Water cooled P182 quite

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
spartan117
Posts: 28
Joined: Fri Aug 14, 2009 9:14 am
Location: UK

Water cooled P182 quite

Post by spartan117 » Sun Jan 31, 2010 3:08 am

Hi finally got around taking some pictures of my rig, here's the spec list

Case: P182
Fans: 4 Noctua <600Rpm, 1 Scythe slip/stream 5V
CPU: Q6600 G0 2.4Ghz
GPU: XFX 8800GTS 320MB
Water cooler: Zalman reserator XT "Volt modded"
Ram: GSkill 6GB DDR2
OS hdd: 80Gb Intel xm25m
Files hdd: 1Tb WD green
Programs hdd: 250Gb Seagate
PSU: Corsair Hx520
OS: Windows 7 Professional
Screens:Dell 2407, LG Flatron 17"

Ive opened up my reserator and fitted a 8V resister, now the dam Zalman reserator is quite ^^ and as can see from my temps they didnt take a knock with coolant ideling at 7C above ambient room temp.

Ambient room: 21C "roughly"
Coolant temp: 28C
CPU: 34-34-37-39C
GPU: 45C
Temps recorded after 2 hours.

This is running the zalman at min speed ^^

Image
Coolant temps pic :)


Image
My desk + wii + acer aspire one D250

Image
Internals

Image
Close up internals

Ive used cable ties on the tubing where it connects to the cpu water block to prevent any kinks as the tubing is'nt the Zalman stuff so was a royal pain to work with, soak in hot water then quickly push it on and cable ties to secure :P

If anyone got a spare dell 24" 2407 i'll gladly take it off ur hands for free ;) hehe replace my ugly LG screen :P
P182, Q6600 G0 2.4Ghz, XFX 8800GTS 320MB, Zalman reserator XT, 6GB DDR2, 1Tb WD green, 250Gb Seagate, 80Gb Intel xm25m,Corsair Hx520, Windows 7 Professional, Dell 2407, LG Flatron 17"

danimal
Posts: 734
Joined: Mon Jun 08, 2009 2:41 pm
Location: the ether

Post by danimal » Tue Feb 02, 2010 12:15 am

that looks like a clean build!

have you run any overclocking heat tests

spartan117
Posts: 28
Joined: Fri Aug 14, 2009 9:14 am
Location: UK

Post by spartan117 » Tue Feb 02, 2010 10:42 am

I did run the cpu at 3Ghz simply pushing up the FSB but resulted in temps that I think are too high specially when running at 100% load at periods over 10 hours hit around 70C as i can remember on cpu and 65 ish on gpu. 2.4Ghz is enough for me :)
P182, Q6600 G0 2.4Ghz, XFX 8800GTS 320MB, Zalman reserator XT, 6GB DDR2, 1Tb WD green, 250Gb Seagate, 80Gb Intel xm25m,Corsair Hx520, Windows 7 Professional, Dell 2407, LG Flatron 17"

Post Reply