Page 1 of 1

Fanless Video card for Windows 10?

Posted: Fri May 06, 2016 9:05 am
by JVM
My ECS 9600GT is eight years old and might be causing a problem in Windows 10. Are there any recommendations for a fanless video card for Windows 10?

Re: Fanless Video card for Windows 10?

Posted: Fri May 06, 2016 10:32 am
by CA_Steve
What's your use case? 1 monitor, two or more? Any gaming or other 3D tasks or just web browsing, streaming, etc?

New low end cards have mostly gone away as the integrated gfx on CPUs increase their capabilities.

Re: Fanless Video card for Windows 10?

Posted: Fri May 06, 2016 10:44 am
by CA_Steve
Just as a comparison,

The 9600 GT has a Passmark score of 751 and a TDP of 75W.
Nvidia GT 720 scores at 736, TDP of 19W, supports DX12, and goes for $45-70.
Nvidia GT 730 is 926, 49W TDP, DX 12, and is ~$55+.

Here's some fanless cards at Newegg.

Re: Fanless Video card for Windows 10?

Posted: Sun May 15, 2016 12:29 pm
by Reiep
I currently use an Asus GTX 950 Strix, which runs fanless until +/- 40% load and is pretty quiet even at full load. It also delivers some solid gaming and folding performances, waaaaay above the usual low end fanless gpus.

Re: Fanless Video card for Windows 10?

Posted: Tue May 17, 2016 12:45 am
by edh
JVM wrote:My ECS 9600GT is eight years old and might be causing a problem in Windows 10.
What exactly is the problem it's causing? Might be a driver issue perhaps instead of hardware.

Re: Fanless Video card for Windows 10?

Posted: Fri May 20, 2016 3:00 pm
by grant2
The recent leap to 14nm process by Nvidia + AMD may result in some significantly better fanless cards.

Or maybe I'm just hoping for vaporware!

If you can wait it out, you may want to wait in case something impressive comes out in the next few months.

Re: Fanless Video card for Windows 10?

Posted: Fri May 20, 2016 5:09 pm
by Abula
grant2 wrote:The recent leap to 14nm process by Nvidia + AMD may result in some significantly better fanless cards.
From what i read, if i remember correctly, Nvidia is 16nm and AMD will be 14nm, either way its the same point.

Re: Fanless Video card for Windows 10?

Posted: Fri May 20, 2016 7:54 pm
by quest_for_silence
grant2 wrote:Or maybe I'm just hoping for vaporware!
I'd bet it's vaporware: as seen on Intel last three-four CPU generations, more than once very small process = higher power density = higher temperatures.
GPUs are much bigger chips, so that YMMV, but personally I won't bet on "better" fanless.

Re: Fanless Video card for Windows 10?

Posted: Mon May 30, 2016 4:26 pm
by atmartens
AMD is supposedly aiming for lower power consumption. Maybe it's worth the wait? These generational leaps don't happen often.