A build i think is good enough to post on SPCR
"THE PARTS"
MotherBoard: ABIT KN9 ULTRA
CPU: AMD64 3800+ X2 (2.0 Stock, But did have it OCed to 2.7 untill i rest cmos)
Memory: 1GB Corsair XMS2 DDR2 800
Video Card: EVGA 8800GTS (320mb)
Hard Drives: (2) maxtor 40GB
HeatSink: ThermalTake TMG A1 (with fan rmoved)
PSU: Enermax Liberty 400W
Rear Fan: ThermalTake SmartFan 2 (i know i know.. not the best fan)
Fan Blowing on Video Card: Modded Antec Tri-Cool (switch cut off and replace with a thermal probe thingy)
once i oc the cpu again it will be at a vista score of 5.3ish and i am saving up for another GB of memory and comments or insults are welcom
[Mod: fixed image links]
New Build in P180
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 346
- Joined: Tue Dec 12, 2006 5:09 pm
- Location: U.S.A. Massuchusetts...... *Folding For SPCR*
- Contact:
New Build in P180
Last edited by PopCorn on Sat Mar 10, 2007 4:28 pm, edited 4 times in total.
-
- Posts: 259
- Joined: Mon Jun 26, 2006 4:58 pm
- Location: Markham, Canada
Looks like a pretty solid rig. How does the new Thermaltake A1 perform?
Any temp data?
What have you done with the original Antec tri-cools?
It looks like you have zip-tied the smart fan 2 to a 12cm fan frame - Is that from the Antec tricool?
Here is a pic of what I did to mount my 90mm Tt Smart Fan 2 (Hong Sheng) fan.
I used 4 Zip-ties from a Pound shop to mount the fan in position with foamy draught excluder material between the fan and the case.
Any temp data?
What have you done with the original Antec tri-cools?
It looks like you have zip-tied the smart fan 2 to a 12cm fan frame - Is that from the Antec tricool?
Here is a pic of what I did to mount my 90mm Tt Smart Fan 2 (Hong Sheng) fan.
I used 4 Zip-ties from a Pound shop to mount the fan in position with foamy draught excluder material between the fan and the case.
-
- Posts: 346
- Joined: Tue Dec 12, 2006 5:09 pm
- Location: U.S.A. Massuchusetts...... *Folding For SPCR*
- Contact:
the A1 performs amazingly.. i can run the upper body of the p180 without any fans but i dont feal safe with out any fans...
http://s157.photobucket.com/albums/t71/ ... ure212.jpg
thats speedfan right now on idle... the temps are -3C compaired to bios to add 3C to that and it goes up 3C on load
out of all the old tri-cools the one thats blowing on the video card is the only one left(wich i modded with a sensor) ... the body that the thermaltake is attached to (is just used to get the fan away from the fan grill) is another tri-cool and i forget what hapend to the last one... ( i problily threw it across the room at disappointment at how loud it was (made my ears ring))
see the image thingy doesnt work
http://s157.photobucket.com/albums/t71/ ... ure212.jpg
thats speedfan right now on idle... the temps are -3C compaired to bios to add 3C to that and it goes up 3C on load
out of all the old tri-cools the one thats blowing on the video card is the only one left(wich i modded with a sensor) ... the body that the thermaltake is attached to (is just used to get the fan away from the fan grill) is another tri-cool and i forget what hapend to the last one... ( i problily threw it across the room at disappointment at how loud it was (made my ears ring))
see the image thingy doesnt work
The image thingy isn't working because you're not entering the correct URL for your pictures. If you look at your photobucket page, it's got the URL's listed. For instance, the one you tried should've been:
And that gives you:
Code: Select all
[img]http://i157.photobucket.com/albums/t71/SilentSetup/Capture212.jpg[/img]