Page 2 of 3

Posted: Thu May 22, 2008 1:11 pm
by oxygen200000
The dark side of the force :D... Hurrrr!!!

Terrifying image of the backside of my mobo tray...

Image

Posted: Mon May 26, 2008 1:03 am
by AckeDman
Still... im very fucking impressed. I wonder why there isnt a company that hires people like YOU to build the PCs they are selling. Then and only then you get your moneys worth.

Ive seen some pretty amazing builds in here and yours is definitly one of the top 3-4.

more and more people want quiet builds and i really belive there is a market out there for PCs that are quiet from the start.

With all the fucking time ive put into trying diffrent stuff i definitly would have payed someone like you 100-200$ to do everything. It would be worth it in the end.

Posted: Mon May 26, 2008 8:12 am
by Moogles
The backside of your mobo tray looks much, much better than the inside of my case. :( I'm deeply ashamed.

:D

Posted: Wed Jul 09, 2008 9:51 am
by oxygen200000
Summertime Temp's:
Image
Still almost fanless :D

Posted: Wed Jul 09, 2008 9:23 pm
by alphabetbackward
What did you use to cut the motherboard tray?

Posted: Thu Jul 10, 2008 12:48 am
by oxygen200000
I had used an Angle grinder. Something like that: http://ocs.skileurope.com/skilocs-defau ... rod_id=524

The cuts are not that clean because I'm not very skilled, but the holes are covered with material so nobody cant se the ugly cuts

Posted: Sat Sep 06, 2008 4:49 am
by oxygen200000
A new graphic card had rise in my rig... Meet the new Sapphire ATI Radeon 4850 1GB
Soon new pics available :D
Temps:

1. After 5 min ATiTool (fanless)
Image

2. After another 30 min (side fan @1300 RPM)
Image

3. Back to IDLE
Image


4. Full load before Accelero S1
Image

Posted: Mon Oct 13, 2008 6:04 am
by oxygen200000
Some changes...
Yesterday I completely disassembled my system ...
I replaced in some places Paxmate with AcoustiPack ...
I removed the dust ...
I made holes in the bottom of the case, and I attached a set of wheels LianLi WB-01 ...
I put a pair of cold cathode Vantec NXP-301 ...
I rebuilt the WM
Image Image Image Image Image Image Image Image Image Image Image

Posted: Mon Oct 13, 2008 8:58 am
by bozar
Still amazing, how quiet is it?

Posted: Mon Oct 13, 2008 11:29 am
by Gojira-X
aburgard wrote:I've often wondered why there isn't just a lattice work of metal behind the mobo. It'd cover all of your mounting locations and add a lot of space for wire management or heat dissipation.

I'm sure it'd cost more to produce... but whatever.
Its a trade-off, two much material taken off the mobo tray and it won't be stiff enough to do its job of supporting the motherboard and components fixed to it, conversly take to little off and it could make the computer harder/more expensive to produce.

From what I rememeber from the my Chinese lecturer who was trying to teach me how how to model stresses in plate strutures (like cars and stuff), there is lots of complicated maths to modeling a plate with loads in 3 dimensions.

An example of a case maker taking a little two much material off the backside of the mobo tray are the Korean JNC 4JA series of cases from 2000-2003. JNC took a little two much off the backside and as a result, the cases cause the motherboards to warp slightly. This is wasn't an issue with older hardware, but the heavier heatsinks that started to aprear in 2004, brought the problem to light.

JNC don't support the 2JA, 3JA, 4JA and 5JA series cases (mainly as they are dicontinued).

Posted: Wed Oct 15, 2008 5:06 pm
by FuturePastNow
Beautiful machine, well done.

There's no fan on that Accelero S1, is there?

Posted: Thu Oct 23, 2008 12:29 am
by oxygen200000
Nope... For the moment I keep it fanless.

Posted: Thu Oct 23, 2008 12:50 am
by frenchie
Great job !!!

Except now I want to improve my cabling.... again... :D

Posted: Thu Oct 23, 2008 10:53 am
by bozar
oxygen200000 wrote:Nope... For the moment I keep it fanless.
How quiet is it, at what distance does it become totally silent?

Posted: Thu Oct 23, 2008 12:02 pm
by oxygen200000
During the day can't be heard, regardless of distance. In the night is completely silent from about 1m

Posted: Fri Oct 24, 2008 1:50 pm
by runep
Really neat job! I'm getting some AcoustiPack my self and I got a few new ideas from this setup that I will looking forward to apply on my own system.

Posted: Sat Sep 19, 2009 3:39 am
by oxygen200000
A little shooting... few photos after a cleanup.
Image
Image
Image
Image
Image
Image
Image

Posted: Sat Sep 19, 2009 6:19 am
by frenchie
I'm speechless every time I look at your computer... It's just perfect.

Posted: Sun Sep 20, 2009 7:35 am
by bozar
frenchie wrote:I'm speechless every time I look at your computer... It's just perfect.
I agree, it's hardware-porn.

The most beautiful build I've seen in my life.

Posted: Tue Oct 06, 2009 1:10 am
by davepermen
frenchie wrote:I'm speechless every time I look at your computer... It's just perfect.

not yet, to be perfect, he'd need a passive cooled psu, and ssds instead of disks. then it would be perfectly silent.. :)

but it looks pretty yet now :)

Posted: Sun Jan 17, 2010 2:07 am
by oxygen200000
Indeed but... I'm not feeling very comfortable with a fanless PSU and SSD are still quite expensive... Maybe I will swap the Seasonic fan with Noctua P12 but I'm still thinking about that...

Posted: Sun Jan 17, 2010 7:46 am
by diver
Nice build.

Posted: Mon Jan 18, 2010 11:54 am
by Yoshimitsu
I'm speechless too, such a clean build. Well done 8)

Posted: Sat Feb 27, 2010 12:39 am
by oxygen200000
This is The last state of the inside of my machine:)
Enjoy! :)
Image

Posted: Sat Feb 27, 2010 4:21 am
by bozar
Still beautiful build.....

Posted: Thu Mar 04, 2010 10:24 pm
by oxygen200000
I want to change my Ninja with an Cooler Master Z600. I hope to happen this month... An Asus Xonar D2 will be here Monday :D . New photos soon ;)

Posted: Sat May 15, 2010 4:40 am
by oxygen200000
I finally got a Noctua NH-D14. I took this instead Cooler Master Z600 I wonder why Noctua Nh-D14 is not yet reviewed on SPCR... It seams to be the best cooler on the market today... On all categories, high RPM, low RPM and FANLESS. Tommorrow I will probably instal it...

L.E. I did it today:D
Image
Image
Image
Image
Image

cpu and GFX temperatures

Posted: Mon May 17, 2010 8:28 am
by c.ruel
Really nice looking build. Just interested to know what temperatures you are getting on idle and load with passive cooling for cpu and GFX (it looks like your graphics card is passively cooled ... is it?). Also the rear fan is that intake or exhaust?

Posted: Thu May 20, 2010 11:05 pm
by oxygen200000
Yes, I keep the VGA fanless.
The rear fan is exhaust...

With FUR:
Image

With Orthos:
Image

Re: Enjoy the silence...

Posted: Thu Mar 03, 2011 12:48 am
by oxygen200000
New upgrade:
MSI HD6870 Twin Frozr II
Pics next week.