My (not so) quite rig CM 690

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
R2_
Posts: 47
Joined: Sun Aug 30, 2009 8:04 pm
Location: Brasil

My (not so) quite rig CM 690

Post by R2_ » Fri Oct 02, 2009 4:11 pm

So here is my rig:

Image

http://valid.canardpc.com/show_oc.php?id=740134

Cooler Master 690

Corsair HX620

AMD Phenom II X4 945 Processor

Asus M4A79T Deluxe (AMD 790FX)

ATI XFX Radeon HD 4850

OCZ Platinum 4096 MB (2x2GB) DDR3 Dual Channel

Now letz go to the building part:

Image

Now installing PSU:

Image

As you can see, i'v pass the cable through the hole BEFORE fixing the PSU screw, otherwise would be impossible.
Some might say that i'm over power with 620 W, however i plan to add more fans, and in the future do a CrossFireX.

Mainboard:

Image

Image

Now this AMD cooler is so ugly... I though it would be same as the black edition, but this one looks very cheap. I plan to change this, but there's this warranty thing...

And this is the final, with memory and VGA.

Image

Here you can see my cable management, not perfect but it's fairly good.

Image

The side panel fan seems to be the noisest one... Even been plugged to asus q-fan management.
The hottest part is over VGA and under CPU, at the north bridge.
So i might move this fan to the top and let it running 600 RPM, then add another exhaust fan to the side panel (instead of intake).
Last edited by R2_ on Fri Oct 02, 2009 5:49 pm, edited 1 time in total.
Thou shalt help those in need, or thou shalt suffer the same need

Kate
Posts: 194
Joined: Tue Dec 23, 2008 11:15 pm
Location: *-Home-*

Post by Kate » Fri Oct 02, 2009 4:53 pm

Parabens!
[color=red][size=17]Girls can wear jeans
And cut their hair short
Wear shirts and boots
cause its ok to be a boy
But for a boy to look like a girl is degrading
cause you think that being a girl is degrading
But secretly youd love to know what its like
Wouldnt you
What it feels like for a girl
[/size][/color]

lucas82
Posts: 88
Joined: Mon Jun 04, 2007 12:24 pm
Location: Santa Maria - Brasil

Post by lucas82 » Fri Oct 02, 2009 4:57 pm

Very nice, fellow brazilian!

bonestonne
Posts: 1839
Joined: Mon Feb 05, 2007 2:10 pm
Location: Northern New Jersey
Contact:

Post by bonestonne » Sat Oct 03, 2009 6:17 am

I would suggest chaning the exhaust fan, CPU heatsink, and taking out the side panel fan. It serves no goo purpose, and if you block off the vents, you may see better temps.
|Dual Intel Xeon E5-2680v2--Xigmatek SD1283 DK-II|Asus Z9PA-D8--HR-05 IFX|128gb DDR3-1600 ECC RDIMM|300gb DC SSD, 640gb, 1TB, 2TB HDDs|nVidia GTX660ti 2GB|Antec HCG-750|NZXT Source 210 Elite|M-Audio ProFire 2626|Art TubeOpto8 with Smooth Plate Tube Swap|Avid Artist Mix x2|
FartingBob wrote:A 9500GT with 1GB of RAM is the most pointless thing since NASCAR.

R2_
Posts: 47
Joined: Sun Aug 30, 2009 8:04 pm
Location: Brasil

Post by R2_ » Sat Oct 03, 2009 7:44 am

I see your point, thats holes could be 'leaking' air from a best-performance flow.

But the problem with CPU heatsink is that i would loose my warranty from AMD :( Not to say they are really expensive.

I wonder how effective are this software that controls fan speed, and there's also the limitation of 3 connectors on the mainboard.
Thats why i can't wait to get my hands on a noctua that would run full speed without that much noise.
Thou shalt help those in need, or thou shalt suffer the same need

Post Reply