any Socket P MotD mobo's out yet?

sgksgk · Post by **sgksgk** » Thu Jul 15, 2010 4:53 pm

Thanks for letting me know... I have a Mobile Extreme 2.8GHz CPU siting around. But you lost me here. What's only sell B2B and
VAT number? Like they dont sell to end-user?
(Sorry for the late replay, I lost this thread)

SandSand wrote:
sgksgk wrote:So where to buy a DFI CA331 board? I only found places that list them buy dont sell them
This is where I bought it: www.rosch-computer.de
But they only sell B2B, so you need a VAT number.
But I think the jetway board looks just as good + it's cheaper.

The DFI board is btw working like a charm. Drawback is the proprietary heatsink holes so I am using a nothbridge heatsink from thermalright. But it is big enough for this CPU.

Adding that I am using the Winmate 130W PSU and a 120 brick, I am cooling the whole system with a single 120mm nexus, which is usually runnning at lowest speed. Nice and quiet
Maybe I should upload a picture ...

SandSand · Post by **SandSand** » Fri Jul 16, 2010 12:10 am

sgksgk wrote:Thanks for letting me know... I have a Mobile Extreme 2.8GHz CPU siting around. But you lost me here. What's only sell B2B and
VAT number? Like they dont sell to end-user?
(Sorry for the late replay, I lost this thread)

B2B = business to business, so they don't sell to end users.

sgksgk · Post by **sgksgk** » Fri Jul 16, 2010 1:49 am

SandSand wrote:
sgksgk wrote:Thanks for letting me know... I have a Mobile Extreme 2.8GHz CPU siting around. But you lost me here. What's only sell B2B and
VAT number? Like they dont sell to end-user?
(Sorry for the late replay, I lost this thread)

B2B = business to business, so they don't sell to end users.

If that's the case, doesnt seem like i have a chance, is there anything businese here like to sell me one ??

sgksgk · Post by **sgksgk** » Fri Jul 16, 2010 6:32 am

Can someone here help me buy a DFI CA331 board?

Hazelrah · Post by **Hazelrah** » Wed Sep 15, 2010 10:10 pm

Just noticed this motherboard on Newegg:
JetWay JNC64-LF Socket P NVIDIA GeForce 9100M G HDMI Mini ITX Intel Motherboard

It has an impressive feature list:
Socket P
1066MHz FSB
DDR3 ram (up to 8 GB)
PCIe x16 slot
VGA/DVI/HDMI out
Nvidia GeForce 9100M G (should support PureVideo/DXVA acceleration -- I think it is VP2)

Priced very reasonably (compared to MSI boards) at US$120. Note the Newegg reviews that say that a Socket P heatsink is not included, and the stock northbridge cooler is horrible.

quest_for_silence · Post by **quest_for_silence** » Thu Sep 16, 2010 4:50 am

A bit OT

Why going with such an outdated and unpractical solution, today?

/A bit OT

Regards,
Luca

wicked · Post by **wicked** » Tue Sep 21, 2010 9:22 pm

Penryn offers the lowest wattage for a fast chip. There are no low power Core iX chips yet. They are all embedded.

To quest, the downside of the Jetway board is the nVidia onboard GPU adds about 20w.