Ya, nice cabling, just like mine (Check it out in general gallery)
The p182 is great for cabling, my back panel is bulging (literally) with cables.
Search found 80 matches
- Sat Sep 08, 2007 5:32 pm
- Forum: General Gallery
- Topic: Konnetikut's Quad Core P182 [Update III] pg 3 (16 NEW PICS)
- Replies: 86
- Views: 90265
- Sun Sep 02, 2007 10:07 am
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
Ok, ya, I had some Ninja problems. First, when I first mounted it, the top left push pin wasnt in all the way and the plastic part of the thing that holds it in... was above the MOBO, and its suppose to be below it....I had to remount it and I thought it was ok, but I was getting load temps around 5...
- Sun Sep 02, 2007 10:00 am
- Forum: CPU Cooling
- Topic: Semi-poll of Core 2 Duo Ninja users
- Replies: 46
- Views: 41627
- Sat Sep 01, 2007 3:06 pm
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
- Sat Sep 01, 2007 9:26 am
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
- Tue Aug 28, 2007 1:41 pm
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
I just checked and the manual doesn't say anything about it, I bet it would be fine. But why get a aftermarket heatsink, the stock 8800gts is really really silent idle and you can only hear a whisper when its at load, and it exhausts the hot air, cooling down your whole computer. The North and South...
- Mon Aug 27, 2007 7:16 am
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
For the vent/shroud I took old slot covers from a previous comp and bent them into shape. Then I cut one in half with hedge clippers and put them for the sides. The I covered the inside in electrical tape and the rest in duct tape. The air just floats out, its great because when I play games, the ai...
- Sun Aug 26, 2007 7:43 pm
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
I'll check the ninja tommorow, its to late now, my whole family is asleep. Ya, those were my moms recording headphones until I took them. They are really good. The dust isn't to bad at all. I have a cat and out family never dusts. About once a month I use a air duster and spray it out, its not to bad.
- Sun Aug 26, 2007 1:51 pm
- Forum: General Gallery
- Topic: P182b Build (E6600, 8800gts,Ninja) Large Pics
- Replies: 11
- Views: 10475
P182b Build (E6600, 8800gts,Ninja) Large Pics
Specs: MSI P6N SLI Platinum LGA 775 NVIDIA650i SLI ATX Motherboard Intel Core 2 Duo E6600 Conroe 2.4GHz Western Digital Caviar SE16 400GB 7200 RPM SATA Hard Drive EVGA 8800GTS 320MB CORSAIR 520HX CORSAIR XMS2(2 x 1GB) DDR2 800 AuzenTech XMYSTIQUE 7.1 PCI Sound Card CHIMEI CMV 221D-NBC Black 22" 5ms...
- Thu Aug 23, 2007 11:04 am
- Forum: Cases and Damping
- Topic: Anyone find different results than SPCR for best p180 config
- Replies: 28
- Views: 12872
- Thu Aug 16, 2007 8:24 am
- Forum: Cases and Damping
- Topic: New Antec P180 Airflow Diagram. 3 Chambers. 8800GTS w/ HR-03
- Replies: 10
- Views: 7244
I did that, put cardboard over it and it dropped my CPU temps by a few degrees, very good for a free mod. That fan thing is called an iCage, made by Thermaltake, its sold on Newegg. The fan is very bright and loud though. I would get the Scythe Kama Bay, it looks cleaner in a p180 and is a lot quiet...
- Thu Aug 16, 2007 8:22 am
- Forum: Video Cards & Monitors
- Topic: 8800 GTS Noise Level?
- Replies: 131
- Views: 132514
- Thu Aug 16, 2007 8:11 am
- Forum: Video Cards & Monitors
- Topic: 8800GTS idle at 75-80c in well cooled P180 :o
- Replies: 15
- Views: 8548
- Sun Aug 12, 2007 7:32 pm
- Forum: Fans and Control
- Topic: 9v/10v Fans
- Replies: 3
- Views: 2734
I have the same fans in the same case. I currently have 4 installed (1 on CPU heatsink, 1 at back of case, 1 blowing on graphics card, and 1 in lower chamber) I also have the same components (E6600, 8800gts, 2gigs of ram) I have the one of the CPU heatsink running at 975-1025 rpms which is about 9 o...
- Sat Aug 11, 2007 4:47 pm
- Forum: Off Topic
- Topic: My outlets aren't grounded, how bad is this?
- Replies: 36
- Views: 23775
- Sat Aug 11, 2007 2:30 pm
- Forum: Off Topic
- Topic: My outlets aren't grounded, how bad is this?
- Replies: 36
- Views: 23775
- Sat Aug 11, 2007 9:58 am
- Forum: Off Topic
- Topic: What are you listening to right now?
- Replies: 4309
- Views: 2592727
- Thu Aug 09, 2007 4:59 pm
- Forum: System Advice / Troubleshooting
- Topic: PC Stress Test Software - What To Use?
- Replies: 7
- Views: 4203
- Thu Aug 09, 2007 12:12 pm
- Forum: System Advice / Troubleshooting
- Topic: PC Stress Test Software - What To Use?
- Replies: 7
- Views: 4203
Intels Thermal Analysis tool puts TONS of stress on your CPU. I just use Orthos, it puts like 95% load on both cores, while TAT puts 100% on both. As for graphics card, I use the Smoke Test, or ATI Tools Find Artifacts test. Rev B. is horrible in my opinion, unless your gonna get another retention k...
- Tue Aug 07, 2007 1:15 pm
- Forum: Video Cards & Monitors
- Topic: 8800 GTS Noise Level?
- Replies: 131
- Views: 132514
- Mon Aug 06, 2007 2:00 pm
- Forum: Fans and Control
- Topic: WTB: 2 120mm BLACK TriCool Antec fans
- Replies: 2
- Views: 2290
- Mon Aug 06, 2007 1:57 pm
- Forum: CPU Cooling
- Topic: lapped my IHS on a Q6600 (pics and results)
- Replies: 16
- Views: 12610
- Sat Aug 04, 2007 8:03 pm
- Forum: Video Cards & Monitors
- Topic: 8800 GTS Noise Level?
- Replies: 131
- Views: 132514
Well after doing 2 things.... Put a a metal vent underneath the 8800gts to catch hot air and force it outside the case Adding a second fan to that compartment blowing right on the 8800gts. ...My idle temps droped from 73c to 68c. Ya, 5c drop, I think thats pretty good. Its obvious it just needed mor...
- Sat Aug 04, 2007 4:28 pm
- Forum: Video Cards & Monitors
- Topic: 8800 GTS Noise Level?
- Replies: 131
- Views: 132514
- Fri Aug 03, 2007 6:41 pm
- Forum: Video Cards & Monitors
- Topic: 8800 GTS Noise Level?
- Replies: 131
- Views: 132514
I have the same problem, I idle at 73c, (load is only 78c), and when I take the side panel off, my temps go to 61c idle and 69c load. I replaced the thermal paste on the core with Artic Silver 5 and it dropped the temps 4c to the above temps, so they were even worse before. I was wondering what I ca...
- Wed Jul 25, 2007 1:34 pm
- Forum: Cases and Damping
- Topic: How quiet is a P182 with 4 1350RPM Yate Loons?
- Replies: 6
- Views: 4372
http://www.jab-tech.com/YATE-LOON-120mm-Case-Fan-D12BL-12-Low-Speed-Ball-Bearing-pr-3772.html I got 4 of those is a p182, all around 7v and theyre very quiet. I can only hear them during the middle of the night when I'm not playing games or listening to music. The slightest rustling, like even my ca...
- Wed Jun 27, 2007 1:04 pm
- Forum: CPU Cooling
- Topic: E6600, Ninja with Fan, Ambient 25c, Idle 31, Load 65
- Replies: 4
- Views: 3054
- Wed Jun 27, 2007 6:58 am
- Forum: CPU Cooling
- Topic: E6600, Ninja with Fan, Ambient 25c, Idle 31, Load 65
- Replies: 4
- Views: 3054
E6600, Ninja with Fan, Ambient 25c, Idle 31, Load 65
I just built my first comp with the following components: E6600 with Ninja 8800gts Corsair 520HX Corsair XMS 2x1gb p180b The cooling set up is as follows: 1 Yateloon in the Front pulling air in 1 Yateloon on the Top of the case 1 Yateloon on the Back of the Case 1 Yate Loon Mounted on Ninja I used a...
- Tue Jun 26, 2007 7:53 am
- Forum: Video Cards & Monitors
- Topic: 8600gts Vs. 8800GTS
- Replies: 10
- Views: 8561
- Thu Jun 21, 2007 7:55 pm
- Forum: Cases and Damping
- Topic: Antec P182SE
- Replies: 2
- Views: 2975