New rig in Antec P182 *56K WARNING*

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

New rig in Antec P182 *56K WARNING*

Post by Silviu » Sat Jan 19, 2008 4:32 am

Hello all,

Thought I'd share my almost quiet rig (will hopefully become near silent once i get a new cpu cooler and in future replace the PSU fan/and Antec TriCools).
At the moment the PSU fan or the PSU itself makes an buzz sound at night i can hear it, and TriCools on low are pretty acceptable but on medium .. i can`t stand them :P computer is close to me ~half meter
Hope to get in future an Xigmatek HDT-S1283 for CPU, and 3/4 120 Nexus fans to replace the PSU and the standard TriCools

Specs:
Cpu: Intel Core2 Duo E6750 2.6666 MHz ( Stock cooler/MHz )
Motherboard: Gigabyte GA-P35-DS3
Ram: Corsair 2 x 1024 MB DDR2 / 800 MHz / 5-5-5-12
Video: Leadtek WinFast PX8800 GTS TDH 320 MB ( Stock cooler always at 60%/MHz )
Hdd: Western Digital WS3200AAKS 320 GB
PowerSuply: Sirtec HPC-430-P12S 430 W
Case: Antec P182

Temps: (idle/load, ambient ~24*C) ( all 3 TriCools on low )
CPU: ~25*C/~40*C
VGA( Core not ambient ): ~55*C/~70*C
HDD: ~33*C/~35*C
MB: ~38*C/~44*C

Now the pictures (sorry for quality and size)
Btw, if u have any ideeas how to improve the cable management let me know
Comments/Critique welcome.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Silviu on Sat Jan 19, 2008 8:45 am, edited 2 times in total.

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Post by djkest » Sat Jan 19, 2008 5:38 am

Nice. But as a general rule your pictures are too big. I think Mike wants a limit of 1024 or 800 pixels wide, I can't remember which.

cienislaw
Posts: 54
Joined: Tue Jul 25, 2006 9:28 pm
Location: Poland

Post by cienislaw » Sat Jan 19, 2008 6:00 am

photos are too big and blurred man, please replace them with better quality or remove, because in such form they show nothing.

seraphyn
Posts: 322
Joined: Wed Nov 28, 2007 1:26 pm
Location: Netherlands

Post by seraphyn » Sat Jan 19, 2008 6:57 am

cienislaw wrote:photos are too big and blurred man, please replace them with better quality or remove, because in such form they show nothing.
Nonsense. If he just resizes them they'll be fine.

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Post by djkest » Sat Jan 19, 2008 7:50 am

I'm curious as to why you chose an 8800GTS 320MB, unless that video card was something you've had for a while. There is some better stuff out now for less moneys.

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Post by djkest » Sat Jan 19, 2008 8:04 am

Here you go. Resized, and thumbnailed. I'm not a web expert, but I do believe this is the preferred method?

*edited once the OP resized his pictures*
Last edited by djkest on Sat Jan 19, 2008 9:31 am, edited 1 time in total.

Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

Post by Silviu » Sat Jan 19, 2008 8:27 am

Thank u for resizing them, i will make them in Acdsee and edit my post.
And yes the rest of components i have them for ~ 3 4 months
And for clarity, is not my camera and was all made in a hurry

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Post by djkest » Sat Jan 19, 2008 8:29 am

I resize mine in PAINT. Just click Image> Sketch/Skew> and then select 50% for horizontal and vertical. Boom, image is chopped down in size. You can even go to 40% if the image isn't very detailed.

Strid
Posts: 397
Joined: Tue Jan 08, 2008 5:09 am
Location: Copenhagen, Denmark

Post by Strid » Sat Jan 19, 2008 8:33 am

But is it quiet?? :?

Critique/comments?? Replace those stock HSFs, they hurt my eyes!! :lol:

By the way, nice build, thinking of getting that exact mother board too along with a E8x00... Cable management seems all right, perhaps a round cable for the CD-ROM - doesn't look obstructive at all to me. Just out of curiosity, is that the stock PSU or did you put it there??

Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

Post by Silviu » Sat Jan 19, 2008 8:48 am

PSU is not stock, is an sirtec 430w
Now i`m mad i did not buy an corsair with better cable management
All components are ~ 4 months old, only the case is new
And btw, i resised all pics up :)

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Post by djkest » Sat Jan 19, 2008 9:32 am

I'm curious as to where in the world you are located. It seems you might be in Europe somewhere? Can you put a location in your user profile? It's nice to know what kind of products are available near you. BTW, welcome to SPCR!

Eagle156
Posts: 60
Joined: Sun Sep 23, 2007 12:39 pm

Post by Eagle156 » Sat Jan 19, 2008 9:40 am

I have almost the exact same system as you, except I have an E6600 instead of the E6700. The stock cooler isn't that bad actually, usually it will never spin more than 1300rpm or so. Temps aren't great with it but I don't care. BTW, how did you route your SATA cable? The pics don't really show. I have the same mobo so the same SATA cable as well, and I found it was too short to run behind the mobo tray so I just put it through the plastic cable manager.

Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

Post by Silviu » Sat Jan 19, 2008 9:41 am

Thank u, i`m from Romania :)

Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

Post by Silviu » Sat Jan 19, 2008 9:49 am

Eagle156 wrote:I have almost the exact same system as you, except I have an E6600 instead of the E6700. The stock cooler isn't that bad actually, usually it will never spin more than 1300rpm or so. Temps aren't great with it but I don't care. BTW, how did you route your SATA cable? The pics don't really show. I have the same mobo so the same SATA cable as well, and I found it was too short to run behind the mobo tray so I just put it through the plastic cable manager.
Between the lower HDD cage and the case ( floppy part ) is a small whole i routed it thru there :)

Silviu
Posts: 17
Joined: Fri Nov 30, 2007 11:11 pm
Location: Romania

Post by Silviu » Wed Jul 28, 2010 8:19 am

Wooden PC updated
CPU: Intel Core i7 860 2.80GHz / Cooler ZEROtherm ZEN FZ120 / Ventilator Enermax Cluster 120
Motheboard: Gigabyte GA-P55A-UD4 F12 bios
Ram: 2x Corsair 4GB DDR3 1333MHz CL9 XMS3 PC3-10600 Dual Channel Kit ( 8 GB )
HDD: Solid State Disk Kingston 40GB SATA-II V series for OS
HDD2: Western Digital 320GB SATA-II AAKS for data
Power Suply: Corsair CMPSU-650HX Modular
Case: Antec P182 / 3x Scythe Gentle Typhoon 120 mm 800 rpm
DvdRw: Samsung SH-S223Q
Video Card: Gigabyte GTX 460 OC 1 GB GV-N460OC-1GI
Mouse: Logitech G9X
Keyboard: Logitech G15
Monitor: Samsung T240 + Samsung T240HD
Sound: Logitech X540 / Logitech microphone
OS: Windows 7 x64 Ultimate genuine
UPS: APC BE700G-GR
Image
Image
Image
Image
Image
Image
Image

Post Reply