NoVibes III combined tray?

anakintjc · Post by **anakintjc** » Sat Jul 21, 2007 4:59 am

Hi,

I own a Antec Sonata (I) and my system is fairly quiet but the resonance of my hdd's is disturbing me!

I surfed the internet and found out that the NoVibes III (from noisemagic) is
a pretty good product...

Now my question is : i see there excist trays :

https://ssl.kundenserver.de/s8498340.sh ... =283728=29

They are for the Antec P-150 but will they fit in the sonata too?

anakintjc · Post by **anakintjc** » Wed Jul 25, 2007 9:33 am

Does anybody know if the hdd trays from the P150 are compatible with the antec sonata?

Das_Saunamies · Post by **Das_Saunamies** » Wed Jul 25, 2007 10:37 am

Measurements of Sonata HDD tray: 114mm wide, 93/125mm deep, 21/24mm high. Depth is for tray/tray+locking, height is for tray/tray+dent. Locking edge is 15mm from front.

Height 2,1 cm
Width 11,4 cm
Depth 9,3 cm

These are actual measurements I took of a tray of mine. Now if someone could do the same for a P150.

Update:
Antec spare parts P150 tray at http://www.antec.com/Detail.bok?no=515
Antec spare parts Sonata tray at http://www.antec.com/Detail.bok?no=514

Look pretty identical to me except for the grommets. I'd order three but they don't sell those in the EU.

Sooty · Post by **Sooty** » Thu Jul 26, 2007 5:47 am

Das_Saunamies wrote:Measurements of Sonata HDD tray: 114mm wide, 93/125mm deep, 21/24mm high. Depth is for tray/tray+locking, height is for tray/tray+dent. Locking edge is 15mm from front.

Iâ€™m sure the P150/Solo trays are wider. 130mm, IIRC. The extra width is to accommodate the optional hdd suspension.

Das_Saunamies · Post by **Das_Saunamies** » Fri Jul 27, 2007 1:51 am

Alrighty. Customer feedback to Antec store maybe, get them to list measurements?

Sooty · Post by **Sooty** » Fri Jul 27, 2007 2:47 am

P150 tray is 130mm wide - just measured it.

anakintjc might want to contact NoVibes to see if they plan Sonata versions.

anakintjc · Post by **anakintjc** » Sat Jul 28, 2007 2:07 am

ok thx guys for the feedback!

Das_Saunamies · Post by **Das_Saunamies** » Sat Jul 28, 2007 3:36 am

You're welcome, thanks for the P150 measurement Sooty.