I have built a few systems using this combination and I have noticed the thumb screws for the Noctua NH-L9i are hitting the base plate of the M350 and I'm wondering if this is normal.
If you have a M350 enclosure with a Nocuta NH-L9i CPU cooler, can you tell if the thumb screws are hitting the base plate on your build?
Anyone with a M350 enclosure and Noctua NH-L9i CPU cooler?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
Nice Marmot
- Posts: 75
- Joined: Mon May 05, 2003 1:02 pm
Re: Anyone with a M350 enclosure and Noctua NH-L9i CPU coole
Just put a Asrock H270M-ITX/ac with a Noctua NH-L9i into an M350, and it does seem like the thumb screws are just touching the base. Tried sweeping a bent staple under the screw and couldn't get it to pass. Hopefully not causing a problem, it seemed like the motherboard was sitting flush on the mount points.