Lian Li Q08 (w.i.p.)
Posted: Sat Nov 13, 2010 7:53 am
Hi to everyone: this is my little project based on Lian Li Q08; nowadays is still not complete, 'cause I' waiting for the vga (I don't know exactly which one..maybe cayman, if it fit )
now, this is the hardware:
case: Lian Li Q08
motherboard: asus M4A88T-I + enzotech mosfet cooling
cpu: amd X6 1055t 95w
ram: 2x4 gb so dimm ddr3 corsair @ 1333mhz
Hard disk: 1 x ssd intel 160gb G2 + 1 x 2,5" 320gb western digital scorpio black
Optical drive: slot in slim 5,25" blu ray reader optiarc BC-5600s
cooling: corsair h50 + scythe slip stream 140mm + nanoxia pwm converter
case fan: 1 x 120mm scythe slip stream
psu: enermax modu 87+ 500w
and here some photos: I tryed to do my best for cable menagemant, but it was not so easy for the size of the Q08
http://www.pctunerup.com/up/image.php?s ... 814_03.jpg
http://www.pctunerup.com/up/image.php?s ... 913_04.jpg
http://www.pctunerup.com/up/image.php?s ... 615_01.jpg
http://www.pctunerup.com/up/image.php?s ... 715_02.jpg
http://www.pctunerup.com/up/image.php?s ... 952_05.jpg
http://www.pctunerup.com/up/image.php?s ... 027_06.jpg
http://www.pctunerup.com/up/image.php?s ... 119_07.jpg
this is a screenshot avout temps after 30min of OCCT: the cpu is downvolted to 1.1v (but NOT downclock, so 2.80ghz/3.30ghz turbocore), but I think that I could overclock a bit (max temp for 1055t 95w is 71°, instead 65° for the 1055t 125w)
http://www.pctunerup.com/up/image.php?s ... cctq08.jpg
now, this is the hardware:
case: Lian Li Q08
motherboard: asus M4A88T-I + enzotech mosfet cooling
cpu: amd X6 1055t 95w
ram: 2x4 gb so dimm ddr3 corsair @ 1333mhz
Hard disk: 1 x ssd intel 160gb G2 + 1 x 2,5" 320gb western digital scorpio black
Optical drive: slot in slim 5,25" blu ray reader optiarc BC-5600s
cooling: corsair h50 + scythe slip stream 140mm + nanoxia pwm converter
case fan: 1 x 120mm scythe slip stream
psu: enermax modu 87+ 500w
and here some photos: I tryed to do my best for cable menagemant, but it was not so easy for the size of the Q08
http://www.pctunerup.com/up/image.php?s ... 814_03.jpg
http://www.pctunerup.com/up/image.php?s ... 913_04.jpg
http://www.pctunerup.com/up/image.php?s ... 615_01.jpg
http://www.pctunerup.com/up/image.php?s ... 715_02.jpg
http://www.pctunerup.com/up/image.php?s ... 952_05.jpg
http://www.pctunerup.com/up/image.php?s ... 027_06.jpg
http://www.pctunerup.com/up/image.php?s ... 119_07.jpg
this is a screenshot avout temps after 30min of OCCT: the cpu is downvolted to 1.1v (but NOT downclock, so 2.80ghz/3.30ghz turbocore), but I think that I could overclock a bit (max temp for 1055t 95w is 71°, instead 65° for the 1055t 125w)
http://www.pctunerup.com/up/image.php?s ... cctq08.jpg