Silly fan question.

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
rei
Posts: 967
Joined: Wed Dec 08, 2004 11:36 am

Silly fan question.

Post by rei » Sat Feb 26, 2005 10:36 am

I have a vantec stealth 80mm fan i've strapped at back of case. Due to low airflow I can't really tell which way it's blowing. I've got the label side on the inside of the case.

Is that right for it to suck air out?

EricTerminator
Posts: 44
Joined: Thu Feb 24, 2005 5:18 pm

Silly fan question.

Post by EricTerminator » Sat Feb 26, 2005 10:56 am

Hi rei !

Normally, the label should watch the outside, if you want it to extract the hot air.

See you

rei
Posts: 967
Joined: Wed Dec 08, 2004 11:36 am

Post by rei » Sat Feb 26, 2005 11:20 am

damn. no wonder the lower front (w/o fan) is hot to the touch against case and why the hd was heating up. i was pulling in air for 3 months and the cpu fan + video card fan was trapping air there!

EricTerminator
Posts: 44
Joined: Thu Feb 24, 2005 5:18 pm

Silly fan question.

Post by EricTerminator » Sat Feb 26, 2005 11:30 am

Hi rei !

Just in case you buy fans in the future, the standard is that the the air travels from the part of the fan where there is no sticker and no fixations for the central motor to the part which has the fixations and the sticker.

In case of doubt, you can watch the sides of the fan ; there are often 2 arrows ; one of them shows the direction of the fan's rotation, and the other shows the direction of the airflow. :wink:

See you

rei
Posts: 967
Joined: Wed Dec 08, 2004 11:36 am

Post by rei » Sat Feb 26, 2005 12:07 pm

actually my vantecs have stickers on both sides
one side has a wire leading into though and that seems to be the one the air goes out :(

rei
Posts: 967
Joined: Wed Dec 08, 2004 11:36 am

Post by rei » Sat Feb 26, 2005 12:07 pm

hope i haven't harmed things too much by trapping all that hot air (side of case at front was hot ) for 3 months :/

burcakb
Posts: 1443
Joined: Tue Mar 09, 2004 9:05 am
Location: Turkey

Post by burcakb » Sat Feb 26, 2005 12:12 pm

And get rid of the Vantec while you're at it :) It's by no means quiet

EricTerminator
Posts: 44
Joined: Thu Feb 24, 2005 5:18 pm

Silly fan question.

Post by EricTerminator » Sat Feb 26, 2005 1:38 pm

one side has a wire leading into though and that seems to be the one the air goes out
Correct.

See you

Krispy
Posts: 95
Joined: Mon Nov 01, 2004 8:24 am
Location: S.E. England

Post by Krispy » Thu Mar 03, 2005 5:08 pm

On the side of many fans you will often see 2 small arrows marked into the plastic. One indicates rotation, the other air flow direction.
Yours may well be exeptions!

Duh! I see Eric has already mentioned this :oops:

cpemma
Posts: 351
Joined: Sun May 11, 2003 2:31 pm
Location: S Yorks, OK
Contact:

Post by cpemma » Tue Mar 08, 2005 11:59 am

rei wrote:actually my vantecs have stickers on both sides...
:D Better for advertising. The sticker that doesn't spin is on the out side.

Post Reply