Any fan controllers that fit inside the SLK3700AMB ?

Lord09 · Post by **Lord09** » Fri Feb 06, 2004 2:33 am

I've tried the Zalman and Vantec controllers but both protrude too much for the front door to close properly.

Anyone have any epxerience with a controller that'll fit?

Thanks...

clive · Post by **clive** » Fri Feb 06, 2004 3:23 am

I just installed the Zalman MFC1 in my 300AMB - it was a bit tricky. What I found was that with the rails connected it stuck out too far and the rails also did not remain parallele. So I pushed the rails past the restraint and made a spacer from balsa to keep tension on the rails. It now sits jsut behind the drive bay covers and is perfect fit.

cosmo3 · Post by **cosmo3** » Fri Feb 06, 2004 5:24 am

I have a Sunbeam controller and it fits fine without any modification at all. I put it between my 2 Cds and when you mount it to the rails it sits in about 3 or 4mm fron the front bezel of the cds but the cd bezel is deeper than that so it works out fine. Sunbeam controllers work great and you can turn off fans if you like.