My Antec case has a standard hard drive cage at the bottom and front of the case.
I bought an SSD and a Rosewill adaptor. It's easy enough to put the SSD in the Rosewill, but the Rosewill no way fits into the standard hard drive cage - it's way too short and the screws don't begin to line up.
All the 'SSD adaptors' I see appear to be getting your SSD to fit into a floppy drive enclosure.
Any suggestions on an adaptor to put my SSD in a standard tube cage???????
I need an adaptor kit to put an SSD in my Antec case
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Re: I need an adaptor kit to put an SSD in my Antec case
Duct tape? I've also used velcro and adhesive tape. Sometimes it's possible to mount it with just one screw where you mount a normal 3.5" HDD.
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: I need an adaptor kit to put an SSD in my Antec case
Which Antec case is it?
Re: I need an adaptor kit to put an SSD in my Antec case
Here you go: http://www.newegg.com/Product/Product.a ... 6817994141 Works perfectly
Re: I need an adaptor kit to put an SSD in my Antec case
SSDs weigh next to nothing and it doesn't take much to hold them in place. If you can align one screw in the drive cage, that'll do. Or, use velcro.
-
- *Lifetime Patron*
- Posts: 2269
- Joined: Sun May 21, 2006 9:09 am
- Location: Northern California.
Re: I need an adaptor kit to put an SSD in my Antec case
also, 3m double sided foam tape, and zipties.