AMD A64 X2 TDP Poll

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Stereodude
Posts: 66
Joined: Sun Nov 26, 2006 8:00 am
Location: Detroit Metro Area

Post by Stereodude » Sun Dec 17, 2006 7:35 am

My AM2 4200+ (65W) is all screwy too.
AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: B, Stepping: 2
Extended CPUID: Family: F, Model: 4B, Stepping: 2
CPUID String: 40FB2
Processor APIC: 0
Processor: Low-Power Mobile AMD Sempron 4100+ (Unknown)
CPU Speed: 2210.06 (200.91 x 11.0)
Revision:
Platform: Socket 939
Startup VCore: 1.100v
Maximum Case Temperature = 49C
But I found this disclaimer:
AMD64 TCaseMax is beeing discontinued, due to the fact that new AMD chips
(Rev F) don't have TCaseMax in them anymore. Unless I find another way to
add support for Rev F chips. AMD64 TCaseMax will probably not be
updated anymore.
Thanks everyone for using my program, I hope you found it useful.
Top
winguy
Posts: 447
Joined: Tue Nov 02, 2004 9:31 am

Post by winguy » Sun Dec 17, 2006 8:46 am

Does Core Temp v0.94 work for AM2 CPUs?
Top
Stereodude
Posts: 66
Joined: Sun Nov 26, 2006 8:00 am
Location: Detroit Metro Area

Post by Stereodude » Sun Dec 17, 2006 10:45 am

winguy wrote:Does Core Temp v0.94 work for AM2 CPUs?
Yes, it works on my 4200+ (65W) AM2. It doesn't correctly ID the CPU, but it shows the speed correctly and has the temperatures of both cores.
Top
Vittorinox
Posts: 5
Joined: Mon Dec 18, 2006 7:23 pm

Post by Vittorinox » Mon Dec 18, 2006 7:26 pm

Hi! :)

I'm new on this forum and these are my info:

AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: B, Stepping: 1
Extended CPUID: Family: F, Model: 2B, Stepping: 1
CPUID String: 20FB1
Processor APIC: 0
Processor: AMD Athlon 64 X2 4600+ (Manchester)
CPU Speed: 1005.15 (201.03 x 5.0)
Revision: BH9-E4
Platform: Socket 939
Startup VCore: 1.300v
Maximum Case Temperature = 55C
TDP: 65.0 Watts


Ah! The speed is set to 1005 because I've enabled Cool'n Quiet. :wink:
Top
Vittorinox
Posts: 5
Joined: Mon Dec 18, 2006 7:23 pm

Post by Vittorinox » Mon Dec 18, 2006 7:31 pm

Only a question....

What is it the TDP?!? :roll:

NOTHING!

I read the response here. :oops:
Top
Mariner
Friend of SPCR
Posts: 260
Joined: Thu Jan 06, 2005 11:25 am

Post by Mariner » Wed Jan 10, 2007 7:58 am

AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 3, Stepping: 2
Extended CPUID: Family: F, Model: 23, Stepping: 2
CPUID String: 20F32
Processor APIC: 0
Processor: Dual Core AMD Opteron 165 (Toledo)
CPU Speed: 1808.29 (200.92 x 9.0)
Revision: JH9-E6
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 57C
TDP: 75.0 Watts
Top
J. Sparrow
Posts: 414
Joined: Wed Jan 17, 2007 7:55 am
Location: EU

Post by J. Sparrow » Wed Jan 17, 2007 11:50 am

Do you still update the poll? However, here's mine:

Opteron 165,Toledo,JH9-E6,1.35V,85.0W

AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 3, Stepping: 2
Extended CPUID: Family: F, Model: 23, Stepping: 2
CPUID String: 20F32
Processor APIC: 0
Processor: Dual Core AMD Opteron 165 (Toledo)
CPU Speed: 2700.00 (300.00 x 9.0)
Revision: JH9-E6
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 59C
TDP: 85.0 Watts
Top
s_xero
Posts: 154
Joined: Sun Sep 10, 2006 2:56 pm

Post by s_xero » Tue Jan 30, 2007 5:14 am

My CPU:

X2-4400+, Toledo, JH9-E6, 55°C, 1.35V, 65.0W / 40.6W

With Ninja Fanless, but Noctua @ 650 RPM in top in P180: max 56C
----------
- What does the dubble TDP mean?
- Off-topic but: May I be able to undervolt without problems, while CnQ is enabled?

Thanks, and You're Welcome! :D
Top
casebuyer
Posts: 119
Joined: Mon Jan 29, 2007 10:30 pm

Post by casebuyer » Sun Feb 04, 2007 6:46 am

can anyone explain me what is the importance of this numbers
how to read this info
i mean what is it good for
i couldnt understand what all these info means
Top
nici
Posts: 3011
Joined: Thu Dec 16, 2004 8:49 am
Location: Suomi Finland Perkele

Post by nici » Sun Feb 04, 2007 6:57 am

Basically it gives you some idea of how much heat your CPU might produce.

Mr. Sparrow--> I posted the same info on the previous page ;) Though now i run mine at 2600mHz and 1.3V.
Top
GUNNER
Posts: 66
Joined: Mon Apr 11, 2005 8:16 pm
Location: Memphis, TN
Contact:
Contact GUNNER

Post by GUNNER » Thu Mar 22, 2007 6:34 pm

AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: B, Stepping: 1
Extended CPUID: Family: F, Model: 2B, Stepping: 1
CPUID String: 20FB1
Processor APIC: 0
Processor: AMD Athlon 64 X2 3800+ (Manchester)
CPU Speed: 2010.30 (201.03 x 10.0)
Revision: BH9-E4
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 63C
TDP: 65.6 Watts
Top
MrBean
Posts: 14
Joined: Thu Mar 22, 2007 5:44 pm
Location: Netherlands

Post by MrBean » Sun Mar 25, 2007 8:45 am

:lol: crap.

I run an undervolted AMD 64 X2 4200+ EE (ADO4200IAA5CU)
This TCaseMax tool doesnt know it.
No TDP given, 939 reported (its 65Wtdp, AM2 in fact).
Its official startup voltage isnt 1.100V, but 1.25-1.35V (if I remember correctly).

Good undervolting:
5x216MHz @0.90V
9x216MHz @1.03V
11x216MHz @1.20V

It never reaches 65W, thats for sure.


AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: B, Stepping: 2
Extended CPUID: Family: F, Model: 4B, Stepping: 2
CPUID String: 40FB2
Processor APIC: 0
Processor: Low-Power Mobile AMD Sempron 4100+ (Unknown)
CPU Speed: 2376.26 (216.02 x 11.0)
Revision:
Platform: Socket 939
Startup VCore: 1.100v
Maximum Case Temperature = 49C

Written by: Arthur Liberman.
Idea by: Petr Koc.
More info at: http://www.thecoolest.zerobrains.com/fo ... c.php?t=83
Top
Torajirou
Posts: 162
Joined: Wed Sep 05, 2007 6:16 am
Location: Belgium

Post by Torajirou » Sat Oct 13, 2007 12:28 am

Apparently, the author has stopped updating it, and it's no longer available from the download link.

Could anyone upload it for me, please ? :(
Top
dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Post by dhanson865 » Sun Oct 14, 2007 4:43 pm

I have a copy archived on another PC. I'll have to look at the licensing agreement on it and see if it is ok to for me to post it.

Until then let me drop this in here

AMD64 TCaseMax - v1.19
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: B, Stepping: 1
Extended CPUID: Family: F, Model: 2B, Stepping: 1
CPUID String: 20FB1
Processor APIC: 0
Processor: AMD Athlon 64 X2 4200+ (Manchester)
CPU Speed: 2211.38 (201.03 x 11.0)
Revision: BH9-E4
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 61C
TDP: 95.0 / 59.4 Watts

I bought that processor Aug 01 2006 but never got around to posting this. Looks to be a good one compared to the other two 4200s on the first page

X2-4200+, BH9-E4, 63°C, 1.35V, 65.6W
X2-4200+, BH9-E4, 67°C, 1.35V, 78.1W
Top
Torajirou
Posts: 162
Joined: Wed Sep 05, 2007 6:16 am
Location: Belgium

Post by Torajirou » Sun Oct 14, 2007 11:25 pm

dhanson865 wrote:I have a copy archived on another PC. I'll have to look at the licensing agreement on it and see if it is ok to for me to post it.
Thanks a lot ! Looking forward to reading from you soon ! ;)
Top
Torajirou
Posts: 162
Joined: Wed Sep 05, 2007 6:16 am
Location: Belgium

Post by Torajirou » Mon Oct 15, 2007 2:10 pm

Nevermind, I just realised CoreTemp, from the same author, encapsulated TCaseMax's functionality...

So I'll just post my results ^^


X2-4600+, JH9-E6, 59°C, 1.35V, 85W
Top
Post Reply

Return to “CPUs and Motherboards”