This is the PSU I have been waiting for. Can't wait to get my hands on one!

Mike - has Seasonic provided a sample, yet...or is one expected sometime soon? :D An early pre-production sample of the 750W model but I am under NDA to stay mum. I've been told retail samples will be here by the end of the month. It is very impressive, clever technology and robust build. Helllllll...

Any new word on these new gold certified Seasonic PSUs?

I'll never buy another Enermax PSU again

Could I just buy 2 Y splitters and plug one of them into the other splitter? That would leave me 3 outlets for my 3 slipstream fans

Then I could connect the end to a Zalman Fanmate 2 and control all 3 Slipstreams with it

Does there exist such a thing as a 3pin 3 way splitter cable?

You know how they have 2 way Y splitter cables for 3 pin fans

Do they have a 3 way splitter cable for 3 pin fans?

If so, have a link? I can't find one for sale

My X58 board has 4 headers that are controllable by bios, and I only have 3 Slipstreams so I'm good there. I was thinking of getting three Zalman RC56 (7V) Noiseless Resistor Cables just to ensure that they are running around 890RPM according to the SPCR review. 7V is the sweet spot for the 1200RPM ...

I wanted to see the RPMs to make sure it was running at around 800RPMs through bios

I have 3 1200RPM Scythe Slipstream case fans hooked up to the CPU, CHASSIS, and PWR fan headers on my EVGA X58 SLI LE motherboard so that I can control them with the bios. My problem is, why does the bios stop telling me what RPM they are running at once they go under 1000RPM? I can set the manual s...

Can the RPM be set in the BIOS of a motherboard to control fans?

Be careful plugging in multiple fans into a single header. Most mobo fan headers max out around 1amp, though some go higher. If you exceed the capacity of that header, you will blow it. You can always splice the 4-pin molex wires together or get a couple molex splitters. I don't know how to splice ...

I can't daisy chain them with the 4 pin power connectors they come with.

Am I going to need 3 pin Y shaped cable extenders?

Wait for the new Seasonic 80Plus Gold certified PSUs

The fans in them aren't supposed to even turn on under 20% load.

I'll be switching out my noise Modu82+ 625 with one when they come out.

Yeah it's ridiculous

Has anyone ever needed to relubricate an S-FLEX? Or is that even possible because of the fluid motor?

Arrrrgh why all this talk of Slipstreams needing to be re-lubricated? I was going to buy some, but now I'm not so sure.

Do the slipstreams really push more air at a given RPM than any other case fan?

I plan on replacing my noisey 625 Modu82+ with a Seasonic X750KM :) I can't wait to have a high quality PSU again! Noisy Modu82+? I must have missed something, is yours defective? BTW, 750W PSU is absurd unless you're running tri/quad sli/crossfire. This is my second 625 Modu82+ in a year, the firs...

I've never heard of Slipstreams having to be manually oiled? What?

Should I get SFlex instead?

"...a decently high CFM case fan that is still reasonably quiet?' http://xbitlabs.com/articles/coolers/display/120-140-fans-roundup_28.html#sect0 "...where can I get rubber case fan mounting grommets to reduce vibration?" http://216.139.228.207/Anti-Vibration-Products-C57.aspx?UserID=6273351&Sessio...

The stock fans my case came with are much too noisy at anything above 5V.

I'm going to go with the 1200 Slipstreams and some silicon mounting plugs.

Why does no one talk about the Scythe Gentle Typhoon fans? Did they end up not being as good as the Slipstreams?

I'm running my Heatsink FDB fan at the full 1600rpm and I have a GTX285 with the stock fan, so my tolerance for noise is a littler higher than the standard SPCRian, but I still have my limit :) Thank you for the advice, it looks like I will go with the Scythe Slipstream 1200rpms and try them at full...

Hey Guys I want to replace the stock fans that came with my case, they are running at 5V atm and don't generate nearly enough airflow. What recommendation would you give for a decently high CFM case fan that is still reasonably quiet? (as a reference, I consider my Thermalright 1600RPM FDB fan runni...

I'm running a Core i7 920 OCed to 4.0 GHz using a Megahalems with a Thermalright 1600rpm FDB fan at 12v and Arctic Silver 5, running my Corsair Dominator 1600 RAM at 1.65v Case is a Lian Li PC-X500 which is a closed case for the most part except for some slit vents on the front. Has two 120mm case f...

The FrozenCPU 88 thermal compound roundup found AS5 to be on of the top five A+ TIMs, still after all this time.

I tried other TIMs like IC Diamond and Thermalright Chill Factor, but ended up going back to my trusty AS5.

Any new updates on these amazing power supplies?

When I do the bead in the center of the CPU, do I have to wait 10-15 mins for it to cure? Or were those the old instructions for IC7?

I plan on replacing my noisey 625 Modu82+ with a Seasonic X750KM I can't wait to have a high quality PSU again!

Why no recommendations for Scythe Gentle Typhoon?

Hi Kuba

This same problem happened to me with my Modu82+ 625, I had to RMA it.

Recently the fan is making noise again and my Modu82 buzzes loudly constantly now.

I will never buy an Enermax again after this. I should of stuck with Seasonic. :/