It is currently Tue Aug 20, 2019 9:25 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: The state of fans in 2019?
PostPosted: Mon Mar 04, 2019 9:41 am 
Offline
*Lifetime Patron*

Joined: Fri Sep 26, 2003 6:28 pm
Posts: 458
Location: CT, USA
I'm in the middle of a new build and am looking for 120mm fan recommendations. A lot has changed since the recommended list was last updated. I know SPCR isn't quite what it used to be, but surely we can get a sticky here with a summary of currently available fans and users' reviews/recommendations? I (and many others, I assume) don't want to wade through dozens of posts here trying to figure out what the current top performers are...

_________________
main: Ryzen 5 2400g + NH-U12S, Asrock B450 itx, Inwin A1 + Cosair SF450 Platinum, 16B Patriot Viper, WD Blue m.2 500G & 3TB WD Red
RIP: Athlon II 240e + Dark Knight, MSI 785GM-E65, Dell RM112, 4GB G-Skill, HVR-2250, 256GB Samsung 830 & 3TB WD Red, CM Elite 341
laptop: Dell XPS13 9343 FHD i5, 128GB SSD, blissfully silent almost all the time


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Mon Mar 04, 2019 2:28 pm 
Offline

Joined: Fri Aug 05, 2005 3:29 am
Posts: 1678
Location: UK
The stand out 120mm fan, noise wise, is the Noctua NF-A12x25 PWM, provided you have a motherboard BIOS and/or fan software that can get it down it the lowest PWM duty cycle settings.


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Mon Mar 04, 2019 2:29 pm 
Offline
Moderator

Joined: Thu Oct 06, 2005 4:36 am
Posts: 7319
Location: Monterey Bay, CA
Here's the best $30 fan in terms of pushing big air at lower noise levels Noctua A12x25 PWM

_________________
1080p Gaming build: i5-4670K, Mugen 4, Asrock Z97 Anniversary, MSI GTX 760 2GB Gaming, 8GB 1866 RAM, Samsung 860 Evo 500GB, Crucial MX100 256GB, WD Red 2TB, Samsung DVD burner, Fractal Define R4, Antec True Quiet 140 (2 front + rear) case fans, Seasonic SSR-550FX. 35W idle, 45-55W video streaming, 170-200W WoW, 318W stress test (Prime95 + Furmark)

Support SPCR through these links: Amazon and Newegg


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Tue Mar 05, 2019 6:03 am 
Offline
*Lifetime Patron*

Joined: Fri Sep 26, 2003 6:28 pm
Posts: 458
Location: CT, USA
Thanks guys, do you recommend that A12x25 for use as intake/exhaust fans too? I see it's excellent on heatsinks / rads (higher pressure scenarios), but some say the S12x25 might be better as a case fan (good for more airflow at lower pressures). I believe my motherboard has decent PWM control, so I might end up with one of each to test things out...

_________________
main: Ryzen 5 2400g + NH-U12S, Asrock B450 itx, Inwin A1 + Cosair SF450 Platinum, 16B Patriot Viper, WD Blue m.2 500G & 3TB WD Red
RIP: Athlon II 240e + Dark Knight, MSI 785GM-E65, Dell RM112, 4GB G-Skill, HVR-2250, 256GB Samsung 830 & 3TB WD Red, CM Elite 341
laptop: Dell XPS13 9343 FHD i5, 128GB SSD, blissfully silent almost all the time


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Tue Mar 05, 2019 6:17 am 
Offline

Joined: Fri Mar 01, 2019 1:47 pm
Posts: 11
Notcua makes great fans they are quite and well designed. Currently using all Notcua fans in my system no issues so far


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Tue Mar 05, 2019 6:47 am 
Offline

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 3519
Location: Guatemala
flyingsherpa wrote:
Thanks guys, do you recommend that A12x25 for use as intake/exhaust fans too? I see it's excellent on heatsinks / rads (higher pressure scenarios), but some say the S12x25 might be better as a case fan (good for more airflow at lower pressures). I believe my motherboard has decent PWM control, so I might end up with one of each to test things out...
The Noctua NF-S12A PWM is a great fan, but really struggles with any restriction like fan filters, so i would still go with NF-A12x25, remember the PWM versions, i dont recommend the 3pin as the starting point is too high.

Since you are buying one of each, looking forward to your comments and experience.


You do not have the required permissions to view the files attached to this post.

_________________
GameMi - Intel i9 9900K + Gigabyte Z390 AM + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Tue Mar 05, 2019 9:14 am 
Offline
*Lifetime Patron*

Joined: Fri Sep 26, 2003 6:28 pm
Posts: 458
Location: CT, USA
Woah, cool charts, Abula... what tool/software is that?

I'm still deciding on getting both or just going with an A12. Last night I realized I have the thinner A12x15 on my heatsink, and it is indeed a great fan.

_________________
main: Ryzen 5 2400g + NH-U12S, Asrock B450 itx, Inwin A1 + Cosair SF450 Platinum, 16B Patriot Viper, WD Blue m.2 500G & 3TB WD Red
RIP: Athlon II 240e + Dark Knight, MSI 785GM-E65, Dell RM112, 4GB G-Skill, HVR-2250, 256GB Samsung 830 & 3TB WD Red, CM Elite 341
laptop: Dell XPS13 9343 FHD i5, 128GB SSD, blissfully silent almost all the time


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Tue Mar 05, 2019 10:57 am 
Offline

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 3519
Location: Guatemala
flyingsherpa wrote:
Woah, cool charts, Abula... what tool/software is that?
Asus FanXpert 2 and 3, only thing that i use Asus motherboards these days.

flyingsherpa wrote:
I'm still deciding on getting both or just going with an A12.
I would go A12 all the way, specially if your fan placement are behind filters or heatsinks, that said, for the back case fan i don't see an issue for the S12A, and its cheaper but also don't have the range of operation that the A12 has. Remember the FLX version is not good on the A12x25, starts at 900rpms, while the PWM can drop close to 300rpms, and very good tonally to 800rpms, even above its above 1000rpms its still acceptable (although this is very subjective to each).

flyingsherpa wrote:
Last night I realized I have the thinner A12x15 on my heatsink, and it is indeed a great fan.
Its a nice fan for what it is, specially on the NH-L12S perform really well cooling an [email protected], but A12x25 performs better.

_________________
GameMi - Intel i9 9900K + Gigabyte Z390 AM + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris


Top
 Profile  
 
 Post subject: Re: The state of fans in 2019?
PostPosted: Mon Jul 22, 2019 8:32 am 
Offline
*Lifetime Patron*

Joined: Fri Sep 26, 2003 6:28 pm
Posts: 458
Location: CT, USA
Just a late update. I ended up buying a PWM A12x25 for my bottom intake (InWin A1, which has a dust filter), and an S12 as the rear exhaust (no filter). It's working well. I then decided I wasn't happy with the NH-L12s and switched to a NH-U12s, which has much better performance, but its fan (F12, I believe) seemed to always have to spin too high. So I swapped it out for another A12x25 and it made a huge difference. Now that fan noise is sorted I can just barely hear my hard drive (sucks, but the case has side vents and I keep it on my desk, kinda miss my old solid-side-panel floor-resting mATX case, but the InWin looks really good on my desk so oh well).

So I ended up spending way more on a heatsink... a U12s plus an extra fan... could have got a D15s for that (but would be hard to fit in my mini-itx case), not to mention having an extra L12s (guess I could sell it). But I'm happy and not overly concerned with cost. This has been my first foray into PWM fans and active control, as my previous system was built 9-ish years ago when PWM wasn't as popular. And that system was low-powered enough that I just used a bunch of zalman fanmates and set them at fixed (and silent) speeds. Tweaking fan curves is a little annoying but worth it and seems to work well... we just had a heatwave (no a/c in that room) and everything seemed to ramp up appropriately and keep things in check.

_________________
main: Ryzen 5 2400g + NH-U12S, Asrock B450 itx, Inwin A1 + Cosair SF450 Platinum, 16B Patriot Viper, WD Blue m.2 500G & 3TB WD Red
RIP: Athlon II 240e + Dark Knight, MSI 785GM-E65, Dell RM112, 4GB G-Skill, HVR-2250, 256GB Samsung 830 & 3TB WD Red, CM Elite 341
laptop: Dell XPS13 9343 FHD i5, 128GB SSD, blissfully silent almost all the time


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group