From what I found, there aren't many mice that do have these Kailh switches. And the ones I did try I didn't find to be very good mice unfortunately. Hence why I resorted to replacing switches in my existing mice. My modified G305 is still doing well. The buttons are just a little too easy to press...

Hi, I have read this very interesting and useful discussion, I currently have a G602, unfortunately the scroll wheel no longer works, I would like to buy a silent wireless mouse with good build quality, I am looking for a sturdy mouse that will last me for years, I don't want spend too much if it is...

in particular quest_for_silence you helped me with translation into English When and where? Maybe "indirectly"? Please pay attention to details like this, sometimes they may cause some misunderstandings. At any rate, I will comment your last post by PM. I meant to write in Italian I've helped you u...

First thank you all for the availability you were very kind, and I thank you in particular quest_for_silence you helped me with translation into English I wanted to clarify that they are not naive, otherwise I would not have done all these questions are very meticulous and I like to do things right,...

After I read your post, so I should be satisfied to reach 65 degrees at full-load, we hope to succeed, 750 rpm at this point seem to me a few full-load, then the Phanteks can help me achieve a lower temperature, mode I think it's fanless heatsink pontente more macho ? even if it costs 80 euros, I do...

Italiano Ti ringrazio per la lunga spiegazione, magari fossero tutte così le risposte nei forum ,davvero bravo , ti faccio i complimenti ,sei molto preparato e non lasci niente al caso ,studi tutto nei minimi particolari ,a me è cosi che piace lavorare . Riguardo il Fan Expert forse mi permette di i...

However the important thing is not to exceed 55 degrees at full-load. People are weird about temperatures. I don't want to be insulting but are you kidding? It's hard enough to do that with slow fans! The only way to accomplish that goal without watercooling or fans is: -to use a weak low-power CPU...

Thanks again for your explanations Yes, and true, the mobo costs around 40 euros more than the gigabytes, I got mixed with the L-V model that does not have the Expert Fan That means it works with the percentage of the cycle ? The fans then increase according to the load and heat ? Then we go for exa...

To get Fan Xpert 2 you need the Asus P8Z77-V, from sources such as http://www.prokoo.com/asus-1155-p8z77v-z77atxddr3vga-p-50172.html . The P8Z77-V LE and P8Z77-V LX models do not have Fan Xpert 2. Using Fan Xpert 2 with 3 pin fans you can run the fans as slow as their starting voltage. It is possib...

@MikeC , @quest_for_silence The Asus V-P8Z77 think is this: http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77V/, in the list of online stores but which is which right ? http://www.trovaprezzi.it/categoria.aspx?libera=P8Z77-V+&id=29&prezzomin=&prezzomax = I discarded the Asus V-P8Z77 only a m...

Thank you so much you have been very kind, the list of components is just what we wanted. Regarding the CR-95C NoFan is really too expensive, 100 euros for a heat sink are so many, I prefer to stay on the Thermalright HR-02 macho. As for the continuous case a little research, I see if I find somethi...

I can't vouch for the newer models but the single-platter Hitachi 5K500.B were very quiet and reliably so (I've handled a bunch). I haven't stumbled on better 5400rpm 2.5'' drives so far. Thanks so much for the availability, quest_for_silence, I advised the version HTE, the models found in Italy ar...

@MikeC Thanks so much for the availability It is true that, without testing it is impossible to have the answers. Just about the Antec 2 is the only one of the soundproof cabinet that has external 5.25 bay, so I can put on the panel VDF, the cabinet as a Antec P183 and fratacal have the bay behind t...

Which cabinet do you recommend in particular ? Which model ? There are several ones, i.e. you don't need any particular one providing you won't run fanless or encoding all night long. In practice it is impossible to operate a PC without Fan. At this point considering a system with two fans at 500 r...

HFat @, @ quest_for_silence First of all thank you for the availability I assess the situation: ITALIANO : @HFat ,@quest_for_silence .Il problema è questo ,come mi avete già spiegato ,due ventole anche a 500 - 600 rpm si sentono sempre ,quindi anche se la notte non faccio conversioni video ,affinchè...

In this case there's no reason for a mechanical drive to be there at all imo. As you pointed out earlier, an all-in-one solution will not be silent. For the operating system I intend to use an SSD 64 GB: http://www.crucial.com/eu/store/ssd.aspx Regarding the mechanical hard drive, temporarily purch...

@Vicotnik , @HFat You to turn off the PC automatically there are various software for the TV is not a problem, I set the timer and turns off after 60 minutes The TV and DVDR unfortunately does not have DLNA devices. To use the PC as a NAS I mean this, place the hard drive in an 'other room, for' ex...

The computer and TV are in the same room, the films I watch them it just me, before I sleep I used to watch a movie, so while I sleep sel remains on the PC makes noise and wakes me up. Currently use to watch movies DVD RECORDER HD, has a 250 GB hard drive, half the film are almost always asleep, aft...

@HFat , @lodestar Thanks so much for the availability Yes I agree with you, unfortunately you can not have a PC at the same time fresh and powerful, I must go down to force a compromise. At this point from what you tell me you have two possibilities, I have a quad-core i5 with an underclocked, or a...

So is it really worth the trouble to make a desktop computer inaudible even when you're trying to sleep? If I'm not wrong, I think he would like to leave his PC on encoding (or another time-consuming task) all night long. I'm not used to do that, but maybe it could prove a bit challenging to achiev...

@quest_for_silence First of all thank you for the very detailed explanations and availability you have been very kind. Excuse me if I answer a little late. I answer them in order, I state that I currently have a satellite receiver, which records in TS format, in turn, the PC I run different video c...

Mikec Sorry, I translate your post into English and can read all give me advice.

Grazie mille per i consigli ,parlare in italiano è un sollievo Sono un pò spiazzato ,nel senso che sono al punto di partenza , mi spiegavi che due ventole a 500 rpm si sentono comunque ,a questo punto come posso risolvere ? I componenti meccanici che fanno rumore in un pc sono l'alimentatore le vent...

Thanks for the advice, very nice, mobo, Asus P8Z77 is great, but I said that asus will produce more heat, I do not know if you get there with the budget, in fact I'm thinking you replace the CPU with an i3, at least it is more fresh. Regarding the fans, the problem is that the Noctua NF-P12 PWM even...

@MikeC ,@Falkon Thanks for the answers, you were very kind Excuse me for the 'English, the case is the cabinet of the PC: http://www.silentpcreview.com/article75-page5.html The exact components of the PC are these: PSU: Seasonic x460 Mobo: GA-Z68X-UD3H-B3 CPU: i5 Sandy Bridge Hard disk: Crucial M4 C...

Hi, I confirmed for the choice of homes ? What is the most ventilated houses and silent absolute ?

With two fans at 500 rpm, I would not risk burning components.

Thanks so much for the availability and explanations @m0002a , @ces, @Vicotnik I have no idea what the noise floor of my room, I have no instruments to make measurements, unfortunately I can give you some data. I live in a country, the night with the windows closed I can not hear any noise coming fr...

Thanks so much for the availability, and kuzzia mikec It is true, the Thermalright Macho has a fan running at 900-1300, but I intend to keep it off, I turn to the limit at low rpm only in case of emergency In the PC I want to keep only two NOISEBLOCKER m s2 12 to 500 rpm, placed on the case Actually...

Thank you for having responded to me, you were very kind I thought the goal of 9 -10 dB even at 10-20 cm, the distance between me and the computer while sitting in a desk. I read on the forum that the human ear can not hear anything below 10 decibels, so if your PC is inudubile, we are pretty much i...

Hello hello to all forum Sorry but I do not speak English, I'm using google translator My intention is to make a pc inaudible to 'human ear, the PC must be inaudible even when fully loaded, must under no circumstances exceed the threshold of 9 dB, under 9-10 Deibel, the' man who can not hear anythin...