advice for a UPGRADE of a SILENT HIGH-END PC
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
advice for a UPGRADE of a SILENT HIGH-END PC
this is my pc
P180B
i added a scythe 10 fan adaptor with a antec tricool 120x38 at L mode
this is the heart
hardware
E6600 2.4 to 3.0 1333 FSB cooled by ULTRA 120 with NOCTUA 1200rpm AUTO MODE
P5W64 WS Quartet
2GB DDR2 TEAM XTREAM 800 4-4-4-10
XFX 7900GTX XXX
INTEL 1000GT LAN CARD
X-FI XTREME MUSIC
in central BOX 1 RAPTOR 74 ADFA 16mb buffer
in lower box 2x WD3200KS non-raid
SEASONIC S12 500W LAST REVISION
Fan's :
TOP 120x38 ANTEC TRICOOL L MODE
REAR NOCTUA 1200 7v
FRONT TOP 120x38 ANTEC TRICOOL L MODE
FRONT MIDDEL NOCTUA 1200 7v
in the BOTTOM MIDDEL 120x38 ANTEC TRICOOL L MODE
i have 2 more NOCTUA 1200 but i didn't instaled
whel i like to go for KENSFIELD , and DX10 CARD this chirsmas or 1Q of 2007
i and like to upgrade this worksation
i think that the first is buy a S12-650 80+ to get some extra power
but my temps now are realy hot cpu with INTEL TAT ( the best cpu temp and test for conroe ) is near to 69º in FULL
and CHIPSET are at 39-41º
change the case?
i like some new case of LIAN LI like PC-A10B
http://www.lian-li.com/Product/Chassis/ ... PC-A10.htm
but i don't know that is silent
if you have any NEW case that i don't know , plase tell it.
change AIRFOW or change any FANS?
i have in past NEXUS b/W fans and NOCTUA have more cm2 at same noise and rpm ( subgest think )
i like 120x38 because i makes more preassure.
if you have any sugguestion plase post it.
thanks to all
P180B
i added a scythe 10 fan adaptor with a antec tricool 120x38 at L mode
this is the heart
hardware
E6600 2.4 to 3.0 1333 FSB cooled by ULTRA 120 with NOCTUA 1200rpm AUTO MODE
P5W64 WS Quartet
2GB DDR2 TEAM XTREAM 800 4-4-4-10
XFX 7900GTX XXX
INTEL 1000GT LAN CARD
X-FI XTREME MUSIC
in central BOX 1 RAPTOR 74 ADFA 16mb buffer
in lower box 2x WD3200KS non-raid
SEASONIC S12 500W LAST REVISION
Fan's :
TOP 120x38 ANTEC TRICOOL L MODE
REAR NOCTUA 1200 7v
FRONT TOP 120x38 ANTEC TRICOOL L MODE
FRONT MIDDEL NOCTUA 1200 7v
in the BOTTOM MIDDEL 120x38 ANTEC TRICOOL L MODE
i have 2 more NOCTUA 1200 but i didn't instaled
whel i like to go for KENSFIELD , and DX10 CARD this chirsmas or 1Q of 2007
i and like to upgrade this worksation
i think that the first is buy a S12-650 80+ to get some extra power
but my temps now are realy hot cpu with INTEL TAT ( the best cpu temp and test for conroe ) is near to 69º in FULL
and CHIPSET are at 39-41º
change the case?
i like some new case of LIAN LI like PC-A10B
http://www.lian-li.com/Product/Chassis/ ... PC-A10.htm
but i don't know that is silent
if you have any NEW case that i don't know , plase tell it.
change AIRFOW or change any FANS?
i have in past NEXUS b/W fans and NOCTUA have more cm2 at same noise and rpm ( subgest think )
i like 120x38 because i makes more preassure.
if you have any sugguestion plase post it.
thanks to all
-
- Posts: 35
- Joined: Thu Oct 19, 2006 9:57 am
- Location: Holland
Replace the NB cooler by a Thermalright 05.
Nice rig btw.
For the rest (CPU, videocard) I would wait. Your system is just too good to upgrade now. With the same money that buys you a DX10 and a Kensington next month, you can buy much more in 6 months.
Btw, why do you have a LAN PCI-card, instead of using the onboard LAN?
Nice rig btw.
For the rest (CPU, videocard) I would wait. Your system is just too good to upgrade now. With the same money that buys you a DX10 and a Kensington next month, you can buy much more in 6 months.
Btw, why do you have a LAN PCI-card, instead of using the onboard LAN?
I wouldn't change the case that's a very nice case. The main thing I don't like about it is it's on the bigger side and has alot of fans. I suggest you find out what's making the most noise? and just because there is a bunch of spots for fans doesn't mean you have to use them all. I also think your S12 500W is sufficient and you don't need to get a new PSU.
That's a shitload of fans you have there.. You could probably get away with just one rear exhaust and a slow fan on the CPU heatsink, and skip the (very noisy) 38mm antec and the kama-bay. You should also not need a fan in the lowert compartment, the S12 should provide enough airflow. Certainly you donät need something as fast s a tricool in there.
You only need about 2 fans. One for the rear exhaust, and one on the CPU. You might want a front intake fan too, but that's it. I would use the Nexus fan on the CPU since its quieter, put a Tri-Cool for the exhaust and maybe a Nexus or Tri-Cool for the top front intake. The Seasonic provides enough airflow for the bottom.
now all the fans are NEXUS B/W and CPU cooling it's a NINJA REV B with NEXUS B/W
and F.A its SEASONIC S12+ 650W
for HARDWARE
E6600 2.4 to 3.0 1333 FSB cooled by NINJA REV b. with NEXUS B/W AUTO MODE
INTEL BAD AXE 2
4GB DDR2 MICRON FAT BODY D9 800 4-4-4-10
XFX 8800GTX
X-FI XTREME MUSIC
in central BOX 1 RAPTOR 74 ADFA 16mb buffer
in lower box 2x WD3200KS non-raid
and F.A its SEASONIC S12+ 650W
for HARDWARE
E6600 2.4 to 3.0 1333 FSB cooled by NINJA REV b. with NEXUS B/W AUTO MODE
INTEL BAD AXE 2
4GB DDR2 MICRON FAT BODY D9 800 4-4-4-10
XFX 8800GTX
X-FI XTREME MUSIC
in central BOX 1 RAPTOR 74 ADFA 16mb buffer
in lower box 2x WD3200KS non-raid