Good 120mm fan for Fortron FSP350-60PN modding

PSUs: The source of DC power for all components in the PC & often a big noise source.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar

Post Reply
everydae
Posts: 26
Joined: Sat Jan 17, 2004 3:07 pm
Location: MA, U.S.A

Good 120mm fan for Fortron FSP350-60PN modding

Post by everydae » Mon Jan 26, 2004 5:18 am

Hey guys, I need some words from you guys. I found out that it is not that quiet at its minimum setting. Of course it is quiet, but I want it to be a bit quieter. So, I opened it up yesterday, and it has D12SH-12 from Yate loon. Its spec is 78CFM-43dB@12V. I was thinking about replacing it with Panaflo 120mm, but it won't fit because there's not enough space for 38mm fan, so 120*120*25 is my choice. What would you recommend for it? Or should I just let it as is?

Thanks!

BTW, it is not Aurora or PFC one.

spirit
Posts: 17
Joined: Sat Jan 17, 2004 9:14 am
Location: London, United Kingdom

Post by spirit » Mon Jan 26, 2004 5:36 am

hi everydae, i have the same psu as you and i've just ordered a 120x120x25mm evercool fan (not the aluminium one) model # 12025 M12S, when i get it tomorro i'll tell u if it's good :wink:

that yate loon fan is piece of s***!

everydae
Posts: 26
Joined: Sat Jan 17, 2004 3:07 pm
Location: MA, U.S.A

Post by everydae » Mon Jan 26, 2004 5:45 am

Cool :D BTW, which one did you order? It looks like there are many different models for 120mm.

dukla2000
*Lifetime Patron*
Posts: 1465
Joined: Sun Mar 09, 2003 12:27 pm
Location: Reading.England.EU

Post by dukla2000 » Mon Jan 26, 2004 6:03 am

[size=75]2009/Oct: Jetway JNC81-LF * 4850e naked under fanless Xigmatek Apache * Antec mini Skeleton w/Nexus 120mm PWM fan * Delta 90W brick w/Skeleton DC-DC board * WD2500BEVT 250Gb blue[/size]

Post Reply