http://www.overclockers.co.uk/productli ... y=priceAsc

Anybody heard of these?

nope, both ide and power cables were unplugged

:( So spent all of last evening doing the tedious task of swapping out my old Socket-A setup for my new 3000+ Venice/MSI K8N Neo2/XP90 combo. I also took out the drive cage to replace my 160G Barracuda that developed bad sectors (I hope my 5 year warranty covers this) with my new Barracuda 200G. I'm...

I just made the move from a sonata to a P180 and it was well worth it. I have clocked my cpu 300mhz higher, and with everything on low, I get the same temps whilst playing WoW as I did when I was just idling in my sonata at 300mhz slower, AND this is now virtually inaudible!! If I turn all the fans ...

Did the changeover today, and I am seriously impressed. I have a Globe 120mm as rear fan, panaflo 92mm on my SP97, tricool jobby on the top blow-hole but set to low and a panaflo 120x38mm in the psu chamber. These are hooked up to my fan controller, Globe, Panaflo, and the tricool/38m panaflo are li...

i have just realised, the only real prob i can see with the 3000B is that, as it has a cover for the DVD drives, you cant isolate the PSU and have a front intake duct:(:(, unless you keep the cover open when the PC is on, but then that kinda defeats the point of the cover! I have a fresh air duct u...

The L1A in my SS400W rev2 works a treat, quietest fan in my system bar my arctic silencer rev 2

silenx lie I have 2x 120mm fans and 1x 92mm (total waste of £48 ) there are no where near 14dba @ 12V, and dont push enough air when undervolted. My 92mm panaflo is much smoother at lower voltages than the silenx and seems to push more air the nexus 120mm will be as quiet at possible at 12V (only £1...

Search brought up nothing about these fans I found on http://www.whispertec.com/Fan120.html

Look rather optimistic for double bearing fans, but only if *dreams on*

Anyone had any experiences?

My 420W Hiper went kablooey yesterday in my media machine (luckily nothing else is damaged) and I guess I need a nice new quiet psu. The machine is well weak: Duron 1.2Ghz 3x256MB PC133 RAM Geforce Ti500 64MB + zalman passive 80G Seagate 7200.7 in silentdrive Sharkoon heatsink for cpu with is actual...

Hi I've been planning an upgrade soon, A64 and all that jazz, and was set on getting myself an Enermax Noisetaker 470W, but I then read about some issues with dual 12V rail psu's and A64 systems. see here: http://msihq.designlab.info/thread.php?threadid=65607&hilight=noisetaker Should any of this be...

Lets say you had a fan controller that did 12v-7v. What effect would you say having a fan at 7v would be? I doubt its as easy as saying half the cfm and dba, effectively doubling the quietness but halfing the cooling? To elaborate, say I was giving fans percentage figures for cooling and quietness a...

my panaflo's run fine on my vantec nexus controlle

holy crap!!!

these globes are amazing!!!

unbelievably quiet for the amount of cfm they push at 5v
woohoo!

yet another thank you to you wonderful folks

Could someone explain in details (mebbe even pics) on how to short the thermosistor on the globes?

I need to do this when I get home to hook it up to my fancontroller and am not to sure how

why not go with an evercase 4252?

one with 120mm mounts, side cpu duct and firewire support is about £54 delivered to UK mainland

www.evercase.co.uk

you'll need to email em or phone for more details

never mind, turns out I had left my CAS 2.5 rated ram at 2 after a fiddle and that caused it, system now managed 10 minutes of toast.exe and prime at the same time

Hi I have a SS400 that I have modded with a L1A and widened the intake vents and provide a fresh air duct for that runs cooly and quietly. Everything has been fine in my system up until this past week. I added a 2nd 160G ide seagate to the mix, and on thursday evening, got a random restart whilst ru...

I used to overclock my mobile 2500+ to 2.42Ghz, but this was at 1.725Vcore, 2.8Vdimm and 1.7V on the chipset

This generated too much heat to operate silently, idling at 50ºC

Now running at 2.2Ghz 1.6Vcore, 2.6Vdimm and 1.6V on chipset, alot quieter and idling 42ºC

apparetnly then globe is the way to go

oops, right you are, I think i was compairng the prices of globes

nope, buying from there to the uk works out to about £3-4 more expensive than uk stockists

yes, I meant the 4252, sorry

I saw someone in another thread say that he need 2 120mm fans for his 4252, is there a variant that has a 120mm intake as well? or is he wrong?

Right, 2x nexus 120mm from koolnquiet come to a total of £35 delivered.

I can get 2x globe 120mm for £26 delivered

from which netherlands store did you order your nexus's?

Right, I have found 1 stockist of Globe Fan 120 mm S1202512L-3M

2 of them delivered to mainland britain comes to £26, are these the correct models and are they a decent price?

cheers

how do you mean?

I have a fan controller, what kinda modding is needed?

does anyone know any globe 120mm stockists in the UK?

Dorothy is gonna be getting some of these in soon and I was wondering if anyone has had any experience with em...

61cfm @ 25dba and they have NMB bearings, not the fluid bearings

at £14.99 they are a bit steep, but they are 25mm thick, so would fit in front mount of BQE

I read on the UK site for evercase that the 4254 can have a 120mm rear fan mount requested. has anyone who has got one from them able to confirm that? and how much did the case cost inc p&p? I think it might be a worthy upgrade from my sonata (looking for 4 external 3.5 abys so I can get a nice hdd ...

I initially started as I wanted to be able to leave my machine on overnight whilst I slept, and it's snowballed from there. I am shocked how much a quieter computer has improved my general enjoyment of pc use, I have been using pc's since I was 6, so 16 years now, and I have had a fascination with t...