Will it fit: xp120 and a passive chipset cooler?

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
ceselb
Posts: 40
Joined: Fri Apr 22, 2005 4:57 pm
Location: Linkoping, Sweden

Will it fit: xp120 and a passive chipset cooler?

Post by ceselb » Thu May 26, 2005 12:39 am

Any socket 939 motherboard that can handle a xp120 cpu cooler and a tall chpset cooler like the zalman ZM-NB47J (blue)?

m0002a
Posts: 2831
Joined: Wed Feb 04, 2004 2:12 am
Location: USA

Post by m0002a » Thu May 26, 2005 12:43 am

Asus A8N-E is one. Here is a pic of the chipset cooler.
http://forums.silentpcreview.com/viewto ... 2&start=65

Ackelind
Posts: 467
Joined: Sun Mar 20, 2005 1:18 pm
Location: Umea, Sweden.

Post by Ackelind » Thu May 26, 2005 5:11 am

Abit AX8 already has a passive chipset cooler, the chip also runs much cooler than the NF4 ones, and it will fit the XP120, though DIMM #1 cannot be used.

ceselb
Posts: 40
Joined: Fri Apr 22, 2005 4:57 pm
Location: Linkoping, Sweden

Post by ceselb » Thu May 26, 2005 7:21 am

Well, it's going to be fully populated (4 * 1Gb), so blocked DIMM slots won't do.

GUNNER
Posts: 66
Joined: Mon Apr 11, 2005 8:16 pm
Location: Memphis, TN
Contact:

Post by GUNNER » Thu May 26, 2005 8:28 am

I'm using an Asus A8N-SLI Deluxe (though the standard should be the same) with a XP-120, NB-47J replacing the stock fan, and all 4 DIMM slots populated.

(BTW, it doesn't look like the XP-120 will miss the first DIMM, but it does. Barely.)

Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Post by Zhentar » Fri May 27, 2005 8:59 pm

I've got a DFI Lanparty NF4 Ultra-D.

I'm using an XP-120, which misses the ram but probably blocks the first PCI-E slot (I'm not sure, since I don't have a card to try in there). I'm using a Zalman 47J on the chipset, which blocks any cards longer than the 16x slot in the 2nd slot. It also doesn't seem to be good enough for passive cooling, though I need to experiment more. I'm using a Zalman ZM-80D HP on my GeForce 6600GT which blocks the 3rd PCI-E slot and the first PCI slot, leaving me with one usable PCI slot.

Post Reply