Search found 138 matches
- Tue Jul 14, 2009 7:53 pm
- Forum: CPUs and Motherboards
- Topic: Which AMD Heatsinks have correct fan orientation?
- Replies: 7
- Views: 4177
From your list, only the NH-U12P has the mounting hardware required to install on a AMD platform in the orientation you want. The HR-01 plus could probably be used as well but you would need to purchase an additionnal S-clip bracket to make it work and it's been a while since i saw that in stock. An...
- Thu Feb 26, 2009 9:34 pm
- Forum: General Gallery
- Topic: My Silent Cheapie Case Rig
- Replies: 6
- Views: 5534
More than mass loading, the ice packs in an Alleycat enclosure are also meant to transfer the HD heat to a metal box to help dissipation. And sealing that metal box also helps cut on some high frequencies simple mass loading will not help with. By using ice packs in a cardboard box ( plus foam on th...
- Mon Feb 16, 2009 7:06 am
- Forum: Video Cards & Monitors
- Topic: Sapphire 3850 AGP and AC S1 rev.2
- Replies: 2
- Views: 2302
Hello mits, That topic was already discussed in this thread : http://www.silentpcreview.com/forums/viewtopic.php?t=48079 which points you to this thread : http://www.octeamdenmark.com/forums/showthread.php?t=1421 where you see there is no difference in mounting holes spacing Otherwise with a quick s...
- Fri Jan 30, 2009 2:34 pm
- Forum: Cases and Damping
- Topic: P182 - Different color schemes?
- Replies: 4
- Views: 2728
The P182 only comes in gun metal grey but the original p180b shipped in silver and black. I don't know if the p180 is still manufactured/available but the latest p180 i had my hands on actually included the p182-like modifications (like easier cable management). So if you can find a p180 black somew...
- Thu Jan 29, 2009 9:48 pm
- Forum: Off Topic
- Topic: How to build a LOUD comput0r
- Replies: 30
- Views: 14148
Let's have fun ! If i had to do this, i would get the lightest case possible and try to loosen screws or rivets to spruce up vibrations, make sure it has the smallest/most restrictive grills at intake and exhaust possible. Why not cut a few blowhole to weaken the case structure some more and allow m...
- Tue Jan 06, 2009 10:08 pm
- Forum: Silent Storage
- Topic: HDD enclosure, I want to buy one
- Replies: 1
- Views: 2043
Hello ioan666 and WELCOME TO SPCR. The Xilence cooler is the same as a previous scythe HD cooler and those were not good at silencing a HD. Scythe SQD-1000 and Tuniq Sanctum seem to have a similar internal design but since the Sanctum seems to only be able to be placed in a 5.25" bay, it would proba...
- Tue Jan 06, 2009 9:53 pm
- Forum: Video Cards & Monitors
- Topic: AC S1-S2
- Replies: 5
- Views: 4027
Hello khromosone From what i could gather on forums, the 4870 is by no means a very cool card so trying to cool it with the S2 would not be advised and anyway it does not seem to be compatible with the series : http://www.arctic-cooling.com/vga2.php?idx=125 The Accelero S1 is a better cooler but do ...
- Mon Jan 05, 2009 1:42 pm
- Forum: Silent Storage
- Topic: How good are silicone casing for silencing hard drives?
- Replies: 8
- Views: 4238
I have never used this kind of silicone "skin" for HDs but my hunch is that it would not really help if you use them. Cutting legs and some holes for airflow would leave only some strips of silicone squeezed between the sides of the HDs and the case. Mechanically, if it is squeezed, it will do nothi...
- Sat Jan 03, 2009 4:36 pm
- Forum: Cases and Damping
- Topic: Antec P182 Super
- Replies: 6
- Views: 3853
AFAIK we have yet to find a fan controller that will NOT fit in the p182 so yes you have nothing to worry about. It was already discussed in lots of threads so try searching the forum next time : - Scythe Kaze Master review in a p182 http://www.silentpcreview.com/forums/viewtopic.php?t=46494 - Other...
- Thu Dec 25, 2008 8:45 pm
- Forum: Power Supplies
- Topic: Zalman 850W Buzzing?
- Replies: 12
- Views: 6148
Unfortunately, as far as i can tell from my own experiences, it's really difficult to predict whether or not you will experience the buzzing as some combination of GPU/PSU/MB/Software will give you different results. I have the same problem on my own computer : with my A8V deluxe anytime there is a ...
- Tue Dec 16, 2008 9:14 am
- Forum: CPU Cooling
- Topic: Xigmatek HDT-S1283 and am2 problem
- Replies: 6
- Views: 4616
As far as i know, there is no known method of attaching the S1283 in a vertical orientation on a AMD board. There is no commercial "conversion" product so far and DIY would be very involved (meaning you would need to have access to a CNC metal mill, okay maybe that's a bit of an exaggeration) Therma...
- Sun Dec 07, 2008 9:56 am
- Forum: CPU Cooling
- Topic: Rear facing AM2 cooler
- Replies: 3
- Views: 2574
Among the millions HDT-S1283 clones, the Sunbeam Core Contact Freezer AFAIK is the only one that has the "right" orientation natively on the AM2 socket. It has a fourth heatpipe and a slightly different shape but has comparable or better performance that the S1283. Due to its cheaper price, i would ...
- Wed Dec 03, 2008 10:59 am
- Forum: Off Topic
- Topic: Screen Protectors
- Replies: 6
- Views: 3471
It is my second post mentionning this company so people are going to start thinking i actually work for them :-) but i bought a few screen protectors for various devices from www.dealextreme.com and am pretty happy with them, even the one for my nintendo DS that take some beating when i play stylus ...
- Sat Nov 29, 2008 8:38 pm
- Forum: Fans and Control
- Topic: Scythe Gentle Typhoon Fans by Nidec Servo Corp
- Replies: 67
- Views: 95606
- Sat Nov 29, 2008 8:28 pm
- Forum: Deals, Vendors and Classifieds
- Topic: Generic Zalman FanMate2, ~$4 shipped on Ebay
- Replies: 2
- Views: 2146
The exact same product is sold a dollar cheaper on dealextreme.com http://www.dealextreme.com/details.dx/sku.13913 Another version is a bit more expensive but i can't seem to spot differences http://www.dealextreme.com/details.dx/sku.14351 They claim to have RPM alarm in case the fan dies but it is ...
- Mon Nov 10, 2008 12:58 pm
- Forum: CPU Cooling
- Topic: HDT-S1283 socket AM2 clip or HR-01-K8
- Replies: 3
- Views: 2794
Hello Ch0z3n, I also considered the HDT-S1283 for my AMD setup, but never could find a way to mount it in a "front-to-back' orientation. The only product that could have done the trick is the thermalright S-clip used to mount thermalright products in the right orientation on AMD sockets but i never ...
- Thu Nov 06, 2008 9:39 pm
- Forum: System Advice / Troubleshooting
- Topic: Crashing / Freezing PC
- Replies: 7
- Views: 4534
Just as a quick side note, as it could perfectly not be the cause of your particular problem, the fragmentation problem i was referring to caused fragmentation on the first disk write. Like download a 20mo file from the Net and boom, enjoy your newfound 250 fragments right after the download finishe...
- Mon Nov 03, 2008 10:34 am
- Forum: System Advice / Troubleshooting
- Topic: Crashing / Freezing PC
- Replies: 7
- Views: 4534
Hello steevie_b, If you recently formated/updated/reinstalled all your drivers and then it began to crash as compared to older drivers before with no crash, i would suspect the motherboard, especially the VIA chipset. This is a long shot but try and see what is the level of fragmentation you have on...
- Sun Nov 02, 2008 1:16 pm
- Forum: System Advice / Troubleshooting
- Topic: Fanless AGP video cards?
- Replies: 6
- Views: 3920
Hello gimmeagig, Unfortunately, i never had the chance to deal with newegg as until recently, there was no canadian branch, and Newegg USA was unwilling to ship to Canada. Now, there is a canadian newegg but their prices are so ridiculously high and their inventory so limited it just does not seem w...
- Sat Nov 01, 2008 8:50 pm
- Forum: System Advice / Troubleshooting
- Topic: Fanless AGP video cards?
- Replies: 6
- Views: 3920
Hello gimmeagig and welcome to SPCR, Current AGP cards are no longer manufactured by ATI/NVidia and only 3rd party manufacturers like Asus, Sapphire and Powercolor offer current-generation cards in AGP. But if you want fanless, the only one i know is the ASUS AH3650 SILENT/HTDI/512M. It will be powe...
- Fri Oct 03, 2008 3:58 pm
- Forum: Cases and Damping
- Topic: p182 bottom chamber+foam : avoiding PSU airflow obstruction
- Replies: 0
- Views: 1710
p182 bottom chamber+foam : avoiding PSU airflow obstruction
Hello all, i am currently trying to fit my P182 with some polyurethane acoustic foam but i am having a lot of trouble designing the cutouts without messing cable management and psu airflow. Currently, i have in the bottom chamber a VX450 (fan down), no fan on the bracket and a 3.5 WD HD in a Scythe ...
- Thu Oct 02, 2008 7:32 pm
- Forum: Deals, Vendors and Classifieds
- Topic: Antec Mini P180 in Canada : 57$ + 32$ shipping = 89$
- Replies: 1
- Views: 1761
Antec Mini P180 in Canada : 57$ + 32$ shipping = 89$
Hello all,
For us lucky canadian fellows, directcanada offers the mini p180 at an extremely interesting price of 90$ everything included
http://www.directcanada.com/products/?sku=10370AC8796
Be quick if you want one, the stock is limited it seems.
For us lucky canadian fellows, directcanada offers the mini p180 at an extremely interesting price of 90$ everything included
http://www.directcanada.com/products/?sku=10370AC8796
Be quick if you want one, the stock is limited it seems.
- Wed Oct 01, 2008 7:29 pm
- Forum: Deals, Vendors and Classifieds
- Topic: NewEgg coming to Canada
- Replies: 11
- Views: 5901
Newegg Canada is now up. But after a quick glance : - Inventory is somewhat limited, especially for silencing products. (I mean there is ONE (1) thermalright product available....) (that can be excused for now and hopefully improved in the near future) - Prices are pretty high compared to obvious co...
- Fri Sep 12, 2008 6:56 pm
- Forum: Fans and Control
- Topic: How to quiet my currently noisy SFlex 21E
- Replies: 4
- Views: 3234
A S-Flex SFF21E, at 1200 rpm, is far from what i would call very noisy (yes i know we all have a different definition of what noisy is but still...), especially if no other steps were taken to silence the computer yet. (Maybe a lot of backpressure ?) Factor in the fact that it is 4pin-only (whereas ...
- Sun Sep 07, 2008 4:22 pm
- Forum: Cases and Damping
- Topic: Difference in screws?
- Replies: 6
- Views: 3649
It's kind of funny i stumbled on a wikipedia article on this subject not too long ago.
It is by no means an exhaustive reference but a good read nonetheless :
http://en.wikipedia.org/wiki/Computer_case_screws
Happy tinkering
It is by no means an exhaustive reference but a good read nonetheless :
http://en.wikipedia.org/wiki/Computer_case_screws
Happy tinkering
- Thu Jul 31, 2008 7:38 pm
- Forum: Deals, Vendors and Classifieds
- Topic: NewEgg coming to Canada
- Replies: 11
- Views: 5901
I also live in Canada and the only time i ever ordered from Tigerdirect was to order an otherwise impossible to find S939 CPU. They still like to make all-in-one bundles with bad hardware but they are usually pretty cheap and anyway no one is forcing you to order bundles (And if you buy bundles on i...
- Thu Jul 24, 2008 7:42 am
- Forum: Cases and Damping
- Topic: Sonata 2, big CPU heatsink: easy to install PSU?
- Replies: 3
- Views: 2415
Hello RaptorZX3 you sure seem to have a lot of trouble deciding how to do it (second thread on this subject no less :-) ). Sadly i have no direct answer for you but.... i know some peoples just removed the whole board from their case to remove and install a PSU, but i wanted to know if some of you s...
- Thu Jul 17, 2008 6:14 pm
- Forum: Cases and Damping
- Topic: P182 fans not starting automatically?
- Replies: 2
- Views: 2001
Hello demorgan and welcome to SPCR. This problem has already been discussed on the forum (though i can't quickly find a link to the relevant thread) but to cut a long story short, the problem is due to a defective batch of fans. For a while after noticing this problem, Antec included a second batch ...
- Sun Jul 13, 2008 8:11 pm
- Forum: CPUs and Motherboards
- Topic: E1200 stock heatsink / fan information?
- Replies: 2
- Views: 2234
Hello weboweb, After a quick search on google images, i stumbled upon this thread http://forum.twcarpc.com/showthread.php?t=459 where you can get all the info you need i think (well pictures at least unless you can speak chinese) At first glance, the HSF looks like the standard 775 HSF included with...
- Mon May 26, 2008 12:43 pm
- Forum: Video Cards & Monitors
- Topic: So many cards...
- Replies: 3
- Views: 2386
Some manufacturers, like eVGA, allow you to change the cooling solution without voiding warranty. That was discussed in a previous thread http://www.silentpcreview.com/forums/viewtopic.php?t=45917 about 8800gt cooling wehre you can find information about coupling a 8800gt to an Accelero S1. Have Fun...