Sorry guys, I've been very busy lately...

Thanks for all the comments tho! I'll update this post and the end of this week again with new photos, temps etc!

Nice build, I'm planning on very similar (same case, PSU, MoBo, and CPU cooler). Where there problems with CPU heatsink installation? Did you use stock mount, or pass through bolts? Any deformation or stress on motherboard? No problems so far. But the fan of the ninja does touch my OCZ memory. But ...

First I need to get Windows XP stable running.. (had some bad copy's). But I do wonder how far I can go with just a Ninja and 3 casefans.

ajd344 wrote:Whoooa. Nice! Someday I hope to build a computer that nice, quite similiar to one you made. Of course I need a lot of money, lol. How much did that set you back?

Thanks! Like I mentioned before this is a pretty budget computer. It only cost me total of 900 euro's!

For different reasons, 1) yes because it was modular (to get a tidy case) 2) it is DAMN silent! 3) 520 maybe overkill but rather be on the save side 4) 5 year warenty! I wouldn't go as far as calling it silent... As for overkill, it's nearly 400W more power than your system will draw. A good 300-35...

oh and here are some temps:

Thanks for the comments guys so far! That's a whole lot of pics :!: :shock: -- some pretty good ones, too. ;) Obviously nice work, looks like a good system. So... how quiet is it? As I'm sitting 1m from the case (I can touch it when i sit begind the PC) you can't hear the PC at all. The only time y...

SO! After I was away for a year, I came back to my old Athlon XP PC. So it was time for a new rig. Since I spend a lot of time behind it and cause its in my room, it's nice to have a quiet rig. Anyway, a week or 2 ago I started reading reviews etc etc etc, ended up ordering the PC and yesterday the ...

I've my E6750 with a passive Ninja Rev. B. and its idle between 38/41 C. I havent been able to test in stress yet.

I think its a bit high so I'm bussy lapping my Ninja right now. I've got 4 Nexus fans right now, but i think im gonna do a different setup. Im gonna post pics soon (later 2nite I hope).

Uh... HDCP... Right...

Mine says: "HDCP Compliant" aint this good enough?

@ ALEX: * I've read about the "taping lowe chamber" thing. But I still dont get what part or wich holes? Could you perhaps be a bit more specific about this (with like a picture(s)) @ LAGUZ1 ~ As you have guessed, The Corsair is already ordered. But the extra watt aint a problem I guess for the futu...

Thanks for the info laguz1. I should have posted more specs (I hope im not hijacking this topic now). (I still have to receive all the hardware in the next couple of days) + The Ninja will cool a E6750 that i will be running around 3.0Ghz. But I wonder if I can have a E6750 at 3.0 passive cooled wit...

Does the type of elastics make a difference when you build a HD suspension?

And with "type" I mean, like flat elastics or rounded elastics

Flat:


Rounded:

I also had a similar topic discussion on another forum. Here is my picture: http://mutednation.com/img/Antec_P182_Casefans_2.jpg One of the question were/are: 1) Would you advice to place a fan on 4 AND 5 at the same time? But do bear in mind that I want to have a Ninja Rev B with no fan + I have a ...

Sounds nice. I've recently been reading some reviews again and I'm getting frustrated about all the different outcomes of the reviews. Some say Nexus fans are one of -or the best fans with the best noise/CFM ratio. Others say Nexus is even below average. Noctua's are out of the question for me, caus...

Oh never mind I see you already are being an ass on the SPCR forum: confirmed: ninja B is garbage. THERMALRIGHT RULEZ http://www.silentpcreview.com/forums/viewtopic.php?p=356049&highlight=#356049 EXECUTION OF NINJA MURDERER (REV. B) [thread probation] http://www.silentpcreview.com/forums/viewtopic.p...

Sorry to say, but your comments so far are kind a lame. We get your a f*cking Thermal fanboy.

Damn, are you kidding me? So the Nexus fans already have Fan Mounts included? So I ordered them for nothing... (4x4!).
If you're sure about this, I will try to cancel the order for the fan mounts.

How come you bought 13 fans? :p

Thanks for this "Cutting Guide". I recently also ordered 4 120MM Nexus fans with the Nexus fan mounts http://www.azerty.nl/_azerty/data/product/2/7/5/27578/img/1/G.jpg It looks like you got a new "version" of the fan with no corners? I hope I also get this version, saves me time and hassle cutting t...

My main concern with the bolt-thru mounting system is that I might screw them too tight. Can any one tell me "what might be too tight" ? Are they talking about the motherboard of the CPU when they say too tight? And IS it actually possible to screw it too tight? I mean, you can't really force it can...

I will definitely post some pics as soon as I get all the parts. I'm hoping they will arrive next week.

BUT I was actually hoping that I could use the top plate as well and not only the backplate. I've been looking for photo's with this kit in combination with a ninja.

thank you panda-R. His first comment was a bit weird ;s

I knew about the mounting problem, so I also ordered this:



I hope this will fit on the Ninja.

I know there are some issues with the mounting, but since when is the Ninja total crap now? 90% of all the reviews are positive.

And if so, which one would YOU recommend then since you think the Ninja aint good.

Hi guys (new here),

The thing I get out of this, is that SPCR has a big and very good reputation within the "Quiet PC Market". That some one would put so much effort and time do pull a "scam" like this.

So you could look at it from a positive view!

Hey guys, I was looking on the net for some Ninja mods and I came across this one, It might be usefull for those you use a fan on the Ninja. It's in Spanish I think so you will need to translate it with http://babelfish.altavista.com/ Link to mod: http://www.acusticazero.com/content/view/78/29/1/1/ ...

Hey Guys, I just joined the whole "Folding@Home" project. I also added SPCR's team number. I have to say, how come I have never heard of this before? There should be a big worldwide campaign about this. I know for sure like 95% of the people never heard of this project. This is one of the easiest wa...