Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Posts: 95
Joined: Sat Aug 20, 2005 3:01 am


Post by TheAtomicKid » Sun Aug 30, 2009 11:21 pm ... frame.html

Looks pretty good, if you have steel innards in your case. If you're aluminum, you'll have to get creative.


Posts: 124
Joined: Sat May 31, 2008 2:33 am
Location: Australia

Post by Hypernova » Mon Aug 31, 2009 4:29 am

Interesting idea. But I would think that most SPCR'ers don't use run fans to levels where vibration are a concern. And since steel cases (especially P18X) are dampened by nature it's utility are even more suspect.

Posts: 1386
Joined: Fri Jun 18, 2004 6:53 pm

Post by JazzJackRabbit » Mon Aug 31, 2009 7:43 am

I'm not convinced. I had some silicon frames almost exactly like this one, except they didn't go all the way around the fan and as far as I remember they didn't do much to reduce vibrations.

If you want to reduce vibrations soft mounting is the only way.

Post Reply