Page 1 of 1

SpeedFan questions?

Posted: Fri Feb 16, 2007 11:11 pm
by mouse
Ok, so I am using SpeedFan 4.31. By default, all temperatures were listed as "Temp 1", "Temp 2", etc. I believe I have correctly identified which temps are the CPU and HD, but I am unsure as to which is the Motherboard temp and what the others are. I'm not sure if anyone can tell me this from looking at the SpeedFan screens, but I thought it was worth a shot...

First, the home screen for SF: ... fanuv4.png

And second, the configuration screen: ... figtj5.png

Not sure if either of those gives any helpful information to help me determine which Temp goes with what or not... Or maybe they are listed in a standard order, and this will be easy? Thanks for any help! :D

Also, sorry if this is the wrong place for this post...I wasn't sure where to put it, so if an admin wants to move it that is fine!

Posted: Sat Feb 17, 2007 6:53 am
by J. Sparrow
Check the SpeedFan site, they carry ready-made configurations for many motherboards. Otherwise, get rid of those -1 °C readings. Also check for constant readings, take those out, too.

PS: those LM75 readings are likely duplicates of other sensors, uncheck them.

Posted: Sat Feb 17, 2007 7:23 am
by mouse
Thanks J. Sparrow! After trying out a couple different configs I got one that worked! Thanks again!