Q: Will the Thermalright Ultra-120 Extreme fit in a SOLO? (blowing back)
I see someone's used the original Ultra-120 in the General Gallery but see no mention of Extreme's compatability.
Question about SOLO.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
- Posts: 153
- Joined: Sat Jan 13, 2007 10:14 pm
- Location: Vancouver
- Contact:
-
- Posts: 153
- Joined: Sat Jan 13, 2007 10:14 pm
- Location: Vancouver
- Contact:
Hi there!
I have similar question for Antec Solo.
I have Asus P4P800-E Deluxe motherboard, S478 slot CPU, and I'm thinking to buy a Thermalright XP-120 (S478) CPU cooler or a Zalman CNPS7700 cooler.
Will these CPU coolers fit in the Antec Solo?
More exactly, maybe could anybody measure the vertical distance between the upper motherboard screw line (screws which holds the motherboard) and the lower edge of the PSU?
(My current Asus Ta-982 case have 18mm for this distance.)
Thanks really!
I have similar question for Antec Solo.
I have Asus P4P800-E Deluxe motherboard, S478 slot CPU, and I'm thinking to buy a Thermalright XP-120 (S478) CPU cooler or a Zalman CNPS7700 cooler.
Will these CPU coolers fit in the Antec Solo?
More exactly, maybe could anybody measure the vertical distance between the upper motherboard screw line (screws which holds the motherboard) and the lower edge of the PSU?
(My current Asus Ta-982 case have 18mm for this distance.)
Thanks really!
Thanks you indeed! That's promising!Tzupy wrote:@batka: the XP-120 and 7700 are both low profile coolers by comparison, they'll fit in a Solo with plenty of room above.
I have the SI-128 (much taller than XP-120) with Nexus fan in P150 and there's enough room till the case panel.
BTW I ment the space between the CPU cooler and the PSU , not between the CPU cooler and the case side panel, just for clearing up it more.