Control: management of fans, temp/rpm monitoring via soft/hardware
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
Shawn O
- Posts: 30
- Joined: Sat Jan 03, 2004 8:30 pm
Post
by Shawn O » Wed Jan 07, 2004 9:42 am
Greetings,
Are there any differences between the two?If so what are they?
I can only get the TL1A(92mm) locally.
Also,I have a 120mm Panaflo for exhaust.Does it matter that the intake fan is smaller?I plan to undervolt both.
Thanks,
Shawn
-
miker
- Patron of SPCR
- Posts: 798
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Akron, OH (The Rubber Capital)
-
Contact:
Post
by miker » Thu Jan 08, 2004 10:07 am
Not really sure why you need an intake fan if you have a 120mm exhaust. Anyway, I think teh difference is as noted above. The TL1A is 15mm thick, while the standard L1A is 25mm.
-
lenny
- Patron of SPCR
- Posts: 1642
- Joined: Wed May 28, 2003 10:50 am
- Location: Somewhere out there
Post
by lenny » Thu Jan 08, 2004 10:25 am
I'd suspect a typo. Looks like a normal 92mm L1A to me from the blurry photo. But $23! Gods! SVC does not have the L version, but M and H are less than $6 each.
-
miker
- Patron of SPCR
- Posts: 798
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Akron, OH (The Rubber Capital)
-
Contact:
Post
by miker » Thu Jan 08, 2004 10:29 am
I know Panaflo make a TL1A in the 60mm variety. It is 15mm thick. Either this is a typo or Panaflo makes a new 92mm x 15mm fan.
-
Shawn O
- Posts: 30
- Joined: Sat Jan 03, 2004 8:30 pm
Post
by Shawn O » Thu Jan 08, 2004 12:46 pm
But $23!
Welcome to Canada
.
-
Shawn O
- Posts: 30
- Joined: Sat Jan 03, 2004 8:30 pm
Post
by Shawn O » Thu Jan 08, 2004 1:17 pm
miker wrote:I know Panaflo make a TL1A in the 60mm variety. It is 15mm thick. Either this is a typo or Panaflo makes a new 92mm x 15mm fan.
I should have it by tomorrow.I'll let you know.
-
Shawn O
- Posts: 30
- Joined: Sat Jan 03, 2004 8:30 pm
Post
by Shawn O » Thu Jan 08, 2004 1:26 pm
miker wrote:Not really sure why you need an intake fan if you have a 120mm exhaust. Anyway, I think teh difference is as noted above. The TL1A is 15mm thick, while the standard L1A is 25mm.
I'm trying to create some positive pressure to see if I can make my supersilencer quieter.
-
Shawn O
- Posts: 30
- Joined: Sat Jan 03, 2004 8:30 pm
Post
by Shawn O » Wed Jan 14, 2004 10:15 am
Well,it turned out to be a bx model.Other than that, it looks the same.
-
herosformula
- Posts: 231
- Joined: Wed Apr 16, 2003 11:40 am
- Location: seattle, wa
Post
by herosformula » Wed Jan 14, 2004 12:15 pm
BX gets you RPM monitoring