SPCR

My TPII started to keep huge rattling bearing noise and I cannot RMA it. Its 2,5 years old PSU and I've lost receit.

My choices are either do Fanswap, which I've never done. Or buy Corsair HX 520W

I think I would ask around bit about fanswap first. Would F-model scythe S-flex ( 1600 rpm ) be overshot and E-model ( 1200 rpm ) be enough ?

Any tips, suggestions ,advices and links how to do fan swap etc are welcomed.

Edit: Yes I forgot to put system its powering:

Motherboard: Asus A8M32-Sli Delux
CPU: Amd X2 3800+ Manchester
CPU Cooler: Thermalright HR-01 K-8 with NCB fan.
Memory: 2 x 512mb Corsair XMS TWINX 1024-3200C2
Hdd: Samsung Spinpoint P Series 80 GB Ide.
PSU: Antec TruePower II 550W
Vga-cards: 2 x Gainward GF 7900gs Golden Sample with stock two slot cooling. ( Quite quiet in once you set those with Rivatuner )
Sound card: Soundblaster Live 24-bit. I would use onboard audio, but I had conflict with one game, so I put this instead and game ran smoothly. I haven't removed it.
Case: Antec P182B
Case fans: Antec Tri-Cools on low.
Keyboard: Logitech Office keyboard ( bulk )
Mouse: Microsoft / Razer Habu
Mousepad: steelpad 4S
Monitor: Nokia 447xi 17" CRT

Moro thejamppa (AKA thedude)

Depending on the PSU fan controller, power usage etc the two fans might spin at similar speeds anyway, so I would go for the 1600RPM fan to allow better cooling if required.

This particular power supply forum has a sticky about PSU fan swaps.

I wouldn't recommend changing slower speed fan than original to these older Antecs made by CWT, many of those have already big enough reliability problems without heating components more.

thejamppa wrote:My choices are either do Fanswap, which I've never done. Or buy Corsair HX 520W

Be very careful with a fan swap on a PSU prone to Fuhjyyu sudden death sindrome.
Take a look inside your PSU, maybe you'll see some caps like these:



Those pics are 2 days old from a SP2 500 (same Fuhjyyu problems). That guy run perfect with a X1950PRO or even 8800GTS but it has problems with 2xX1950PRO Crossfire.
So be careful with fan swap in SP/TP.

I'd say to go with Corsair HX520.

you're maybe right... After all... HX is modular and has longer cords. I can make much better cabling in my P182B.