual measures?"), because what you told me right now isn't that apparent from the title.
-
- Posts: 8
- Joined: Fri Mar 20, 2015 7:53 pm
Re: HDD supension in the Antec One?
Title is fine