(silenty) replacement psu

PSUs: The source of DC power for all components in the PC & often a big noise source.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar

Post Reply
lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

(silenty) replacement psu

Post by lanceuppercut » Mon Jun 06, 2011 11:35 am

running a core2/8800gts that is going to be upgraded to a i5 2500k/either 4xx or 5xx series nvidia card and has come to my attention that my psu (sparkle 460w psu) might not be beefy enough to run it at its overclocked settings (brought a prebuilt bundle from scan with it running at 4.5ghz)

will my psu be able to power my bits, if not, what silent recommendations are there that wont break the bank?

tanassi
Posts: 93
Joined: Sat Jun 04, 2011 2:25 pm

Re: (silenty) replacement psu

Post by tanassi » Mon Jun 06, 2011 1:14 pm

lanceuppercut wrote:running a core2/8800gts that is going to be upgraded to a i5 2500k/either 4xx or 5xx series nvidia card and has come to my attention that my psu (sparkle 460w psu) might not be beefy enough to run it at its overclocked settings (brought a prebuilt bundle from scan with it running at 4.5ghz)

will my psu be able to power my bits, if not, what silent recommendations are there that wont break the bank?
I opted for a Seasonic X760. sheer class.

systemlayers
Posts: 44
Joined: Sun Dec 26, 2010 2:18 am

Re: (silenty) replacement psu

Post by systemlayers » Mon Jun 06, 2011 4:24 pm

Seasonic 560 should be able to run just about any single GPU setup. A good 500w can run a Gtx 580 even though its specifications state 600w. I pull just under 400w from the wall artificial load on both my 2600k + 580.

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Mon Jun 06, 2011 9:35 pm

systemlayers wrote:Seasonic 560 should be able to run just about any single GPU setup. A good 500w can run a Gtx 580 even though its specifications state 600w. I pull just under 400w from the wall artificial load on both my 2600k + 580.
is that an overclocked 2600k? as i'm planning to run mine overclocked..

tanassi
Posts: 93
Joined: Sat Jun 04, 2011 2:25 pm

Re: (silenty) replacement psu

Post by tanassi » Mon Jun 06, 2011 11:04 pm

I run a i7 2600k and a 6870. Both properly OC'ed. I opted for a higher wattage PSU because of the fan curve: the more power it draws, the more the fan will spin (usually). Thats why I opted for a Seasonic X760 (noise and squeel/ coile whine free): the load will never put the fan into overdrive (it's a hybrid fan with 3 settings, silent until a certain load, then 16db fan spin and then... I dont know, I never get that far).

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Tue Jun 07, 2011 1:06 am


xinaes
Posts: 37
Joined: Tue Jan 25, 2011 6:48 am
Location: uk
Contact:

Re: (silenty) replacement psu

Post by xinaes » Tue Jun 07, 2011 1:43 am

lanceuppercut wrote:how would this one cope with either a gtx560 or 560ti: 520W Seasonic S12II-520 Bronze, 80 PLUS Bronze, 85% Eff', EPS 12V, 120mm Silent S2FC Fan, ATX v2.3
I was wondering the same thing.

b_rubenstein
Posts: 273
Joined: Tue Aug 04, 2009 7:03 am
Location: Brooklyn, NY

Re: (silenty) replacement psu

Post by b_rubenstein » Tue Jun 07, 2011 4:32 am

Your old components are much less power efficient than the new ones, and even though the new system will be faster, it probably doesn't use any more power; possibly less.

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Tue Jun 07, 2011 4:50 am

b_rubenstein wrote:Your old components are much less power efficient than the new ones, and even though the new system will be faster, it probably doesn't use any more power; possibly less.
interesting, would i cause any damage to any components if i upgraded the board/cpu/gfx then if i doesn't work due to the psu not being beefy enough *then* upgrade the psu if needed?

johnniecache7
Posts: 332
Joined: Wed Jan 17, 2007 8:10 pm
Location: Toronto - Ontario - Canada

Re: (silenty) replacement psu

Post by johnniecache7 » Tue Jun 07, 2011 7:09 am

lanceuppercut wrote:how would this one cope with either a gtx560 or 560ti: 520W Seasonic S12II-520 Bronze, 80 PLUS Bronze, 85% Eff', EPS 12V, 120mm Silent S2FC Fan, ATX v2.3
I own this PSU myself but not gtx 560 Seasonic S12II-520 Bronze shouldn't have and issue with that video card but if you want some head room and not loading your PSU will make it more slient then get the Seasonic S12II-620 Bronze.
Last edited by johnniecache7 on Tue Jun 07, 2011 10:18 am, edited 1 time in total.

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Tue Jun 07, 2011 8:34 am

how about this Antec HCG-620, i can currently get it for £47 delivered compared to £60 for the seasonic.

both are 80 PLUS BRONZE certification (whatever that means!), the seasonic has a 120mm fan whilst the antec is higher rated and has a 135mm fan and the antec is, according to scan's page, more efficient by a whole 3% :)

taking all into account, antec should be better? bigger fan = slower spin to keep same temp? higher power rating and cheaper?

johnniecache7
Posts: 332
Joined: Wed Jan 17, 2007 8:10 pm
Location: Toronto - Ontario - Canada

Re: (silenty) replacement psu

Post by johnniecache7 » Tue Jun 07, 2011 8:43 am

lanceuppercut wrote:how about this Antec HCG-620, i can currently get it for £47 delivered compared to £60 for the seasonic.

both are 80 PLUS BRONZE certification (whatever that means!), the seasonic has a 120mm fan whilst the antec is higher rated and has a 135mm fan and the antec is, according to scan's page, more efficient by a whole 3% :)

taking all into account, antec should be better? bigger fan = slower spin to keep same temp? higher power rating and cheaper?
Antec HCG-620 is nothing more then slightly modified Seasonic S12II 620/M12II. The guts are the same but with 135mm ADDA fan instead of the ADDA 120mm. I cannot speak for how quiet it is but hey it's Seasonic.

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Tue Jun 07, 2011 8:50 am

johnniecache7 wrote:Antec HCG-620 is nothing more then slightly modified Seasonic S12II 620/M12II. The guts are the same but with 135mm ADDA fan instead of the ADDA 120mm. I cannot speak for how quiet it is but hey it's Seasonic.
if its essentially a seasonic (they're a good make, right?) i'm thinking that as i'm looking at a GTX560 Ti, the extra power overhead can't hurt.

johnniecache7
Posts: 332
Joined: Wed Jan 17, 2007 8:10 pm
Location: Toronto - Ontario - Canada

Re: (silenty) replacement psu

Post by johnniecache7 » Tue Jun 07, 2011 9:29 am

lanceuppercut wrote:
johnniecache7 wrote:Antec HCG-620 is nothing more then slightly modified Seasonic S12II 620/M12II. The guts are the same but with 135mm ADDA fan instead of the ADDA 120mm. I cannot speak for how quiet it is but hey it's Seasonic.
if its essentially a seasonic (they're a good make, right?) i'm thinking that as i'm looking at a GTX560 Ti, the extra power overhead can't hurt.
Well yes, I don't recall Seasonic making any lemons but noise level varies from design to design. I've not heard much about the Antec HCG-620 being crazy loud as they not many reviews.

lanceuppercut
Posts: 55
Joined: Tue Mar 20, 2007 10:39 pm

Re: (silenty) replacement psu

Post by lanceuppercut » Tue Jun 07, 2011 9:55 am

thats good enough for me, my current psu is quite old now so could do with a replacement :)

systemlayers
Posts: 44
Joined: Sun Dec 26, 2010 2:18 am

Re: (silenty) replacement psu

Post by systemlayers » Tue Jun 07, 2011 10:09 am

400w from the wall with a slightly overclocked 580 (833/2170) and overclocked 2600k (4.4ghz @ 1.28volt). I only have 1 hard drive and 2 solid state drives and slow moving fans mind you so overhead above the cpu and gpu is small.
I was benchmarking with my 580 and an old 8400 (which kept up with the 580 in 90% of my tests) from an old corsair 550vx.
So a seasonic 560 is more than enough trust me.
Also that 400w from the wall is under absolutely artificial loads you'll never ever see normally.
If you get a good 750w+ though you'll get more optimal efficiencies potentially (50% load) and even have space for SLI 580 if you ever wanted that.

Post Reply