how hot can a athlon 64 run? (undervolting fan to 5volts)

Cooling Processors quietly

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
calam63
Posts: 92
Joined: Fri May 21, 2004 1:18 pm
Location: Sacramento, CA, USA
Contact:

how hot can a athlon 64 run? (undervolting fan to 5volts)

Post by calam63 » Thu Jul 01, 2004 12:33 pm

So I finally got a athlon 64 3200+ and I am loving it after a coupld of problems that I recently have. But i undervolted to 1.375V and am currently using a 5v JMC Panther fan I think. The current temperature I am reading is 54c from cpu and 39c from mobo

5v 80mm JMC Panther on cpu
5v 92mm Panaflo M1B on exhaust

was wondering how high is okay for my cpu?

edit: do you think it is a better idea to runt he m1b 5v on the cpu instead?

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

What HS are you using?

Post by NeilBlanchard » Thu Jul 01, 2004 5:42 pm

Hello:

You don't mention what HS you are using. And 54C is at 100% load? If so, then it isn't too bad -- if you know what your ambient air temp is, that would have a strong influence on things, as well. :wink:

calam63
Posts: 92
Joined: Fri May 21, 2004 1:18 pm
Location: Sacramento, CA, USA
Contact:

Post by calam63 » Thu Jul 01, 2004 5:45 pm

hmm ambient temperature - i don't know lol no thermometer - but it has to be like 80f

the hs i am using is a slk-948u - switched my 92mm fan (5v) to my cpu and its now at 50c/120f so i think i am going to go with that - just ordered a 120mm fan (ralf's p4c rig) and going to see what that is like :)

i can't wait to get my seasonic and a quieter video card to finish off this rig

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

80F, huh?

Post by NeilBlanchard » Thu Jul 01, 2004 5:55 pm

Hello:

Well 80F is on the warm side, so 50C (now) is quite good if that is at 100% CPU load -- like running Folding@Home. Even 54C isn't bad. If the case will take a 120mm exhaust, then that would also be a big help, and at 5v or less, it would still move more air than the two fans you have put together!

calam63
Posts: 92
Joined: Fri May 21, 2004 1:18 pm
Location: Sacramento, CA, USA
Contact:

Post by calam63 » Thu Jul 01, 2004 6:00 pm

cool thanks for all the help - these are great forums - hehe my wires are a mess at the moment - and hopefully i will be able to make those nice and neat later too -

rmaing my ram and such - didn't help - running my computer with one stick of 256 pc 2700 lol - can't wait to get all the kinks out

Post Reply