Info & chat about quiet prebuilt, small form factor and barebones systems, people's experiences with vendors thereof, etc.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Mon Jun 10, 2013 4:18 pm
Okay, Apple is going to a quite radical new Mac Pro:
http://www.apple.com/mac-pro/
Totally integrated cooling core with a single fan for the entire system. Scroll through the animation - they are packing a lot into the cylinder, and the cooling is the starting point of the design.
![Image](http://images.macrumors.com/article-new/2013/06/2013_mac_pro.jpg)
-
CA_Steve
- Moderator
- Posts: 7651
- Joined: Thu Oct 06, 2005 4:36 am
- Location: St. Louis, MO
Post
by CA_Steve » Mon Jun 10, 2013 7:17 pm
That thing is tiny. It's the Dyson vacuum cleaner of computing
![Smile :)](./images/smilies/icon_smile.gif)
-
picture_perfect
- Posts: 54
- Joined: Tue Feb 21, 2006 10:28 am
- Location: austin,tx
Post
by picture_perfect » Mon Jun 10, 2013 8:17 pm
The single top fan is a neat idea but is it practical for such a high end setup considering there are no dedicated heat sinks/fans...Any heat pipes in that center cavity? Where is the PSU anyway? Did Intel design the form factor? What kind of limb is Apple going out on this time? Will all desktops look like this until all-in-ones take over. Questions to ponder..
-
CA_Steve
- Moderator
- Posts: 7651
- Joined: Thu Oct 06, 2005 4:36 am
- Location: St. Louis, MO
Post
by CA_Steve » Mon Jun 10, 2013 9:40 pm
picture_perfect wrote:The single top fan is a neat idea but is it practical for such a high end setup considering there are no dedicated heat sinks/fans...Any heat pipes in that center cavity?
The primary structure is a big honking aluminum heatsink in the shape of a vertical triangular tube. The mobo connects to one side, the GPU to the next, etc. I'm guessing there are heatpipe style interfaces between the CPU and the heatsink, etc. Air comes in the bottom, goes up the tube and out the top.
-
Cistron
- Posts: 618
- Joined: Fri Mar 14, 2008 5:18 am
- Location: London, UK
Post
by Cistron » Tue Jun 11, 2013 1:19 am
While it's a neat looking thing, it does take away the whole expandability advantage of a desktop.
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Tue Jun 11, 2013 4:46 am
Direct contact between the heatsink and the face of the chips is even better than heat pipes. The heatsink extrusion has very low air resistance, and it is exactly the right format for natural thermal chimney.
My guess is that the the power supply is at the bottom. I think the hard drive is parallel with the flash drive which is just outside the pin side of the CPU.
I agree that the lack of expandability is the first obvious issue; but as I went through the list of features, I wonder what you *could* expand? It will have up to 12 cores (on a single chip?) and it has dual GPU's and the motherboard bus and the memory channels and the I/O ports and the wireless, with much higher bandwidth than almost anything available today.
Having said that I wish it had an optical drive (at the very bottom?) - maybe there will be an optical drive in the keyboard? That would also be usable with the new iMacs...
-
Cistron
- Posts: 618
- Joined: Fri Mar 14, 2008 5:18 am
- Location: London, UK
Post
by Cistron » Tue Jun 11, 2013 5:12 am
NeilBlanchard wrote:I agree that the lack of expandability is the first obvious issue; but as I went through the list of features, I wonder what you *could* expand? It will have up to 12 cores (on a single chip?) and it has dual GPU's and the motherboard bus and the memory channels and the I/O ports and the wireless, with much higher bandwidth than almost anything available today.
I suppose you are right. Here's hoping that thunderbolt finally takes to the market and the interfaces do not become antiquated soon.
One other issue is serviceability, but Apple isn't particularly known for that. *wink*
-
picture_perfect
- Posts: 54
- Joined: Tue Feb 21, 2006 10:28 am
- Location: austin,tx
Post
by picture_perfect » Tue Jun 11, 2013 5:50 am
Does it require special graphics card ect. to interface with the vertical heat sink. If so, probably no off-the-shelf upgrades.
You can use thunderbolt ports for "external" expandability though. Though dual gfx cards are enough for me, you can add more with modular graphics card cases like this. I think it will take multiple thunderbolt connections.
What do you think of "modular expandability"?
http://www.bit-tech.net/news/hardware/2 ... case-deb/1
-
dan
- Posts: 1243
- Joined: Sun Jan 25, 2004 2:01 am
-
Contact:
Post
by dan » Tue Jun 11, 2013 1:27 pm
NeilBlanchard wrote:Direct contact between the heatsink and the face of the chips is even better than heat pipes. The heatsink extrusion has very low air resistance, and it is exactly the right format for natural thermal chimney.
My guess is that the the power supply is at the bottom. I think the hard drive is parallel with the flash drive which is just outside the pin side of the CPU.
I agree that the lack of expandability is the first obvious issue; but as I went through the list of features, I wonder what you *could* expand? It will have up to 12 cores (on a single chip?) and it has dual GPU's and the motherboard bus and the memory channels and the I/O ports and the wireless, with much higher bandwidth than almost anything available today.
Having said that I wish it had an optical drive (at the very bottom?) - maybe there will be an optical drive in the keyboard? That would also be usable with the new iMacs...
i thought direct contact heatpipes were the "best"
what is the best haswell heatpipe cooler in 2013?
-
CA_Steve
- Moderator
- Posts: 7651
- Joined: Thu Oct 06, 2005 4:36 am
- Location: St. Louis, MO
Post
by CA_Steve » Tue Jun 11, 2013 3:48 pm
no heatpipes at all is better than heatpipes.
-
Cistron
- Posts: 618
- Joined: Fri Mar 14, 2008 5:18 am
- Location: London, UK
Post
by Cistron » Tue Jun 11, 2013 11:39 pm
CA_Steve wrote:no heatpipes at all is better than heatpipes.
My thermodynamics lessons date back a while, but the phase change of water does take away a huge amount of energy. Do you think a chunk of Cu/Al is better due to faster heat conductivity?
-
rotor
- Posts: 39
- Joined: Fri Aug 27, 2010 2:52 am
- Location: Londinium
Post
by rotor » Wed Jun 12, 2013 1:32 am
The liquid changes phase TWICE inside the heatpipe. During one of those changes it absorbs heat (when it's near the heat source), and during the other change it emits heat (when it's near the heat sink). The heatpipe is merely a transport mechanism. The heat has to go somewhere, which in every case is the air that surrounds us, and the heat sink/water-cooled radiator is the device that achieves that result.
Energy is neither created nor destroyed, only transformed.
-
Cistron
- Posts: 618
- Joined: Fri Mar 14, 2008 5:18 am
- Location: London, UK
Post
by Cistron » Wed Jun 12, 2013 2:25 am
rotor wrote:The liquid changes phase TWICE inside the heatpipe. During one of those changes it absorbs heat (when it's near the heat source), and during the other change it emits heat (when it's near the heat sink). The heatpipe is merely a transport mechanism. The heat has to go somewhere, which in every case is the air that surrounds us, and the heat sink/water-cooled radiator is the device that achieves that result.
Energy is neither created nor destroyed, only transformed.
Why thank you Dr Rotor for enlightening me on the first axiom, but that doesn't really address the issue in question. We're probably wandering way off topic as well.
-
rotor
- Posts: 39
- Joined: Fri Aug 27, 2010 2:52 am
- Location: Londinium
Post
by rotor » Wed Jun 12, 2013 2:39 am
Cistron wrote:Why thank you Dr Rotor for enlightening me on the first axiom, but that doesn't really address the issue in question. We're probably wandering way off topic as well.
Why yes it does. Your question suggested that you think that the phase change in the heat pipe somehow magically got rid of the heat. It doesn't. =)
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Wed Jun 12, 2013 4:17 am
The interface between materials is the "weak link" in any heatsink system - the Mac Pro has just one thermal connection. Heatpipes are good at moving heat from a small area to a large one, but there are FIVE points of transfer in any heatpipe system. (Chip to contact plate, plate to heatpipe, inside heatpipe to liquid, gas to inside of other end of heatpipe, then heatpipe to fins.) And the Mac Pro has the ability to directly connect a large area to the CPU and GPU's; so heatpipes are not needed, and they in fact would hinder things.
I'm hoping the price on the Mac Pro is not astronomical - hopefully since it is compact and uses a fraction (1/8th?) of the materials of the current generation, this will translate to a lower cost, too.
-
xan_user
- *Lifetime Patron*
- Posts: 2269
- Joined: Sun May 21, 2006 9:09 am
- Location: Northern California.
Post
by xan_user » Wed Jun 12, 2013 5:37 am
NeilBlanchard wrote:
I'm hoping the price on the Mac Pro is not astronomical
ive yet to see any apple device that was not absurdly priced...even their simple charging dongles are outrageous. i would be truly shocked if this thing is any different.
-
CA_Steve
- Moderator
- Posts: 7651
- Joined: Thu Oct 06, 2005 4:36 am
- Location: St. Louis, MO
Post
by CA_Steve » Wed Jun 12, 2013 7:10 am
I think any cost savings on the case design will be minimal compared to the cost of the electronics therein. That said, there's potential for lower mfg cost on the GPU side as Apple is just buying the chips from AMD and not boards. I don't know how big the Apple Tax will be.
-
tim851
- Posts: 543
- Joined: Wed Aug 13, 2008 11:45 am
- Location: 128.0.0.1
Post
by tim851 » Mon Jul 01, 2013 3:08 am
I can't imagine this being a quiet machine.
No matter what type of heatsink they use, at the end, you have two FirePros and one 12-core Xeon dumping their heat in the case. Apple will probably mitigate some of this by using low power chips.
Nonetheless, when stressed, I'd reckon more than 100 watts of heat energy need to be evacuated.
With one fan.
The reason multiple big fans are the silent choice is that they move the same amount of air at lower air speeds. And wind noise is the primary source of noise of a good fan. So this one Mac Pro fan will have to move air quite quickly, resulting in the tyical whoosh-noise.
But the real problem: this Mac Pro is designed to be ON YOUR DESK. So the noise will occur 2-3 feet away from you, directed upwards.
Apart from that: Apple designed a machine that, while a technological marvel, is not really what their pro users wanted from them. No expendability, no internal drive bays. If it works out, kudos, but this seems to be the second coming of the Cube, one of the bigger flops in corporate history.
-
faugusztin
- Posts: 450
- Joined: Mon Mar 29, 2010 2:47 am
- Location: Bratislava, Slovak Republic
Post
by faugusztin » Mon Jul 01, 2013 3:30 am
NeilBlanchard wrote:I'm hoping the price on the Mac Pro is not astronomical - hopefully since it is compact and uses a fraction (1/8th?) of the materials of the current generation, this will translate to a lower cost, too.
Expect $2500 or more. Of course for a quadcore with single lowend FirePro.
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Mon Jul 01, 2013 4:37 am
That would be as low as I'd expect, though under $2K would be even better. I thought that it said that the Mac Pro will always come with two GPU's.
-
edh
- Posts: 1621
- Joined: Mon Mar 17, 2008 1:49 pm
- Location: UK
Post
by edh » Mon Jul 01, 2013 4:56 am
NeilBlanchard wrote:I thought that it said that the Mac Pro will always come with two GPU's.
It's shown with only a single HDMI port which makes me think this is not that graphically powerful. Even if you could have a powerful graphics chip or 2 and still only offer a single output, it wouldn't make sense to do so. Makes me think that graphically this is not that strong.
-
faugusztin
- Posts: 450
- Joined: Mon Mar 29, 2010 2:47 am
- Location: Bratislava, Slovak Republic
Post
by faugusztin » Mon Jul 01, 2013 5:01 am
edh wrote:It's shown with only a single HDMI port which makes me think this is not that graphically powerful. Even if you could have a powerful graphics chip or 2 and still only offer a single output, it wouldn't make sense to do so. Makes me think that graphically this is not that strong.
It got 6 Thunderbolt ports - and part of Thunderbolt spec is... Mini DisplayPort. So it got plenty of outputs.
-
MikeC
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
-
Contact:
Post
by MikeC » Mon Jul 01, 2013 6:36 am
It is an impressive bit of integrated mechanical-thermal design. At full load, I'm sure it has to whoosh, but perhaps that blower is designed for a smooth broadband sound. A smooth, non-tonal 25 dBA@1m isn't objectionable, imo. As long as the fan controller has enough hysteresis to keep it from yoyoing up and down.
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Tue Jul 02, 2013 4:45 am
They mention that they will be offloading as much of the calculations to the GPU's. This makes sense for some things (similar to Folding@Home) - and I think I read that OSX will be programmed to use the CPU (up to 12 cores!) or the GPU's; whichever is most appropriate.
The Mac Pro will support 3 high resolution monitors, according to the information in the release.
-
eugenius
- Posts: 26
- Joined: Thu Sep 21, 2006 3:34 pm
Post
by eugenius » Fri Aug 30, 2013 12:05 am
Let me see:
- hipster minimalism - check
- plastic - check
- glossy - check
- no dual CPU sockets - check
- priced as high as a real workstation or higher - check
- no 10gbit ethernet and no way to add it - check
- no way to add other pci-e expansion cards (audio, video, app-specific) - check
- no way to upgrade the video cards and cpu - check
- 4 usb ports (really?) - check
- trashcan design - check
- desk cable soup - check
- Intel doesn't support external video cards over thunderbolt - check
- no internal storage except expensive proprietary SSD's - check
Have I missed anything?
-
Ralf Hutter
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Post
by Ralf Hutter » Fri Aug 30, 2013 5:33 am
eugenius wrote:Let me see:
............
Have I missed anything?
Nope! Looks like Apple nailed it! Another billion dollar success headed to market.....
-
xan_user
- *Lifetime Patron*
- Posts: 2269
- Joined: Sun May 21, 2006 9:09 am
- Location: Northern California.
Post
by xan_user » Fri Aug 30, 2013 6:03 am
eugenius wrote:
Have I missed anything?
all it needs now is metro.
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
-
dan
- Posts: 1243
- Joined: Sun Jan 25, 2004 2:01 am
-
Contact:
Post
by dan » Fri Aug 30, 2013 9:48 am
NeilBlanchard wrote:The interface between materials is the "weak link" in any heatsink system - the Mac Pro has just one thermal connection. Heatpipes are good at moving heat from a small area to a large one, but there are FIVE points of transfer in any heatpipe system. (Chip to contact plate, plate to heatpipe, inside heatpipe to liquid, gas to inside of other end of heatpipe, then heatpipe to fins.) And the Mac Pro has the ability to directly connect a large area to the CPU and GPU's; so heatpipes are not needed, and they in fact would hinder things.
I'm hoping the price on the Mac Pro is not astronomical - hopefully since it is compact and uses a fraction (1/8th?) of the materials of the current generation, this will translate to a lower cost, too.
they used to make heatsinks out of a single piece of al.
why did the aftermarket abandon this?
-
CA_Steve
- Moderator
- Posts: 7651
- Joined: Thu Oct 06, 2005 4:36 am
- Location: St. Louis, MO
Post
by CA_Steve » Tue Oct 22, 2013 2:08 pm
Apple claims 12dBa at idle.
Anandtech liveblog...a little less than halfway down.
We'll have to wait until December to find out how loud it is at load.
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Tue Oct 22, 2013 3:14 pm
I think the main material used in this computer is aluminum?
Sure, it's got a single CPU, but it has up to 12 cores, and up to 64GB of system RAM. It has dual internal GPU's with up to 12GB video RAM total, and supports up to 3 high resolution screens, so who needs an external video card?
I agree that it is not perfect, the cable salad is one point, and the lack of a optical drive is another. But the focus on simple and effective cooling is commendable. They are claiming 12dBA at idle and the graph looks like under 20dBA (18-19?) under load.