looking for a tiny ITX case (27x7x20cm)

Enclosures and acoustic damping to help quiet them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar

Post Reply
charonme
Posts: 131
Joined: Tue Apr 11, 2006 4:17 am
Location: Slovakia

looking for a tiny ITX case (27x7x20cm)

Post by charonme » Tue Dec 27, 2011 10:02 pm

I'm looking for a tiny mini ITX case, approx. 27(W)x7(H)x20(D)cm (inside)
So far I found coolmaster elite 100 and apevia x-fit-100, but they're too deep
No need for a PSU

flemeister
Posts: 346
Joined: Mon Dec 28, 2009 1:42 am
Location: Australia

Re: looking for a tiny ITX case (27x7x20cm)

Post by flemeister » Tue Dec 27, 2011 10:54 pm

http://www.silentpcreview.com/antec-isk100

248mm (H) x 70mm (W) x 212mm (D)

Tibors
Patron of SPCR
Posts: 2674
Joined: Sun Jul 04, 2004 6:07 am
Location: Houten, The Netherlands, Europe

Re: looking for a tiny ITX case (27x7x20cm)

Post by Tibors » Wed Dec 28, 2011 6:35 pm

http://www.mini-itx.com/store/?c=3#p3804
60(H) x 230(W) x 205(D)(mm)
3) MSI RS480M2-IL | A64 3000+ | Freezer 64 | SS-301HT | 7200.7 PATA 40GB
5) Intel D525MW | Intel 320 40GB | Vertex II 180GB

charonme
Posts: 131
Joined: Tue Apr 11, 2006 4:17 am
Location: Slovakia

Re: looking for a tiny ITX case (27x7x20cm)

Post by charonme » Thu Dec 29, 2011 7:14 am

thanks, I already considered the antec, but it's too small (248mmmm < 27cm)
I also went thru all the cases listed on mini-itx.com and they are all either too big or too small, the only one I liked is the Morex

HFat
Posts: 1753
Joined: Thu Jul 03, 2008 4:27 am
Location: Switzerland

Re: looking for a tiny ITX case (27x7x20cm)

Post by HFat » Thu Dec 29, 2011 7:30 am

Somewhere on the forum I posted a link to a comparison of the 3310 and the 3320.

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

Re: looking for a tiny ITX case (27x7x20cm)

Post by Worker control » Thu Dec 29, 2011 12:08 pm

http://www.mini-box.com/M350-universal- ... -enclosure

The M350 is about as small as you can get while still containing a hard drive.

I recently built a system using this:
http://www.mini-box.com/KIT-M350-INTEL-DH61AG-19V-160W

together with an i3-2120T (stock cooler) and a Crucial m4.

Abula
Posts: 3613
Joined: Tue Nov 02, 2004 12:22 pm
Location: Guatemala

Re: looking for a tiny ITX case (27x7x20cm)

Post by Abula » Thu Dec 29, 2011 12:11 pm

Worker control wrote:http://www.mini-box.com/M350-universal- ... -enclosure

The M350 is about as small as you can get while still containing a hard drive.

I recently built a system using this:
http://www.mini-box.com/KIT-M350-INTEL-DH61AG-19V-160W

together with an i3-2120T (stock cooler) and a Crucial m4.
Hows your temps on idle n load? at the begging wanted to build on M350, but the lack of case fans worried me, so im really interested in your results.
GameMi - Intel i9 9900K + Gigabyte Z390 AM + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

Re: looking for a tiny ITX case (27x7x20cm)

Post by Worker control » Thu Dec 29, 2011 2:03 pm

Abula wrote:
Worker control wrote:http://www.mini-box.com/M350-universal- ... -enclosure

The M350 is about as small as you can get while still containing a hard drive.

I recently built a system using this:
http://www.mini-box.com/KIT-M350-INTEL-DH61AG-19V-160W

together with an i3-2120T (stock cooler) and a Crucial m4.
Hows your temps on idle n load? at the begging wanted to build on M350, but the lack of case fans worried me, so im really interested in your results.
Temps were fine, I don't remember exactly. I haven't had a chance yet to power it up in a quiet place, so I don't really know how the stock fan sounds. It's at least not terrible. Note that the 35W CPUs come with a stock cooler which is lower-profile than the rest of Intel's lineup.

Abula
Posts: 3613
Joined: Tue Nov 02, 2004 12:22 pm
Location: Guatemala

Re: looking for a tiny ITX case (27x7x20cm)

Post by Abula » Thu Dec 29, 2011 2:47 pm

Worker control wrote:Temps were fine, I don't remember exactly. I haven't had a chance yet to power it up in a quiet place, so I don't really know how the stock fan sounds. It's at least not terrible. Note that the 35W CPUs come with a stock cooler which is lower-profile than the rest of Intel's lineup.
Nice to hear about the temps, would be interesting to see, if you get a chance, temps on a sandy bridge i3 2120T to get a reference into what to expect in both idle/load, if they are good i might build on ivy bridge on M350
GameMi - Intel i9 9900K + Gigabyte Z390 AM + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris

charonme
Posts: 131
Joined: Tue Apr 11, 2006 4:17 am
Location: Slovakia

Re: looking for a tiny ITX case (27x7x20cm)

Post by charonme » Fri Dec 30, 2011 11:12 am

the case looks great, except I don't think I could fit a 3.5'' HDD, a full size low profile heatsink and at least one 10x10cm radial blower in it. That's why I need one of the dimensions to be at least 27cm

Post Reply