The stack effect in practice.

Cooling Processors quietly

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
mb2
Posts: 606
Joined: Sun Jun 06, 2004 2:42 pm
Location: UK

The stack effect in practice.

Post by mb2 » Tue Mar 15, 2011 5:06 pm

i3-530 @ 2GHz, prime95 for 75 mins.

Hiper 212-plus. No fans: 66/7 *C.

With the help of a pringles can, some cardboard and a little duct tape: 56/7*C.

10*C fall not so bad for a couple of minutes bodge job eh?

Fire-Flare
Posts: 422
Joined: Sun Jun 13, 2010 12:44 pm
Location: Seattle

Re: The stack effect in practice.

Post by Fire-Flare » Tue Mar 15, 2011 6:13 pm

Sounds impressive, got a pic?

mb2
Posts: 606
Joined: Sun Jun 06, 2004 2:42 pm
Location: UK

Re: The stack effect in practice.

Post by mb2 » Wed Apr 06, 2011 2:33 pm

It wasn't particularly photogenic but here is a diagram;
Image

Following this i tried extending the chimney, roughly doubling the height with another tube and connecting tube. Temps didn't fall much at 2GHZ (already fairly low for stack effect), maybe a 5*C fall IIRC. However, perhaps more interestingly..

2.8ghz / 0.975v
GPU 1GHZ / 1.3V
QPI 44x175 / 1.21v
RAM 1750mhz / 1.64v

80/1*C prime 95 peak (in-place large FFTs)
ambient ~20*C

Here the airflow was much more noticable... perhaps like an undervolted 60-80mm fan at the exit of the chimney.

Onwards and upwards to greater things and some overclocking!
CPU @ 3GHz/1v, GPU at 1050 /1.4v

After around 15mins of priming on an already hot HS, i got bored of priming; it was at 81*C and nearing the end of its temperature curve. Playing GTA IV gave a stable, max temp of 70*C. This is a good indicator as nothing real-world i have done yet has delivered temps like p95.

Post Reply