Do it yourself hard drive noise reduction guide

Silencing hard drives, optical drives and other storage devices

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
AZBrandon
Friend of SPCR
Posts: 867
Joined: Sun Mar 21, 2004 5:47 pm
Location: Phoenix, AZ

Do it yourself hard drive noise reduction guide

Post by AZBrandon » Wed May 26, 2004 9:56 pm

Brian's at it again with his helpful technical guides! This one would undoubtedly benefit very brave SPCR'ers:

http://bbspot.com/News/2004/05/bbspot_l ... drive.html

Also of interest may be his popular guide on hard drive cooling:

http://bbspot.com/News/2004/05/bbspot_l ... drive.html

lenny
Patron of SPCR
Posts: 1642
Joined: Wed May 28, 2003 10:50 am
Location: Somewhere out there

Post by lenny » Wed May 26, 2004 10:32 pm

Brings to mind Rusty's hard drive immersion experiments...

davidstone28
Posts: 556
Joined: Tue Oct 28, 2003 5:14 am
Location: London, UK

Post by davidstone28 » Thu May 27, 2004 4:04 am

Hilarious!

Image

davidstone28
Posts: 556
Joined: Tue Oct 28, 2003 5:14 am
Location: London, UK

Post by davidstone28 » Thu May 27, 2004 4:06 am

Image

HammerSandwich
*Lifetime Patron*
Posts: 1288
Joined: Sat Oct 25, 2003 3:21 pm
Location: 15143, USA
Contact:

Post by HammerSandwich » Thu May 27, 2004 3:33 pm

Maxamus wrote:Water aint coming near my new HDD's ever!!!!!
According to your sig, it already is.

greeef
Posts: 355
Joined: Thu Apr 15, 2004 8:08 am

Post by greeef » Fri May 28, 2004 7:26 am

Maxamus wrote:Although i have been looking into watercooling my hdd's lately
actually, i saw a really good guide on ice-cooling hard drives. Must be better than water.

griff

eos42
Posts: 5
Joined: Thu May 27, 2004 9:17 pm

Post by eos42 » Fri May 28, 2004 8:32 am

I'm not an engineer or a physicist, but I thought water was a great transmitter of sound, definately faster than air, mabye sound is lost in the transition from water to air though

1398342003
Posts: 324
Joined: Wed May 07, 2003 10:35 pm
Location: Surrey, B,C

Post by 1398342003 » Fri May 28, 2004 11:40 am

The reason that water dampens sound so well is that it is dense and heavy. Sound is made by vibration, and dense/heavy objects take more energy to vibrate at a given noise level. In theory, a 1"-3" brass or lead shell that completely enclosed the drive would lower the volume and pitch of the vibrations to the point of inaudibility. (silence)

eos42
Posts: 5
Joined: Thu May 27, 2004 9:17 pm

Post by eos42 » Fri May 28, 2004 12:08 pm

you guys are probably right, but solids do transmit sound better than gases, and I think liquids are in the middle somewhere. I have no idea what goes on at the transition between two mediums though.

1398342003
Posts: 324
Joined: Wed May 07, 2003 10:35 pm
Location: Surrey, B,C

Post by 1398342003 » Fri May 28, 2004 12:27 pm

From my understanding they transmit the sound better, but it takes more energy to put the sound into them.

icancam
Posts: 173
Joined: Fri Oct 10, 2003 12:24 pm
Location: Scottsdale, AZ, USA

Post by icancam » Fri May 28, 2004 12:27 pm

You could use sand instead of water. This is a technique that has been used for years to dampen sound and vibration by audiophiles. Apparently, the individual grains of sand rub against each other and in the process dissipate the energy via friction.

1398342003
Posts: 324
Joined: Wed May 07, 2003 10:35 pm
Location: Surrey, B,C

Post by 1398342003 » Fri May 28, 2004 12:37 pm

Water would work, prolly very well. You would need at least 1" of water on every side of the drive.

Note that there would be the risk of a leak killing your drive.

If you're putting something in front of the drives only, I would recommend useing a heavy block of lead/brass/copper/gold or a VERY well sealed water container, and attach a 1/2" thick piece of foam to the drive side to dampen sound reflection. Without the foam the sound may bounce off of the block and back into the case. I would also recommend doing this to the sides of the drive.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri May 28, 2004 8:38 pm

Water does dampen, no question, compared to solids -- if you and the source of the sound are on either side of the water, not in the water.

Alternate concept for HDD water sound dampening:
  • Make a 5 sided box a bit bigger than the HDD -- maybe 1" all around the circumference.
  • Fill two very strong rubber bags with water. Think of something like small hotwater bottles. Place one on the bottom of the 5 sided box.
  • Put the HDD on top of this. Put the 2nd rubber bag of water on top of the HDD.
Now the HDD is effectively floating in water, and the vibrations and noise have to go through the water bags to get out.

Someone here in the forums did something similar with sand. :lol:

Post Reply