nope

it works great though

-nathan

im curious, this fan is similar to a normal fan so wouldnt the air just be being sucked up then hitting the plastic part and mostly rebounded back out the fan? Most exhaust fans are like this http://www.vcomshop.com/products/m649/p1991649/large.jpg where the actual fan is like a water wheel.. so the...

i dont know i can tell u how the Nt01 compares with a stock p4 heatsink/cooler the silverstone is pretty good, but if i were to decide again i think i wouldev went with the thermalright the one thing i like about the silverstone is that i have a 92mm fan at the back of my case sucking the air out, i...

the thermalright xp120 would be much better than this one
the extra fins inbetween the heat pipes will help cool very much

if you were thinking of getting this heatsink, i would suggest you rather go with the silverstone nt01

-nathan

very nice sound dampening job there one thing u might want to do is put a 120/92mm fan in the front with an air filter infront of that otherwise its gonna get dusty =| and make/find something to mount your hdd at the front instead of where its sitting now, it should help cool it. the two fans at tbe...

wow that is one very nice case!!

-nathan

looks like it should work

why not just get the thermalright with a 120mm nexus

same thing, cept probably lighter


-nathan

i remember before i bought mine
the V2.0 is much more expensive for the same thing

i think its a tad lighter in grams as well

today i hooked up a ~50cfm 33dba antec 92mm fan
dropped the cpu temps to 36, mb 30
with case with insulation
pretty cool


-nathan

i took a lot more pictures if anyone wants to see them lemme know overall, the cpu cooler isnt all that great. For 70 bucks canadian, i think the thermalright might have been better. One thing good about this is, there is never any hot dead air in the middle of my computer. Also my psu doesnt really...

thanks Bluefront! First off, i must say your install looks at least 1000000000000 better than mine :) good job I even updated my bios because i thought my temps were wrong. but oh well, now my comp feels like it boots faster. I figured 50+ was way too much for my little non HT 2.4 p4 I took a look a...

Hello, I finally went out and bought the silverstone nt01 because it looked really functional. I currently have a P4 2.4A with the asus p4p800SE I read reviews on this cooler, and temperature numbers were around 45-37 at idle Im using the white thermal paste that came with the silvertone nt01 Right ...

wow good job

what kinda temperatures do u get from ur rig?

-nathan

are these fan controllers reliable? I read a review i searched up on google on the Vantech Nexus 201 The Nexus NXP-201 failed about 3 months after operation. For a while only one potentiometer failed. After that I had to turn the fourth potentiometer to operated the first fan. A few days later the w...

heres mine

i think it works too!



nathan

okay, 2v1, so im probably wrong

ive never tried it before, but just theoretically in my opinion it wouldnt be the best cooler.

-nathan

im deciding between the two at the moment as well I dont like the zalman design the centre part of the HSF has the core part of the fan, therefore that area is getting no air. The centre of the Heatsink should be the hottest, so shouldnt the centre part be cooled the most? The cooler master areo is ...

Thanks Qwertyiopisme!!

u rule

-nathan

I need a little bit of help this is what i did i put the RED line from the 80mm FAN to the middle prong and the RED from the psu to the side prong i started my computer up with just the CPU fan, my 80mm fan, and the motherboard connected. I pushed the power button and the fans spun for about half a ...

ohh awsome thanks!

refering to the picture
do i go

A to left prong or right

B to middle/centre prong

does that work?

okay thanks for the help everyone last question, if im going to use my potentiometer on my PSU http://www.channathan.com/help/thermistor_pot_swap.jpg which wire do i connect where? im trying to get as much info as i need cuz i only have one computer so once its off im cut off from references. thanks...

Hi, after reading this review http://www.silentpcreview.com/article9-page2.html I wanted to do the same mod, went to a local electronics shop and foudn this http://www.rpelectronics.com/Data/PT10H2.JPG did i get the right thing? i know it doesnt have a knob, but i guess i could jam something in ther...