Quiet PSU for P4P800 Deluxe

New to PC silencing? Read & post your questions here. Dedicated to rosy_toes.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
cwineman
Posts: 6
Joined: Mon Dec 18, 2006 11:40 am

Quiet PSU for P4P800 Deluxe

Post by cwineman » Mon Dec 18, 2006 11:44 am

I was advisedto post this question at this forum.

I'm turning a PC into a PVR for my parents. It will be housed in a home theater style case that will sit in their entertainment center. I'm concerned about noise. I just bought a CPU heatsink/fan that is supposed to be quiet. I don't think the case fans make much noise. That leaves the PSU.

Can anyone recomend a PSU for this setup that will run real quiet-like? I don't expect to add any components other than what I've listed below. So I'm not worried much about future components sucking up too much juice.

Would a 400W PSU work? Under 400W? I have an fairly quiet 350W PSU sitting around. Using it would require an adapter to power the CPU, but would 350W even be enough?

What do you guys recommend?

-cwineman

Asus P4P800 Deluxe
Pentium -4 2.8CGHz 800M 478P 512K
1GB Corsair DDRAM PC3200
Geforce 7800GS 256MB
2 * HAUPPAUGE WinTV-PVR-150
Western Digital 200GB HD WD2000JB
NEC ND-3550 16x DVD Burner
CNPS7000B-AlCu Heatsink
*(Antec True Power 550W)* - This is what I am currently using, but I would like something more quiet.

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

Post by NeilBlanchard » Mon Dec 18, 2006 7:00 pm

Hello & welcome to SPCR!

I'd say that the 350watt PS will be fine, unless it is a unit with an "optimistic" rating -- what brand is it? What sort of an adapter do you need?

cwineman
Posts: 6
Joined: Mon Dec 18, 2006 11:40 am

Post by cwineman » Mon Dec 18, 2006 8:41 pm

what brand is it? What sort of an adapter do you need?
It's a Sparkle FSP350-60BN 350W. When I bought it, I didn't realize that the P4P800 Deluxe needed a specific ATX power connector, which is why I bought the Antec 550W I have now.

That connector is what I need an adapter for. I don't know what it is normally called, but in the manual it is listed as 4-Pin ATX12V. I will need to convert one of the existing outputs from the Sparkle, into the thing that fits in that square 4-pin ATX12V slot.

I think the Sparkle is supposed to be a decent PSU. So assuming the 350W isn't an optimistic rating, you think it will be enough to support all of the components that I've listed?

jaganath
Posts: 5085
Joined: Tue Sep 20, 2005 6:55 am
Location: UK

Post by jaganath » Tue Dec 19, 2006 2:32 am

That connector is what I need an adapter for. I don't know what it is normally called, but in the manual it is listed as 4-Pin ATX12V. I will need to convert one of the existing outputs from the Sparkle, into the thing that fits in that square 4-pin ATX12V slot.
According to Newegg the FSP350-60BN already has the 4-pin 12V CPU power connector, so no adapter needed, see this picture:

Newegg

cwineman
Posts: 6
Joined: Mon Dec 18, 2006 11:40 am

Post by cwineman » Tue Dec 19, 2006 5:16 am

jaganath,

That picture is for a FSP350-60BN-S model which must be slightly different from the one I have. Mine doesn't have that connector. It has everything in that picture minus the 4-pin ATX connector and the SATA connector.

-cwineman

stromgald
Posts: 887
Joined: Wed Jun 09, 2004 12:45 pm
Location: California, US

Post by stromgald » Tue Dec 19, 2006 9:16 am

350 Watts is plenty for that setup. If you do plan on getting a new one rather than trying the adapter with the Fortron/Sparkle Power, I would suggest either a 330W Seasonic S12 or 380W Seasonic S12. The 380W might be quieter under heavy loads since it has larger heatsinks, but it will be more expensive. Not sure how much more expensive, but you can check Newegg for that.

cwineman
Posts: 6
Joined: Mon Dec 18, 2006 11:40 am

Post by cwineman » Tue Dec 19, 2006 11:08 am

Cool. I'll give it a try then. I've already ordered the adapter.

Post Reply