Shuttle SD11G5 question

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Gohan
Posts: 36
Joined: Mon Jun 14, 2004 2:02 am

Shuttle SD11G5 question

Post by Gohan » Sat Dec 24, 2005 11:21 am

Hi, I have put an order in for this little lot.

Shuutle SD11GS
PM 1.83ghz
2gig DDR-2 PC4400
250gig Samsung HDD
& an X1600pro

My question is I have a couple of Zalman VF700-CU here, does anyone know it it would fit?

If not any other options for more silent VGA cooling in this rig?

Cheers, Ryan

Gohan
Posts: 36
Joined: Mon Jun 14, 2004 2:02 am

Post by Gohan » Tue Dec 27, 2005 2:07 am

Ok it seems that the Zalman won't fit :( and I can't undervolt the stock cooler enough without the temps getting too high.

Can anyone suggest a better singe slot cooler? or one that has some kind of heatpipe solution that will route the heat to the rear or the card?

I don’t mind loosing the PCI-E x1 slot but I will still need something compact as obviously the shuttle has some clearance issues.

teknerd
Posts: 378
Joined: Sat Nov 13, 2004 5:33 pm

Post by teknerd » Tue Dec 27, 2005 2:45 am

the aerocool vm-101 should fit
[img]http://tinyurl.com/rqlff[/img]
[size=75]Main Rig: X2-4200+ | XP-120 | A8N-SLI Premium | 2GB RAM | XFX 6600GT w/VF700 | 74GB Raptor & 320GB 3200JD | P180 | SmartPower II 500W | 2x Dell 1704FPV (Digital)
Media Center: Athlon XP-M 2500+ @ 2.2GHz | ALX800 w/92mm Panaflo | 1GB RAM | 40GB WD | SLK3000B | Modulated, Fan-Swapped 380S PSU
[/size]

Gohan
Posts: 36
Joined: Mon Jun 14, 2004 2:02 am

Post by Gohan » Thu Dec 29, 2005 1:45 pm

Thanks for that, I looked at the dimensions and it a little too tall for the Shuttle. I have decided to ditch the X1600 pro and go for a passive X700 or 6600GT.

Post Reply