Yeah, the successors are the HP II / MP. Coolingtechnique had a look at the F120MP and F140HP II. http://coolingtechnique.com/recensioni/air-cooling/dissipatori/1581-recensione-phanteks-ph-tc12ls-e-ph-tc14s.html?showall=&start=5 Great performance and acoustics in my honest opinion. Might consider tr...

Here's the RPM range of the stock GP14 in my Define R5. Placed on front, infront of it is the lower drive cage with a single HDD on the bottom and single SSD middle. Both side panels were off but shouldn't affect much? https://dl.dropboxusercontent.com/u/39370946/MuroBBS/Define%20R5/GP-14%20RPM%20ra...

Hi Steve, I think there is some misunderstanding. That's an old layout, I referred to it just to show what the interior is like in my machine. Like I said "I have two 120mm fractal stock fans in the front and BeQuiet Silentwings Top 140mm (disconnected extra fractal 120mm, as it was buzzing)." Its ...

Nice looking case! Good job

And on the topic of the GPU cooler, your current card also has the heatpipes like the Accelero Xtreme has and the fins in the "wrong" direction.
I'd consider going with 140mm AIO route + beefier heatsinks to VRM and VRAM.

Rather not create yet another R5 thread so here's my build which transfer I completed from Lian Li PC-A05NB to this R5 on monday. Sharp looking build you have there! How's the 670gtx, sound-wise? Aren't you worried that the Titan might increase the noise level? Or are you more concerned with the ad...

Rather not create yet another R5 thread so here's my build which transfer I completed from Lian Li PC-A05NB to this R5 on monday. https://dl.dropboxusercontent.com/u/39370946/MuroBBS/Define%20R5/closeup_small.jpg https://dl.dropboxusercontent.com/u/39370946/MuroBBS/Define%20R5/interior_small.jpg htt...

I hope everyone now realizes that this is a non issue since Haswell is out now. The S0ix isn't even enabled on these desktop SKU's. Even though the new S0ix active idle states are not enabled, the old S3 sleep state is still there. According to Anandtech, the S3 state consume about the same power a...

I hope everyone now realizes that this is a non issue since Haswell is out now.
The S0ix isn't even enabled on these desktop SKU's.

Well I'm an Intel fan. Quite a big Intel fan. But I care for perf per watt and mainly just perf.. I seriously DO hope AMD to get back in the game. At least with iGPU's they rock. I still don't like their APU's power consumption though. My updated HTPC pulls 95w with IBT+Furmark going on full blast. ...

Those doubting my results go read OCN's delidding club. Lots of folks there with even better results. And you might want to check Idontcare's thread over at Anandtech forums. He has documented this delidding stuff really well and why we get such a good results. (which is the IHS distance from the di...

I rebuilt my HTPC lately using the DH77EB. It's a wonderful board and I recommend it to anyone! :) Here's the setup Intel Pentium G2120 CPU + Noctua NH-U12P passive Intel DH77EB mATX MB Kingston 2x4GB 1600Mhz CL9 1.35v Gigabyte HD5670 + Accelero S1 rev2 passive Samsung 830 64gb OS drive WD1001FALS 1...

Here's my results on delidding 3770K and putting Liquid Pro between the IHS and the die 8) Before 4.3Ghz 1.155v* http://i.imgur.com/06SASS1l.jpg After 4.3Ghz 1.155v* (didn't touch any settings in between) http://i.imgur.com/mJa376Vl.jpg After 4.5Ghz 1.186v* ** http://i.imgur.com/DaukU0Yl.jpg So befo...

I figure this is the most appropriate thread for my question. I'm looking to get a DH77EB. I'm wondering about the bios fan control. What's the lowest setting you can put your fans with Intel fan control? I mean does it have some fixed rpm or %? I'll probably be using two Akasa Apache 120mm PWM fans...

Thank you! Very very good review :) Read the review and thinked "what if I would slap a 92mm GT on this thing" and came to read this thread and noticed herby asked the same thing. I happen to have a 92mm GT (1700rpm) sitting useless in my stuff box.. Should be quite good this kind of cooler, the sta...

Old thread but let's bump it anyway :D Was doing some experimenting with the voltage on my 2500K last night. Dropped clocks to 40x100 and started lowering the voltage. 1.152v at 4Ghz :mrgreen: Dunno if that's good or good but I like it. It was Prime95 stable with 1792k FFT with 4096mb mem load, good...

Yeah. Well I suppose it should fit.. Since the mounting hole pattern is the same as reference, and by looking at a pic of reference 560ti pcb and a pic of msi 560Ti TFII/OC pcb the gpu core itself looks like its approximately in the same position. And that msi card doesn't have stacked dvi/whatever ...

Hello. Decided to ask on this forum also. I have a MSI gpu as the title says. I'm getting an Accelero Xtreme Plus sometime during the week after the next. I've heard that apparently AXP only fits reference design cards. And the MSI card I've is their own design. So I'm looking for an answer does it ...

Read and totally agree. I like the clean look of SPCR.

Nah, I just decided to start from scratch so I just sold it all at once. And since I wanted a smaller case and that D14 wouldn't have fitted inside this case.. And yeah, that freezer+GT combo is doing just fine, currently I have a bit modest oc on the 2500K, only 4Ghz but thats enough for me right n...

Hello. Decided that my first post would be here :) My previous rig (Q9550-460GTX SLI-780i SLI-TX650 etcetc) was pretty much noisy as hell. So I sold it mid-january and decided to build my new pc as silent as I could with limited resources. And for the curious ones, here's a pic of the old machine: h...