Search found 42 matches
- Thu Mar 29, 2012 12:40 am
- Forum: SPCR Article Discussion
- Topic: Logic Supply LGX AG150 Fanless Mini PC
- Replies: 31
- Views: 17312
Re: Logic Supply LGX AG150 Fanless Mini PC
Drivers for the chipset or what drivers do you mean? Product family Chipsets Product line Embedded Chipsets Product name Intel® NM10 Express Chipset Operating System Windows 7 (64-bit)*(5) http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&ProdId=3304&lang=eng&OSVersion=Windows%207...
- Wed Mar 28, 2012 11:20 pm
- Forum: SPCR Article Discussion
- Topic: Logic Supply LGX AG150 Fanless Mini PC
- Replies: 31
- Views: 17312
Re: Logic Supply LGX AG150 Fanless Mini PC
Hmm you say it have no 64bit support.
But if you check Intel's spec for the CPU it have "Intel® 64".
http://ark.intel.com/products/58917/
But if you check Intel's spec for the CPU it have "Intel® 64".
http://ark.intel.com/products/58917/
- Wed Apr 27, 2011 1:21 am
- Forum: SPCR Article Discussion
- Topic: Antec ISK 100 Mini-ITX Case
- Replies: 19
- Views: 13600
Re: Antec ISK 100 Mini-ITX Case
Any chanse to fit a Scythe Big Shuriken in this case??
If you only use the Case fan and no fan on the heatshink??
If you only use the Case fan and no fan on the heatshink??
- Tue Dec 15, 2009 4:53 am
- Forum: Power Supplies
- Topic: how much could i run with a 400w power supply
- Replies: 8
- Views: 3870
With a Corsair 400w i did run this with some OC.
Core i7 [email protected]
Asus Maximus II gene
Corair 3x2gb XMS3
2 x Radeon 4770 crossfire
Intel X25-m
That machine did peek at about 330w.
Core i7 [email protected]
Asus Maximus II gene
Corair 3x2gb XMS3
2 x Radeon 4770 crossfire
Intel X25-m
That machine did peek at about 330w.
- Fri Dec 04, 2009 8:44 am
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
Ok, so i did remove the NB Zotac sign and did move the CPU fan abit closer to the NB and my new temps are after 2h Linpack+Furmark: CPU: 67c GPU: 90c HDD: 37c Can't fit any fans were the 2x80mm fan bay was. Gona watch a bluray movie and se the temps after a movie. this is the exact same setup i'm lo...
- Tue Dec 01, 2009 11:41 am
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
Ok, so now i have got my Antec ISK-300 case :) So first atempt is to fit everything with no mods. I did remove the orginial PSU sins i am gona use my picoPSU and i did remove the side fan mount (don't think i need any more fans). Here you can see that some of the top part of the case is touching the...
- Tue Nov 24, 2009 11:43 am
- Forum: CPUs and Motherboards
- Topic: New version of Zotac 9300 ITX
- Replies: 23
- Views: 30893
New version of Zotac 9300 ITX
Did youst see a new Version of the Zotac 9300 board that have some new whanted fetures :) GF9300-G-E (PCB04) has the following differences from earlier PCB versions: DVI is Dual-Link, not Single-Link; S/PDIF header added to board; 3x SATA instead of 2x SATA; CPU/RAM undervoltage now possible (overvo...
- Tue Nov 24, 2009 11:33 am
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
- Wed Nov 18, 2009 9:32 am
- Forum: CPU Cooling
- Topic: Undecided on low-profile CPU cooler
- Replies: 6
- Views: 3514
Go for the Big Shuriken, it works geart for me on my ITX htpc.
Cool my E7200 silent and cool
viewtopic.php?t=55204
Cool my E7200 silent and cool
viewtopic.php?t=55204
- Wed Nov 11, 2009 3:31 am
- Forum: CPUs and Motherboards
- Topic: Socket 1156 / mATX & Coolers
- Replies: 2
- Views: 2364
- Mon Nov 09, 2009 4:50 am
- Forum: Watercooling
- Topic: water + i7 + sff
- Replies: 15
- Views: 11586
- Thu Nov 05, 2009 11:05 am
- Forum: Power Supplies
- Topic: New PSU for Antec NSK1300
- Replies: 12
- Views: 8208
- Thu Nov 05, 2009 5:34 am
- Forum: Power Supplies
- Topic: Looking for a quiet PSU option in Antec Fusion case
- Replies: 7
- Views: 3609
My old HTPC was with a Antec Fusion and Corsair CX400 and the did work fine, only nois that did come from the case was my 2.5" hdd. It dosen't mather that the CX400 have tons of cabel that you don't need sins the case is "split" in 2 part so it is only the ODD+PSU on the left side. Did use a Scythe ...
- Thu Nov 05, 2009 1:16 am
- Forum: CPUs and Motherboards
- Topic: ITX board for NAS/FW server ??
- Replies: 7
- Views: 4239
Re: I have that case
I have the chenbro case, the motherboard I got for it is this one: http://www.logicsupply.com/products/ms_9832 It has 4 sata ports, but I added a half-height pci sata board (using the riser http://www.logicsupply.com/products/80h094340 ) to add 2 more ports internally for the 2.5" and the optical d...
- Thu Nov 05, 2009 12:56 am
- Forum: Power Supplies
- Topic: New PSU for Antec NSK1300
- Replies: 12
- Views: 8208
If you have observed 220W power draw from the wall and your PSU is 80% efficient (the current standard for good PSU's), then your system was drawing only a maximum of 176W. So that is well within the capacity of Dell DA-2. Uday I did test on a PSU that is 80+ Gold (90%) and at the wall i did show a...
- Wed Nov 04, 2009 4:29 am
- Forum: Power Supplies
- Topic: New PSU for Antec NSK1300
- Replies: 12
- Views: 8208
- Wed Nov 04, 2009 2:25 am
- Forum: Power Supplies
- Topic: New PSU for Antec NSK1300
- Replies: 12
- Views: 8208
Ye, both the Winmate board and usual PicoPSU is to week, the system take about 180-220w on full load. Gona check out that topic. Edit: These two PSU i have looked at: http://www.be-quiet.net/be-quiet.net/index.php?StoryID=556&websiteLang=en http://www.chieftec.eu/index.php?option=com_content&task=vi...
- Wed Nov 04, 2009 1:28 am
- Forum: CPUs and Motherboards
- Topic: ITX board for NAS/FW server ??
- Replies: 7
- Views: 4239
Sure it can me mATX if you can find a case that is with in these dimensions (w:150 h:300 d:300 mm) and have hot-swop or easy access for 4x3.5" disk, can't fit any bigger case were it's gona stand. Was planing to use the Chenbro ES30068 case. 4x disk for storage and 1 for OS. www.itxdepot.com don't s...
- Wed Nov 04, 2009 12:29 am
- Forum: Watercooling
- Topic: water + i7 + sff
- Replies: 15
- Views: 11586
for an i7 alone your going to need more then a 120mm rad. No 1x 120mm is enuff. I am atm building my setup inside a Coolermaster Elit 340. I am testing if i am only gona run 1x120mm rad or 1x240mm rad och both. 1x120mm rad with 2x120mm Nexus@7v in puss-pull config and i am running the CPU @4.2Ghz i...
- Tue Nov 03, 2009 11:41 pm
- Forum: Power Supplies
- Topic: New PSU for Antec NSK1300
- Replies: 12
- Views: 8208
New PSU for Antec NSK1300
I did get a hold Antec NSK1300 case but the PSU inside it is broke. So now i am looking for a new PSU that can fit in the same place as the old one or between the motherboard and the front panel of the case. It need to power this setup: Q9300@3.0 Gigabyte G41 motherboard Ati 4850 or 4770 2x3.5" HDD'...
- Fri Oct 30, 2009 5:16 am
- Forum: CPUs and Motherboards
- Topic: any Socket P MotD mobo's out yet?
- Replies: 126
- Views: 111766
- Fri Oct 30, 2009 4:43 am
- Forum: CPUs and Motherboards
- Topic: ITX board for NAS/FW server ??
- Replies: 7
- Views: 4239
ITX board for NAS/FW server ??
Hi. I am looking for a ITX board that have 5 or more Sata port and 2xGbit lan. Or 4 sata + 1x mini pci-e slot (can use a pci-e SSD for system disk). Neet to be atlest a atom 330 och higher. The motherboard that fills all my need is Gigabyte GA-6KIEH-RH BUT i can't find any shop that sell it inside E...
- Sun Sep 20, 2009 12:46 pm
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
Re: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
It is :lucky-dirk-henning wrote:Hi Merlinen,
this is a very nice and interesting post of yours.
Could you perhaps indicate the exact part number of
that low profile Kingston ram you have installed (KTH - ????)?
I can't read it in your picture.
Thank you very much.
KTH-XW4400C6/1G
1.8V
BKME0850932
- Mon Sep 14, 2009 2:33 am
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
Re: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
So i did get my Big shuriken to day and i have read that it is some problems mounting it on a Zotac 9300 itx board. I am still missing my blu-ray and case for my HTPC :) Setup is: Zotac 9300 C2D E7200 PicoPSU tx150 and so on (se my sign). I am running the fan in 720rpm, and it's realy inaudible. Hi...
- Sun Sep 06, 2009 11:10 pm
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
- Fri Sep 04, 2009 4:46 am
- Forum: CPU Cooling
- Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
- Replies: 40
- Views: 43706
I will, but Antec ISK300 ain't easy to find atm in Sweden
http://www.prisjakt.nu/produkt.php?p=445874
http://www.prisjakt.nu/produkt.php?p=445874
- Thu Sep 03, 2009 1:14 pm
- Forum: CPU Cooling
- Topic: When will Intel release 32nm desktop cpus?
- Replies: 13
- Views: 6129
- Thu Sep 03, 2009 12:33 pm
- Forum: CPU Cooling
- Topic: When will Intel release 32nm desktop cpus?
- Replies: 13
- Views: 6129
Well depends on what CPU, don't think a Core i7 870 will be "obsolete" in a few month :) And Clarkdale looks more like low-end cpu, same with Arrandale. And Gulftown is realy high-end CPU that is gona start in a price range of 999$+ :shock: Don't see any1 that would replace the new i5/i7 Lynnfield C...
- Thu Sep 03, 2009 11:50 am
- Forum: CPU Cooling
- Topic: When will Intel release 32nm desktop cpus?
- Replies: 13
- Views: 6129
- Thu Sep 03, 2009 10:48 am
- Forum: CPU Cooling
- Topic: When will Intel release 32nm desktop cpus?
- Replies: 13
- Views: 6129
32nm is "Clarksdale" and as you can see on this chart it is onley for socket 1156.
http://www.guru3d.com/news/intel-core-i ... confirmed/
http://www.guru3d.com/news/intel-core-i ... confirmed/