I'm planning to use the 750 with a Gigabyte P55A-UD3P. I'll need a heatsink that will be compatible with the mobo. Next, it'll need to be able to have a good performance/cost ratio. I will most likely use a 120mm fan at the lowest settings. Which heatsink should I get? Yes, I'm definitely going to o...

What's a good value hsf for this videocard? Is the AC S1 good? Easy to install? Any instructions on how to remove the stock cooler on the Geforce 9800GT?

If it has nVidia's reference cooler then its stock. You can easily confirm by verifying your cards cooler into stock nVidia models. Hi, I'm not sure if I understand you there. Can you look into this for me? I can't tell by looking at the card. Here's a picture of the card: http://www.bfgtech.com/bf...

I just got the BFG 9800 OC+. Does anyone here know if the card is using a reference design? I intend to replace the stock HSF with a thermalright HR-03GT. I'm afraid there might be compatibility issues if it doesn't use the reference design.

Will the AC S1 fit the Palit Radeon 4850? That card doesn't use a reference design and I'm afraid it won't fit.

Which LCD mount are you using? Also, how did you manage to get your fans to hang like that? I'm really impressed with how clean your setup looks.

Will this combination all fit together? Are there any other cheaper alternative to the Scythe Ninja that can use a 120mm fan?

Does anyone here know of a professional place that will paint the front faceplate black? I want to ensure that the colour of the faceplate will match the rest of the case. The only way to ensure this is for a professional dealer to do this. I just don't know where to start to search for one.

Devonavar wrote:A4 Neo HEs were released at the beginning of the year. You should be safe with anything past January 2006 (S0601...) IIRC.

The serial code won't mention January 2006, but if the number is greater than S0601, like S0602, then I should be ok?

I'm confused guys. When I go to buy this power supply, how can I ensure that I get a A4 without opening the box and check the serial number? If you're just buying the power supply, then the serial number and revision code is on the back of the retail box. If you're buying it preinstalled in a P150 ...

Is it possible to install a water cooling setup into the Antec Solo? Has anyone tried it yet?

I'm confused guys. When I go to buy this power supply, how can I ensure that I get a A4 without opening the box and check the serial number? If you're just buying the power supply, then the serial number and revision code is on the back of the retail box. If you're buying it preinstalled in a P150 ...

Noni wrote:Go for a Scythe Ninja then.

So no modifications are necessary? I can just attach the fan on and let it run?

Mari0-Br0s wrote:I have the same motherboard, and I use a Thermalright Ultra-120. I got a X2 4400+ oc @ FX-60 on it. Temperature is better than stock cooling/stock speed.

*Installed in P180.

viewtopic.php?t=35009

Did you have to modify the fan to get it to fit the heatsink?

Noni wrote:Scythe Ninja (new one uses stock retention plate), HR-01??

viewtopic.php?t=18368

I don't want to modify anything.

The motherboard is a DFI NF4 Ultra-d and it has a socket 939 CPU. I'm looking for a reasonably silent setup with a very mild oc. I have contemplated of getting the Thermalright XP 120, but there seems to be some issue pairing that up with the 120mm fan. Thanks.

Has anyone contemplated of getting the colour of the front face plate painted to black? I'm thinking of getting the Solo and get the silver face plate painted to match the rest of the case. However, I'm not sure how much that would cost.

I'm confused guys. When I go to buy this power supply, how can I ensure that I get a A4 without opening the box and check the serial number?

Is the front bezel made of aluminum or plastic? I don't really like the silver colour of the bezel. Is it possible to get the bezel professionally painted to the same black colour as the rest of the case? If the front bezel is made of aluminum then that can be a problem. When I use to use aluminum c...

http://www.coolermaster-usa.com/Products.aspx?pid=1222 Is this case any good? In one word, No. It looks nice, but its got very little going for it as far as silent computing goes. Hard drives seem to be mounted with hard plastic, which is not much better than just plain metal. Its an aluminum case ...

bump!

Sorry, I meant AS 5. Um, so there is no difference in removing the components later right? Like if I use AS 5 or Ceramique with RAM heatsinks, both product won't make it impossible to remove?

So the easiest solution would be to buy a panaflo fan since I wouldn't need to modify it to use it?

I have the Arctic Silver 3, but people tend to use the Ceramique. Why would I want to use Ceramique instead of the Arctic Silver 3? I remember reading something about Arctic Silver 3 will permanately the item that is being used on it. For example, if I use arctic silver 3 on the memory chips of the ...

According to the SPCR Review, it can't. Is this right? Or I need to modify the fan in order for it to fit? Btw, I have the orange Nexus 120mm fan if that helps.

http://www.coolermaster-usa.com/Products.aspx?pid=1222

Is this case any good?

How do I ensure that if I do buy the NeoHE 430W that I'm getting the latest revision? There aren't any known issues with the DFI NF4 Ultra-d right?

Anyone here planning to use this case for water cooling?

If so, was it hard to install? I understand that there isn't much room in a P150. Any pictures? Thanks!

Sorry for being anal or anything, but this isn't completely black. IMO, the silver is destroyed what could have been the ultimate case.