I've got an Antec Solo case with two front mounted 92mm Antec Tricool fans and one rear mounted Scythe 120mm "E" model. The other day I noticed that it was too noisy. Checked out the fans, it turned out one of the 92mm fans had a buzz and both 92 mm fans were individually just as noisy as my Scythe. So, I'm looking for a replacement (that I can get in the States). Low cfm (20 to 30) and as low decibel as I can get. Any recommendations most appreciated. Oh, the 92 Tricools were set on the lowest speed.
Thanks
Tom
Looking for recommendations for 92mm, low cfm, low db bans
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 6
- Joined: Tue May 08, 2007 9:29 am
I will be ordering a couple of these for my P150 sometime this month.
http://www.ncix.com/products/index.php? ... ure=Noctua
http://www.ocmodshop.com/ocmodshop.aspx?a=1066
http://www.ncix.com/products/index.php? ... ure=Noctua
http://www.ocmodshop.com/ocmodshop.aspx?a=1066
-
- Posts: 6
- Joined: Tue May 08, 2007 9:29 am
-
- Posts: 2198
- Joined: Thu Feb 10, 2005 11:20 am
- Location: TN, USA
I'd go the cheap route.
Consider http://www.jab-tech.com/product.php?productid=3774 or http://www.digiconcepts.com/arcticcooli ... ies_05.htm depending on cost after S&H to your zip code and hard wire them to 5 volts.
The last time I did a Solo I used the Scythe 92mm that jab-tech had but it hasn't been in stock in so long I don't expect it to ever be in stock again.
Consider http://www.jab-tech.com/product.php?productid=3774 or http://www.digiconcepts.com/arcticcooli ... ies_05.htm depending on cost after S&H to your zip code and hard wire them to 5 volts.
The last time I did a Solo I used the Scythe 92mm that jab-tech had but it hasn't been in stock in so long I don't expect it to ever be in stock again.
-
- Posts: 2049
- Joined: Thu Dec 15, 2005 11:06 am
- Location: Klamath Falls, OR
Based on cost/noise level, the Arctic Cooling AF9225, widely available in the US of A for ~$5 (see Google/products) is a good choice when undervolted. Newegg is currently out of stock, but there are lots of other sources.