SLK-900-A

Cooling Processors quietly

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Kostik
*Lifetime Patron*
Posts: 391
Joined: Wed Apr 16, 2003 7:51 am
Location: Paris, France

SLK-900-A

Post by Kostik » Fri Aug 01, 2003 3:47 am

A new version of the SLK-900.

Nothing revolutionary, they just changed the shape a little bit, so that it fits more motherboards.
[size=75][url=http://www.pcsilencieux.com]PC Silencieux[/url] (french website)[/size]

UrbanVoyeur
Posts: 94
Joined: Sat May 03, 2003 4:02 pm
Location: Brooklyn, NY, USA
Contact:

Post by UrbanVoyeur » Fri Aug 01, 2003 6:47 am

oh my. i want 2 for my next beast.
http://www.urbanvoyeur.com

TheJTrain
Posts: 20
Joined: Wed Jul 30, 2003 10:47 am

Post by TheJTrain » Fri Aug 01, 2003 9:14 am

Anybody know who carries them yet?

marc999
*Lifetime Patron*
Posts: 230
Joined: Sat Oct 26, 2002 4:05 pm
Location: Calgary, Alberta, Canada

Post by marc999 » Fri Aug 01, 2003 12:26 pm

Sweet !! Now there's an SLK-900 that has the classic clip style retention mechinism that will work with my Tualatin MOBO !! :D
Now the only question is, do I want to fork over the change for the upgrade from an SLK 800-A :?:

miker
Patron of SPCR
Posts: 798
Joined: Sun Aug 11, 2002 3:26 pm
Location: Akron, OH (The Rubber Capital)
Contact:

Post by miker » Fri Aug 01, 2003 12:38 pm

marc999 wrote:Sweet !! Now there's an SLK-900 that has the classic clip style retention mechinism that will work with my Tualatin MOBO !! :D
Now the only question is, do I want to fork over the change for the upgrade from an SLK 800-A :?:
I wouldn't. I mean, I know its better, but is it really that much better?
Also, I still haven't found a 92mm fan that I would rather use than an 80mm L1A.
[img]http://sfgames.clicksplat.com/userwmjrusso45Zdfttextw000000ZbgbodywFFFFFFZbgheaderwFF9900Zborderw3366FFZoptiontextw3366FF/9/fold.gif[/img]

marc999
*Lifetime Patron*
Posts: 230
Joined: Sat Oct 26, 2002 4:05 pm
Location: Calgary, Alberta, Canada

Post by marc999 » Fri Aug 01, 2003 12:46 pm

Yeah, that's a good point. However, I think my SLK-800 isn't what it used to be. My hypothesis is that because I've taken it on and off so many times (we won't get into why) the clip has somehow bent out a bit and therefore it isn't pushing down as hard onto the CPU. I've wondered if I should try and bend the clip a bit up to gain a bit of the pressure back. Hmmm.

miker
Patron of SPCR
Posts: 798
Joined: Sun Aug 11, 2002 3:26 pm
Location: Akron, OH (The Rubber Capital)
Contact:

Post by miker » Fri Aug 01, 2003 12:49 pm

That's what I did to my old Zalman 6000, it worked wonders. Then I switched to bolt-on HSF :)
[img]http://sfgames.clicksplat.com/userwmjrusso45Zdfttextw000000ZbgbodywFFFFFFZbgheaderwFF9900Zborderw3366FFZoptiontextw3366FF/9/fold.gif[/img]

AndrewC
Posts: 174
Joined: Wed Apr 02, 2003 7:16 pm
Location: Mobile, AL

Post by AndrewC » Fri Aug 01, 2003 4:07 pm

You can get them here.

axle
Posts: 64
Joined: Sat Oct 26, 2002 3:06 pm
Location: Wind Gap, PA
Contact:

Post by axle » Mon Aug 04, 2003 4:57 pm

Oh, marveolus. I ordered an SLK-900U for my Abit NF7 (v1- I'll proabaly have a hard time fitting it on, right?) YESTERDAY.

:( Live and learn. And then get better Luck.
.::Fanless::.

Post Reply