More P182 measurements

[Asulc]

how tall and wide is the psu cage, and how much room is there from the back of the case to the fan in the lower part?

[Lou_H]

how tall and wide is the psu cage

The cage has about a 1mm layer of silicone rubber on the inside and it fits snug on a standard size PSU. My Corsair HX620W is mounted in it and the size for it is:
5.9"(W) x 3.4"(H) X 5.9"(L)
150mm(W) x 86mm(H) x 150mm(L)

how much room is there from the back of the case to the fan in the lower part?

I moved my fan mounting devider toward the rear about 1 3/8" , but looking at the old rivet holes, I think the stock location would give 8 3/8 " from the case back to the fan.

[pingu666]

dont surpose you could measure the gap between the hd's in the bottom cage?

thinking of using the old koolance blocks to watercool the HD's in the bottom case, if i buy the case