Hi Folks,
I have a 6200A AGP (Chaintech SA62A) and would like to put the VF900 on it. Zalman's website says that the VF900 won't work with the 6600 series (AGP). It says nothing about the 6200. Has anybody tried the VF900 on the 6200A?
Thanks,
Brad
Does the VF900 work with a 6200A AGP? Zalman is unclear.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
How much overkill are we talking?
Thanks Darthan,
How much overkill are we talking? Could I get away with the Zalman northbridge flower heatsink (ZM-NBF47)? Or do I need at least the ZM-80?
Thanks for the wisdom,
Brad
How much overkill are we talking? Could I get away with the Zalman northbridge flower heatsink (ZM-NBF47)? Or do I need at least the ZM-80?
Thanks for the wisdom,
Brad
Well, given that the VF900 will work on a 80-100W X1900XTX (I'm not sure exactly what the number is, but you get the idea) and the 6200 is going to use probably no more than 20W and certainly no more than 30W it's more than enough power. I'm not saying don't get it. Depending on availability it may be your best choice. I'm just saying that while it is a good quiet cooler, you could get something like this. Any decent passive cooler ought to work on that card if you have reasonable airflow in your system. And silent is always good, right?
To answer your original question, measure the distance between the mounting holes for the stock cooler on your card. If the distance is more than 7.5cm (a hair less than 3in.) then the VF900 won't work. If the holes are close enough together, I see no reason the VF900 wouldn't work.
To answer your original question, measure the distance between the mounting holes for the stock cooler on your card. If the distance is more than 7.5cm (a hair less than 3in.) then the VF900 won't work. If the holes are close enough together, I see no reason the VF900 wouldn't work.
-
- Posts: 274
- Joined: Sun Aug 14, 2005 10:12 pm
- Location: Sydney, Australia