Gigabyte P35-DS3L rev2 VDROOP MOD, CONFIRMED TO WORK!
Posted: Sat May 03, 2008 7:02 pm
Yup thats right Hank123 of ocforums.com with the help of my photos found a VERY easy pencil Vdroop mod. Woked like CHARM on my DS3L...
nd4spdbh2 wrote: ok just did a quick test to see what my DS3L does in non modded form... E4300 @ 3ghz @ 1.25v bios = 1.216V idle 1.184V load.
EDIT 2... OH SNAP... IT WORKS!!!.... default resistance for said resistor is 1975ohms, i penciled down to 910.... same settings as above (1.25V bios) and now ideling at 1.232v and loading at 1.216.... so up .016v idle and .032v load!!!!
nd4spdbh2 wrote:OH this is BIG... penciled the resistor down to 320 ohms... can you say GOOD BY vdroop??? YES Idle and load are now 1.232v WITH ABSOLUTLY ZERO FLUCTUATION!.... bios set is 1.250
hank123 you my friend are god!
FULL DETAILS CLICK HEREnd4spdbh2 wrote: This vdroop mod allowed me to go from my original OCD E4300 @ 3.0ghz @ 1.250V bios (1.184v load) and take the voltage down to 1.200 volt (bios) and have the SAME IDLE and LOAD voltages of 1.184v
This also changed my stock clock lowest voltage. Before the mod @ stock 1.8ghz it took 0.95V in bios and i would load at 0.88V, now i can set the bios voltage to 0.90v and have it idle and load at .88V!!!!!!! All this with the stock VID of 1.3250