MY SILENT HTPC - ANTEC NSK2400
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
MY SILENT HTPC - ANTEC NSK2400
Hello every one, after a month of installation modding and temp checking
I finally finish my HTPC :
Antec NSK 2400 (380 PSU fan swap to Nexus 80mm Fan SP802512L-03
Gigabyte Motherboard GA-MA69GM-S2H
AMD Athlon Dual-Core +4400 (65w / 65nm)
HDD WD SATA 250GB AAKS
HDD WD IDE Notebook 60GB
Scythe Mini Ninja CPU Heatsink Fanless
Zalman ZM-NBF47 Fanless Northbridge Cooler
2 X Scythe S-Flex 1200 RPM
Zalman ZM-MFC2 (Fix the view angle problem)
Hauppauge WinTV-PVR-150 MCE
Lite-ON SATA DVD RW X 20 LH-20A1S
Here is some number:
CPU:
Idle 35c – 37c (31c - 32c with Cool & Quiet )
Load 47c – 50c
Fans set to 780 rpm
Scythe Mini Ninja CPU Heatsink Fanless
PSU (after fan swap - Nexus 80mm Fan SP802512L-03) in idle mode:
Fan set to 1000 rpm
Exhaust temp 29c – 30c
Heatsink 35c – 37c
The fan swap take me no more than 15 mints
Northbridge (after heatsink change - Zalman ZM-NBF47)
Heatsink temp is 42c – 44c (66c – 68c with the original heatsink)
The 2 HDD was suspended horizontal and not vertical,
With elastic clothes-type material, it is not the nicest suspnded,
But the result was fantastic!!!
I will late the picture talk………
PSU fan swap :
The PSU is out of the case...
The PSU is out of the case...
The fan is out...
The original fan...
The fan connector...
The new Nexus fan is in...
The new Nexus fan is in...
The new Nexus fan is in...
The exhaust temp sensor...
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The mobo layout...
The back of the case...
Fixing the view angle problem of the zalman screen...
Fixing the view angle problem of the zalman screen...
Fixing the view angle problem of the zalman screen...
The final result...
The final result at night...
Enjoy
I finally finish my HTPC :
Antec NSK 2400 (380 PSU fan swap to Nexus 80mm Fan SP802512L-03
Gigabyte Motherboard GA-MA69GM-S2H
AMD Athlon Dual-Core +4400 (65w / 65nm)
HDD WD SATA 250GB AAKS
HDD WD IDE Notebook 60GB
Scythe Mini Ninja CPU Heatsink Fanless
Zalman ZM-NBF47 Fanless Northbridge Cooler
2 X Scythe S-Flex 1200 RPM
Zalman ZM-MFC2 (Fix the view angle problem)
Hauppauge WinTV-PVR-150 MCE
Lite-ON SATA DVD RW X 20 LH-20A1S
Here is some number:
CPU:
Idle 35c – 37c (31c - 32c with Cool & Quiet )
Load 47c – 50c
Fans set to 780 rpm
Scythe Mini Ninja CPU Heatsink Fanless
PSU (after fan swap - Nexus 80mm Fan SP802512L-03) in idle mode:
Fan set to 1000 rpm
Exhaust temp 29c – 30c
Heatsink 35c – 37c
The fan swap take me no more than 15 mints
Northbridge (after heatsink change - Zalman ZM-NBF47)
Heatsink temp is 42c – 44c (66c – 68c with the original heatsink)
The 2 HDD was suspended horizontal and not vertical,
With elastic clothes-type material, it is not the nicest suspnded,
But the result was fantastic!!!
I will late the picture talk………
PSU fan swap :
The PSU is out of the case...
The PSU is out of the case...
The fan is out...
The original fan...
The fan connector...
The new Nexus fan is in...
The new Nexus fan is in...
The new Nexus fan is in...
The exhaust temp sensor...
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The 2 HDD suspended horizontal......
The mobo layout...
The back of the case...
Fixing the view angle problem of the zalman screen...
Fixing the view angle problem of the zalman screen...
Fixing the view angle problem of the zalman screen...
The final result...
The final result at night...
Enjoy
Last edited by udi13 on Mon Dec 10, 2007 2:22 am, edited 7 times in total.
Re: MY SILENT HTPC - ANTEC NSK2400
real easy to hotlink if you want to:
copy link location, click Img button in the post, paste link and click img button again
copy link location, click Img button in the post, paste link and click img button again
Nice setup! I'm considering the same heatsinks, motherboard, and case. I like your solution to help cool down the NB. Did you need to modify the inside of the case to allow easier access to the SATA (see http://www.avsforum.com/avs-vb/showthre ... 348&page=6 ) ports?
-
- Posts: 22
- Joined: Mon Dec 10, 2007 10:37 pm
- Location: Sweden
Another question for you, did you ever try the stock mounting solution for the hard drives? I found it to be a little annoying at first, but it seems to do the trick as far as vibrations go... but maybe not?
Looks like your system is really quiet, I'm jealous. But hopefully soon mine will be configured like it.
Looks like your system is really quiet, I'm jealous. But hopefully soon mine will be configured like it.