Nitrogon NT06-Lite Question

New to PC silencing? Read & post your questions here. Dedicated to rosy_toes.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
biased
Posts: 6
Joined: Wed Sep 05, 2007 1:58 pm

Nitrogon NT06-Lite Question

Post by biased » Wed Sep 05, 2007 2:03 pm

Hello I have just finished my first HTPC build and used silentpcreview as a reference point.

Case: Silverstone SG01
PSU: Antec Earthwatts 430w
Mobo: ABIT AN-M2
CPU: Athlon 64 3500 Socket AM2

The only complaint I have is the CPU fan/heatsink is stock and I've only replaced a heatsink/cpu on full ATX boards and that was years ago as I haven't upgraded in sometime and it came preinstalled w/ the fan (Volcano 6 Cu). What I'm wondering is with my setup can I just purchase this Nitrogon NT06-Lite without a fan and if not will a fan run into my psu?

Thanks

[F]bernZ
Posts: 163
Joined: Thu Jan 19, 2006 5:44 pm

Post by [F]bernZ » Wed Sep 05, 2007 5:28 pm

The NT-06 was designed specifically for the SG-01 Sugo to fit flush underneath (or near flush) the PSU's 120mm fan. It'll be fine.
[size=59]Intel Core 2 Duo E4400 @ 3.0GHz (300 * 10) w/ Scythe Ninja revB + SCURK1
Corsair XMS2 5400C4 @ 600 4-4-4-12
Abit IP35Pro
WD 2500AAKS
Pioneer 111-DVR
eVGA 7800GT w/ Accelero S1
Corsair 520HX
Lian Li A05B

Fans:
900RPM rear intake
900RPM front exhaust
600RPM CPU HS

Temperatures:
@1.8 (300*6) idle ~28-34
@3.0 (300*10)load ~54-62[/size]

Post Reply